1、Printed in U.S.A.A SS EAMERICAN SOCIETY OFSAFETY ENGINEERSAMERICAN NATIONAL STANDARDANSI/ASSE A10.17 2006 (R2011)ANSI/ASSE A10.17 2006 (R2011)ANSI/ASSE A10.17 2006 (R2011)Safe Operating Practices for Hot Mix Asphalt (HMA) ConstructionAmerican National Standardfor Construction and Demolition Operatio
2、nsThe information and materials contained in this publication have been developed from sources believed to be reliable. However, the American Society of Safety Engineers (ASSE) as secretariat of the ANSI accredited A10 Committee or individual committee members accept no legal responsibility for the
3、correctness or completeness of this material or its application to specific factual situations. By publication of this standard, ASSE or the A10 Committee does not ensure that adherence to these recommendations will protect the safety or health of any persons, or preserve property. ANSI ANSI/ASSE A1
4、0.17 2006 (R2011) American National Standard Construction and Demolition Operations Safe Operating Practices for Hot Mix Asphalt (HMA) Construction Secretariat American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 Approved May 19, 2011 American National Standa
5、rds Institute, Inc. Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review
6、, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolu
7、tion. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he/she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The
8、 American National Standards Institute does not develop standards and will in no circumstance give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American Nation
9、al Standards Institute. Requests for interpretation should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Inst
10、itute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published July 2011 by American Society of Safet
11、y Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 (847) 699-2929 www.asse.org Copyright 2011 by American Society of Safety Engineers All Rights Reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior wr
12、itten permission of the publisher. Printed in the United States of America American National Standard Foreword (This Foreword is not a part of American National Standard A10.17-2006 (R2011).) This standard is one of a series of safety standards that have been formulated by the Accredited Standards C
13、ommittee on Safety in Construction and Demolition Operations, A10. It is expected that the standards in the A10 series will find a major application in industry, serving as a guide to contractors, labor, and equipment manufacturers. For the convenience of users, a list of existing and proposed stand
14、ards in the A10 series for Safety Requirements in Construction and Demolition Operations follows. A10.1 Pre-Project/Pre-Task Safety the employ-ees exposure level or estimated exposure level; a description of any personal protective and res-piratory equipment used or to be used; and information from
15、pre-vious medical examinations of an employee that is not otherwise available to the examining physi-cian. 6. The employer shall receive a written opinion from the examining physician which will include: a. The results of the medical examinations. b. The physicians opinion as to whether the employee
16、 has any medical conditions that would place the employee at increase risk of material impairment of the employees health from asphalt fume exposure or hazardous substances. c. Any recommended limita-tions on the employee or upon the use of personal protective equipment such as clothing or respirato
17、rs. d. A statement that the physician has informed the employee of the results of the medical examination and any medical conditions that require further explanation or treatment. 7. The employer will provide a copy of the written opinion to the employee. 8. The employer will maintain an accurate re
18、cord of each employees medical examinations. The record will include the name, social security number, description of the employees duties, written opinion and any employee com-plaints related to exposure to asphalt fumes. The employer shall retain the (medical examination) records for the length of
19、 employ-ment plus 30 years. 9. The employer shall make the medical records available for examination and copying by the employees or former employees. 10. During examinations, appli-cants or employees found to have medical conditions which would be directly or indirectly aggravated by exposure to as
20、phalt type fumes shall be counseled on the in-creased risk of impairment of their health by working with this sub-stance. 11. In the event of illness known or suspected to be due to asphalt fumes, a physical examination shall be conducted in accordance with this section before the affec-ted person r
21、eturns to work. 4.6.9 If exposure to other chemicals also occurs, as is the case when asphalt is mixed with a solvent, emulsified or used concurrently with other materials such as tar or pitch, provisions of any applicable standard for the other chemicals shall also be followed to establish the mixt
22、ures Threshold Limit Values. 4.6.10 If hazardous chemicals or fumes are present in the asphalt mixture, warning signs shall be posted. Precautions should AMERICAN NATIONAL STANDARD A10.17-2006 (R2011) 19 be taken to prevent exposure of personnel to any amounts of hazardous chemicals or fumes in exce
23、ss of the TLVs as either liquid or vapor. Appropriate corrective measures shall be taken to eliminate the hazard or provide personal protective equipment. 4.6.11 When mineral dusts are present above the Threshold Limit Value, the possible contributions of silica dust and asbestos microfibers to caus
24、ing pulmonary disease shall be evaluated. Appropriate corrective action shall be taken to minimize the exposure of employees to such dusts (i.e. personal protective equipment). 4.6.12 All labels and warnings shall be printed in English. Illiterate workers and workers reading languages other than tho
25、se used on labels and posted signs shall receive information regarding hazardous areas and shall be informed of the instructions printed on the labels and signs. Labels shall be designed for the life cycle of the product. 4.6.13 Labels shall be affixed in a readily visible position on all tanks and
26、containers of hot liquid asphalt type materials containing the following information utilizing ANSI/SAE J 115, Safety Signs, for format and design: DANGER HOT ASPHALT MAY CAUSE SEVERE BURNS Do not get in eyes or on skin. Use only with adequate ventilation. Wear safety glasses, face shield, gloves an
27、d protective clothing when handling. First Aid. In case of asphalt type materials contact with eyes, immediately flush eyes with plenty of water for at least 15 minutes. In case of contact with skin, immerse affected part in cold water. If ice is available, pack ice on the asphalt adhering to the sk
28、in or apply an emergency cold pack. If difficulty in breathing occurs after inhalation, remove victim to fresh air and keep warm and quiet. If breathing stops, give artificial respiration. Call a physician as quickly as possible. AMERICAN NATIONAL STANDARD A10.17-2006 (R2011) 20 4.6.14 Labels shall
29、be affixed in a readily visible position on all tanks and containers of cold liquid asphalt utilizing ANSI/SAE J 115, Safety Signs, and ANSI/NEMA Z535.2, Environmental and Facility Safety Signs, or ANSI/NEMA Z535.4, Product Safety Signs and Labels, for format and design: DANGER (*ASPHALT) HARMFUL IF
30、 SWALLOWED MAY BE IRRITATING TO SKIN AND EYESDo not get in eyes or on skin. Do not take internally. Use only with adequate ventilation. Wear safety glasses, face shield, gloves and protective clothing when handled. First Aid. Obtain medical attention as quickly as possible. In case of contact with e
31、yes, flush eyes immediately with plenty of water for at least 15 minutes. In case of contact with skin, wash affected area with detergent and water. If swallowed, give milk or olive oil. DO NOT INDUCE VOMITING *Insert whatever is appropriate. 4.6.15 The following warning signs shall be posted in rea
32、dily visible locations on or near all equipment generating asphalt fumes: signs shall be posted in accordance with ANSI/SAE J 115. DANGER ASPHALT FUMES EXPOSURE AREA HIGH CONCENTRATIONS OF FUMES MAY CAUSE NOSE AND EYE IRRITATION FIRE HAZARD If respirators are required for protection from asphalt fum
33、es, the following statement shall be added in large letters to the required sign. RESPIRATORY PROTECTION IS REQUIRED IN THIS AREA In any area where it is likely that emergency situations will arise from accidental skin or eye contact or other excessive exposure to asphalt or asphalt type fumes, sign
34、s required by this section shall be supplemented by additional signs giving emergency and first aid instructions and procedures and the location of first aid supplies and emergency equipment, including respiratory protective equipment. AMERICAN NATIONAL STANDARD A10.17-2006 (R2011) 21 4.6.16 Enginee
35、ring controls (primary), administrative controls (secondary), or personal protective equipment shall be used to maintain concentrations of asphalt type fumes below the recommended exposure limit (Threshold Limit Values). When a respirator is required by this section, it shall be selected from a list
36、 of respirators approved for use in accordance with the following requirements: 1. Respiratory protective pro-gram meeting the requirements of ANSI/AIHA Z88.2 shall be estab-lished and implemented. 2. When employees are ex-pected to be or are exposed above the Threshold Limit Values, recom-mended re
37、spirators shall be pro-vided, and employees shall use the respirators provided. 3. Respirators shall be ade-quately cleaned and maintained and employees shall be instructed and trained at least annually in the proper maintenance and testing for leakage of respirators assigned to them. 4. Respirators
38、 shall be easily accessible and employees shall be informed of their location. 5. When a self-contained breathing apparatus is used in atmospheres with asphalt type fumes in concentrations greater than 50 milligram per cubic meter, standby workers with suitable res-cue and communications equip-ment
39、must be present. 6. Written standard operating procedures governing the selec-tion and use of respirators will be established. 7. Respirators will be selected on the basis of hazards to which the worker is exposed. 8. Respirator users will be in-structed and trained in the proper use of respirators
40、and their limi-tations. 9. Respirators will be regularly cleaned and disinfected after each shift. 10. Respirators will be stored in a convenient, clean and sanitary location. 11. Routinely used respirators will be inspected during cleaning and worn or deteriorated parts replaced. Respirators for em
41、ergen-cy use must be thoroughly in-spected at least once a month and after each use. 12. Respirators will be assigned to workers for their exclusive use. 13. Appropriate surveillance of work area conditions and the degree of employee exposure or stress will be maintained contin-uously during operati
42、ons requiring respiratory protection. 14. Regular inspections and evaluations will be conducted to determine the continued effect-iveness of the program. 15. No employee will be assigned to tasks requiring the use of a respirator until a physician has determined that they are phys-ically able to per
43、form the work while using a respirator. 16. Only NIOSH/MSHA certified respiratory protection will be used by employees. AMERICAN NATIONAL STANDARD A10.17-2006 (R2011) 22 17. Respirators listed in this table are in order of increasing pro-tection. The assigned protection factors in the table are a me
44、asure of the minimum anticipated work place level of respiratory protection that would be provided by a properly functioning respirator or class of respirators and are based on the NIOSH Respirator Decision Logic (NIOSH Publications No. 87-108). Respirator Selection Guide for Asphalt Fumes Protectio
45、n Factor Respirator 10 Any air-purifying half-mask respirator equipped with appropriate gas/vapor car-tridges in combination with any type of particulate filter. Any full face piece respirator with appropriate gas/vapor cartridges in combination with a dust or mist or fume filter; dust and mist filt
46、er; or dust, mist, and fume filter. Any supplied-air respirator equipped with a half-mask and operated in a demand (negative pressure) mode. 25 Any powered air-purifying respirator equipped with a loose-fitting hood or helmet. Any supplied-air respirator equipped with a hood or helmet and operated i
47、n a continuous flow mode. 50 Any air-purifying full face piece respirator equipped with appropriate gas/vapor cartridges in combination with a high efficiency filter or an appropriate canister incor-porating a high efficiency filter. Any powered air-purifying respirator with a tight-fitting face pie
48、ce equipped with appropriate gas/vapor cartridges in com-bination with a high efficiency filter or an appropriate can-ister incorporating a high effi-ciency filter. Any supplied-air respirator equipped with a full face piece and operated in a demand (negative pressure) mode. Any supplied-air res-pir
49、ator equipped with a tight-fitting face piece and oper-ated in continuous flow mode. Any self-contained respirator equipped with a full face piece and operated in a demand (negative pressure) mode. 1,000 Any supplied-air respirator equipped with a half-mask and operated in a pressure demand or other positive pressure mode. 2,000 Any supplied-air respirator equipped with a full face piece and operated in a pressure demand or other positive pressure mode. 10,000 Any self-contained respirator equipped with a full face piece and operated in a pressure demand or other positive p
