HB 6931-1994 数控铣床用六齿削平型直柄球头立铣刀 d=32~63mm.pdf

相关资源

HB 6930-1994 数控铣床用四齿削平型直柄球头立铣刀d=10~63mm.pdf

HB 6929-1994 数控铣床用二齿削平型直柄球头立铣刀d=6~28mm.pdf

HB 6930-1994 数控铣床用四齿削平型直柄球头立铣刀.pdf

HB 6929-1994 数控铣床用二齿削平型直柄球头立铣刀.d=6～28mm.pdf

HB 6930-1994 数控铣床用四齿削平型直柄球头立铣刀.d=10～12mm.pdf

HB 6931-1994 数控铣床用六齿削平型直柄球头立铣刀.d=32～63mm.pdf

猜你喜欢

JIS R9301-3-5-1999 Alumina powder -- Part 3：Methods of chemical analysis -- 5：Determination of silicon oxide (IV) content.pdf

JIS R9301-3-6-1999 Alumina powder -- Part 3：Methods of chemical analysis -- 6：Determination of iron oxide (III) content.pdf

JIS R9301-3-7-1999 矾粉.第3部分化学分析方法.第7节氧化钛(IV)含量测定.pdf

JIS R9301-3-8-1999 矾粉.第3部分化学分析方法.第8节氧化钙含量测定.pdf

JIS R9301-3-9-1999 矾粉.第3部分化学分析方法.第9节氧化钠含量测定.pdf

JIS S0011-2000 Guidelines for all people including elderly and people with disabilities -- Marking tactile dots on consumer products.pdf

JIS S0012-2000 Guidelines for all people including elderly and people with disabilities -- Usability of consumer products.pdf

JIS S0014-2003 老年人和残疾人用指南.pdf

JIS S0014-2009 (追補1)老年人和残疾人用指南.pdf