1、MIL-C-W (2) 47 m mqwx 043h53 4 m 2-J f I MIL-C-83390 (USAF) c AMENDMENT 2 27 July 1976 SUPERSEDING AMENDMENT 1 5 September 1974 MILITARY SPECIFICATION CONNECTOR, HOSE, QUICK-ACTING, MALE, ANTI-G GARMENT This amendment forms a part of Military Specification MIL-C-83390 (USAF) dated 1 September 1972.
2、Page 1, paragraph 2.1, Federal Specifications: Add ltQQ-A-20O/3 Aluminum Alloy Bar, Rod, Shapes, Tube, and Wire, Extruded, 2024“ and I1QQ-A-225/6 Aluminum Alloy Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished, 2024“. Page 1, paragraph 2.1, Military Specifications: Add “MIL-A-8625 Anodic Coatings
3、 for Aluminum and Aluminum Alloys“. a Page 2, paragraph 3.3.1: used to fabricate the body of the connector shall be aluminum alloy 2024, temper T4 of QQ-A-200/3 or QQ-A-225/6 and shall be anodized and dyed black in accordance with type II of MIL-A-8625.“ Delete “Allt in the fifth line and substitut
4、e “Unless otherwise specified in figure 1, all“. Between the second and third sentences add “The metal Page 3, paragraph 3.5.2: Delete and substitute: “3.5.2 Emergency pressure relief. When an anti-g garment, pressurized to 8 psi, is disconnected from the air pressure source, the connector shall pro
5、vide for deflation of the anti-g garment to 1.5 (plus or minus 0.25) psi internal pressure within 4 seconds. The anti-g garment shall maintain the internal pressure of not less than 0.3 psi for a 4-hour period. Page 4, figure 1: this amendment. Delete and substitute the figure 1 that forms page 2 of
6、 Page 5, paragraph 3.7, second line: Delete tTSU-12/PIt and substitute iCSU-12/P, CSU-l3A/P, or CSU-l3B/P“. Reviewer: Air Force - 99 Custodian: Air Force - 11 Preparing activity: Air Force - 11 Proj ect No. 4730-F628 *U.S, GOVERNMENT PRINTING OFFICE: 1976-603-766/6170 FSC 4730 i- ,- f - Provided by
7、IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL- C- 83 390 (USAF) AMENDMENT 2 -c 7 NOSE PIECE MIL-C-A3390 (2) 47 97777Ob 04365b4 b m t o LI.14D (MAX) t- 2.75 (MAX) - 4 !e- FIGURE 1. Connector -, 129 -.o2 x 4 5“ t 2l- .OX R NOTES: DIMENSIONS ARE IN IIJCHES. TOLERANES: BREAK SHARP EDGES DECIMALS f ,010 ANGLES i 030 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
