HB 674-1992 镶齿套式面铣刀D=80~200mm.pdf

相关资源

HB 679-1992 加工轻合金用焊硬质合金刀片的镶齿套式面铣刀 D=100~200mm.pdf

HB 680-1992 镶齿套式面铣刀 D=250~315mm.pdf

HB 683-1992 加工轻合金用焊硬质合金刀片的镶齿套式面铣刀 D=250~315mm.pdf

HB 721-1992 镶齿套式面铣刀用高速钢刀齿.pdf

HB 722-1992 加工轻合金镶齿套式面铣刀用高速钢刀齿.pdf

JB T 7954-1999 镶齿套式面铣刀.pdf

JB T 7954-2013 镶齿套式面铣刀.pdf

HB 680-1992 镶齿套式面铣刀 D=250～315mm.pdf

HB 674-1992 镶齿套式面铣刀 D=80～200mm.pdf

猜你喜欢

JIS R1639-3-1999 Test methods of properties of fine ceramic granules Part 3：Drying loss.pdf

JIS R1639-4-1999 Test methods of properties of fine ceramic granules Part 4：Flowability.pdf

JIS R1639-5-2007 Test methods of properties of fine ceramic granules Part 5：Compressive strength of a single granule.pdf

JIS R1639-6-2007 Test methods of properties of fine ceramic granules Part 6：Compressive behavior of the granule beds.pdf

JIS R1640-2002 Methods for the quantitative phase analysis of silicon nitride.pdf

JIS R1641-2007 Testing method for dielectric of fine ceramic plates at microwave frequency.pdf

JIS R1642-1-2002 The test method for internal friction test of fine ceramics at elevated temperatures -- Part 1：Free decay method by the torsion pendulum.pdf

JIS R1642-2-2002 The testing method for internal friction of fine ceramics at elevated temperatures -- Part 2：Flexural resonance method.pdf

JIS R1643-2002 Testing methods for interlaminar shear strength of continuous fiber-reinforced ceramic composites.pdf