STAS 11346 5-1979 FERROPHOSPHORUS Determination of sulphur content《磷铁 硫含量的测定》.pdf

相关资源

GB T 33828-2017 纳米磷酸铁锂中三价铁含量的测定方法.pdf

GB T 33828-2017 纳米磷酸铁锂中三价铁含量的测定方法.pdf

JIS G 1320-2007 Ferrophosphorus -- Methods for determination of phosphorus content《磷铁 磷含量的测定方法》.pdf

GOST 17001 5-1986 Ferrosilicozirconium Methods for determination of phosphorus《锆硅铁 磷的测定方法》.pdf

GOST 15933 3-1990 Ferroniobium Method for determination of phosphorus《铁铌合金 磷的测定方法》.pdf

GOST 13217 5-1990 Ferrovanadium Methods for determination of phosphorus《铁钒合金 磷的测定方法》.pdf

TCVN 3865-1983 Ferrotitanium Method for the determination of phosphorus content《钛铁 磷含量的测定方法》.pdf

GOST 14250 4-1990 Ferrotitanium Method for determination of phosphorus《铁钛合金 磷的测定方法》.pdf

GOST 14638 3-1981 Ferrotungsten Method for the determination of phosphorus《铁钨合金 磷的测定方法》.pdf

YB T 4532-2016 磷铁 磷含量的测定 酸碱滴定法.pdf

猜你喜欢

STAS SR ISO 7530-4-1995 Nickel alloys Flame atomic absorption spectrometric analysis Part 4 Determination of copper content《镍合金 火焰原子吸收光谱分析 第4部分：测定铜含量 》.pdf

STAS SR ISO 7531-1996 Wire rope slings for general purposes - Characteristics and specifications《一般用途的钢丝吊绳 特性和规格 》.pdf

STAS SR ISO 7539-1-1987 Corrosion of metals and alloys Stress corrosion testing Part 1 General guidance on testing procedures《金属和合金的腐蚀 应力腐蚀测试 第1部分：测试程序的一般指导》.pdf

STAS SR ISO 7539-2-1994 Corrosion of metals and alloys Stress corrosion testing Part 2 Preparation and use of bent-beam specimens《金属和合金的腐蚀 应力腐蚀试验 第2部分：弯梁试样的制备和应用》.pdf

STAS SR ISO 7539-3-1994 Corrosion of metals and ailoys Stress corrosion testing Part 3 Preparation and use of U-bend specimens《金属和合金的腐蚀 应力腐蚀试验 第3部分：U形弯头试样的制备和应用》.pdf

STAS SR ISO 7539-4-1993 Corrosion of metals and alloys Stress corrosion testing Part 4 Preparation and use of uniaxially loaded tension specimens《金属和合金的腐蚀 应力腐蚀试验 第4部分：轴向载荷拉伸试样的制备和使.pdf

STAS SR ISO 7547-1995 Air-conditioning and ventilation of accomodation spaces on board ships - Design conditions and basis of calculations《船上空调和起居仓的通风设备 设计条件和计算基础 》.pdf

STAS SR ISO 7571-1995 Woodworking machines - Surface planing machines with cutterblock for one-side dressing - Nomenclature and acceptance conditions《单面刨光用带组合铣刀的平面刨床 专用术语和验收条件 》.pdf

STAS SR ISO 7583-1995 Anodizing of aluminium and its alloys Vocabulary《铝及铝合金阳极氧化 词汇表 》.pdf