STAS 12414-1986 Pnemnalic thnid powers RADLAL PISTON MOTORS Types and basic dimensions《气动液体动力 径向活塞发动机类型和基本参数 》.pdf

相关资源

JB T 11047.1-2010 脱硫包 第1部分 基本参数.pdf

JB T 11813.1-2014 纵剪机 第1 部分：型式和基本参数.pdf

JB T 3356-1992 低温液体容器 基本参数.pdf

JB T 6391.1-1992 起重机滑接输电装置 型式和基本参数.pdf

MT 330-1993 XG.XC系列 立井大型多绳箕斗卸载设备基本参数.pdf

MT 331-1993 JL系列 立井大型多绳箕斗基本参数.pdf

GB T 5170.20-2005 电工电子产品环境试验设备 基本参数检定方法 水试验设备.pdf

GB T 5170.21-2008 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台.pdf

GB T 5170.5-1996 电工电子产品环境试验设备基本参数检定方法 湿热试验设备.pdf

CB- 3180-1983 船用离心式泥泵型式与基本参数.pdf

猜你喜欢

ASTM F3248-17 Standard Test Method for Determining Vertical Deformation and Area Deflection of Area Elastic, Point Elastic, Combined Elastic and Mixed Elastic Sport and Dance Surfaces.pdf

ASTM C1672-17 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer.pdf

ASTM D6090-17 Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method).pdf

ASTM C203-05a(2017) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation.pdf

ASTM D7750-12(2017) Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer.pdf

ASTM A553 A553M-17 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel.pdf

ASTM D4185-17 Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry.pdf

ASTM C1701 C1701M-17a Standard Test Method for Infiltration Rate of In Place Pervious Concrete.pdf

ASTM D6144-17 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography.pdf