1、I - MIL-L-38484 (5) 42 I 9999906 0458023 5 -5 - MIL-L-38484 ( USAF) AMENDWT 5 9 February 1977 SUPERSEDING AMENDMENT 4 29 October 1910 -eii - MILITARY SPECIFICATION LIFE PRESERVERS, UNDERARM, PNEUMATIC This 41 ndment forms a part of Military Specification MIL-L-38484 (USAF) dated 12 December 1966. PA
2、GE 1 2.1 : Under SPECIFICATIONS , Military add : “MIL-P-3454 Packaging And Packing Of Life Preservers“ PAGE 2 2.1: Under DRAWINGS add: “5956709 Harness - Personnel Parachute , Chest, Assembly Of I PAGE 5 * 3.6.1, lines 10, 11, and 12: Delete “0.15 pound per square inch (PSI) 20 seconds after dischar
3、ge of the Cylinger and 1.0 PSI 45 seconds after discharge of the Cylinders“ and substitute l.50 pound per square inch (PSI 1.0 minutes after discharge of the Cylinder.“ PAGE 6 * 3.7.3: Add the following sentences. “The inflation assembly shall be Model FLU-l/P in accordance with revision B to MIL-L-
4、27639 dated 16 November 1966. MIL-L-27639 shall not be used.“ The Model FLU-1A/P in accordance with revision C to PAGE 7 4.1, second sentence: Delete and substitute: “Except as otherwise specified i the contract or order, the supplier may use his own or any other failities suitable for the performan
5、ce of the inspection requirements apeaified herein, unless disapproved by the Government. I Following 4.1 add: “4.1.1 Conformance of components and materials. The contractor shall provide certification as to the conformance of all components and materiais to the requirements of their respective appl
6、icable documents. This certification shall include test data (see 6.2) from inspections conducted at the contractors facility or at his sources facility.“ FSC 4220 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-L-38484 (5) 42 M 774b 04580214-7 W
7、 MIL-L-38484 (USAI?) AMENDMENT 4 Following 4.3.4 add: “4.3.5 Test harness. The contractor shall provide a Type ME-1 parachute harness conforming to Drawing 5956709-30 and modified in accordance with the applicable technical order specified in 6.6. be used to perform the operation test of 4.6.2 for t
8、he LPU-3/P life preserver. may be substituted.“ This harness shall A suitable vest with zippers located in the correct Dosition PAGE 9 * 4.6.2, lines 9 thru 14: Delete “The minimum internal cell pressure 20 seconds after discharge of the Cylinders shall be 0.15 PSI. internal cell pressure 45 seconds
9、 after discharge of the Cylinders shall be 1.0 PSI“ and substitute “The flotation Cells shall inflate to a minimum of .50 PSI 1.0 minutes after discharge of the Cylinder.“ The minimum PAGE 11 Following 4.6.12 add: “4.7 Inspection of Preparation for delivery requirements. Sample items or packs and th
10、e inspection of the preservation, packaging, packing, and marking for shipment and storage shall be in accordance with the require- ments of Section 5, or the documents specified therein.“ Section 5: Delete in its entirety and substitute: “5. PREPARATION FOR DELIVERY “5.1 Preservation, packaging, pa
11、c!sing, and marking of the life preservers shell be in accordance with level A, B, or C of MILP-3454, as specified (see 6.2). or MIL-P-3454, the unit, intermediate, and exterior containers shall be marked as follows: “5.2 In addition to any special markings required by the contract, order, LIFE PRES
12、ERVER, UNDERARM, PNEUMATIC LPU-3/P (OR LPU-lO/P AS APPLICABLE) WITH CARBON DIOXIDE FOR INFLATION, MIEL38484 (USAF) 6.2: Delete and substitute: “c. Test data requirements (DD Form 1423). (See 4.1.1 and 4,4.1.1).“ 6.2g: Dedete and substitute: “g. SeleCOion of applicable levels of preservation, packagi
13、ng, and packing, 1 Page 2 of 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-i l MIL-L-38484 (5) 42 M 7777906 0458025 7 MIL-L-38484(USAF) AMENDMENT 5 6.3: Delete and substitute: “6.3 Standard color sama. Request for access to a standard color sampl
14、e for the cell should be addressed to the San Antonio Air Materiel Area, Engineering Division (MMEDO) , Kelly AFB Texas 78241.“ Following 6.4 add: “6.5 SuuersedinR data. The Type LPU-1O/P life preserver covered by this specification replaces the me LPU-2/P life preserver covered by “6.6 Modification
15、 of Type ME-1 uarachute harness The applicable MIL-L-26558B ( USAF ) technical order for modification of the Type ME-1 parachute harness is T.O. 1482-3-21 (See 4.3.5).“ * Concluding material: Delete and substitute the following: “Custodian : Air Force - 99 Preparing Activity: Air Force - 99“ The mar
16、gins of this amendment are marked with an asterisk to indicate where changes (additions , modifications , corrections, deletions) from the previous amendment were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bid
17、ders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous amendment. Custodian : Air FoEce - 99 Page 3 of 3 Preparing Activity: Air Force - 99 Project go. 4220-F230 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
