STAS 11099-1990 Electrical equipment for motor vehicles Starters General technical require ments for quality《汽车启动的电气设备 一般质量技术要求 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 20321.1-2006 离网型风能、太阳能发电系统用逆变器.第1部分 技术条件.pdf

GB T 20321.2-2006 离网型风能、太阳能发电系统用逆变器.第2部分 试验方法.pdf

GB T 20322-2006 石油及天然气工业用往复压缩机.pdf

GB T 20323.1-2006 铣刀代号.第1部分;整体或镶齿结构的带柄立铣刀.pdf

GB T 20323.2-2006 铣刀代号.第2部分;装可转位刀片的带柄和带孔铣刀.pdf

GB T 20324-2006 G系列圆柱管螺纹圆板牙.pdf

GB T 20325-2006 六方板牙.pdf

GB T 20326-2006 粗长柄机用丝锥.pdf

GB T 20327-2006 车刀和刨刀刀杆.截面形状和尺寸.pdf