1、 American National Standard for Financial Services ANSI X9.100-151-2010 (R2017) Check Correction Strips Accredited Standards Committee X9, Incorporated Financial Industry Standards Date Approved: July 20, 2010 Date Reaffirmed: January 13, 2017 American National Standards Institute American National
2、Standards, Technical Reports and Guides developed through the Accredited Standards Committee X9, Inc., are copyrighted. Copying these documents for personal or commercial use outside X9 membership agreements is prohibited without express written permission of the Accredited Standards Committee X9, I
3、nc. For additional information please contact ASC X9, Inc., 275 West Street, Suite 107, Annapolis, MD 21401. This page left intentionally blank ANSI X9.100-151-2010 (R2017) ASC X9, Inc. 2017 All rights reserved iii Contents Page Foreword . v Introduction vi 1 Scope 1 2 Normative References . 1 3 Ter
4、ms and Definitions . 1 3.1 aligning edge (ANSI X9.100-160-1). 1 3.2 clear band (MICR) (ANSI X9.100-20) 1 3.3 correction label (ANSI X9.100-151) 1 3.4 face (ANSI X9.100-151) 2 3.5 height (ANSI X9.100-151) 2 3.6 leading edge (ANSI X9.100-160-1) 2 3.7 length (ANSI X9.100-151) 2 3.8 magnetic ink charact
5、er recognition (MICR) (ANSI X9.100-20) 2 3.9 piggyback (ANSI X9.100-151) . 2 3.10 trailing edge (ANSI X9.100-160-1) 2 4 Symbols and Abbreviated Terms . 2 5 General . 2 6 Strip Characteristics . 3 6.1 Length . 3 6.2 Height 3 6.3 Thickness . 3 6.4 Paper . 3 6.5 Printing . 3 6.6 Reflectance . 3 7 Strip
6、 Attachment 3 7.1 Machine Attachment . 3 7.2 Lap Attachment 3 7.3 Butt Attachment, Film . 3 7.4 Butt Attachment, Paper . 4 7.5 Manual Attachment . 4 8 Strip Characteristics after Attachment 4 8.1 Adhesive . 4 8.2 Sealing 4 8.3 Alignment . 4 8.3.1 Gap 4 8.3.2 Parallelism 4 8.3.3 Strip Length 4 8.4 He
7、ight 5 8.5 Overlap . 5 8.6 Thickness . 5 8.7 Encodability . 5 8.8 Removal 5 8.9 Reapplication . 5 8.10 Carrier Stripping 5 ANSI X9.100-151-2010 (R2017) iv ASC X9, Inc. 2017 All rights reserved 8.11 Correction Labels 5 Annex A (normative) Conversion Chart . 8 Annex B (informative) Strip Functions 9 B
8、.1 Operator 9 B.2 Application Equipment 9 B.3 Strip Function. 9 B.4 Strip Removal . 9 Figures Figure 1 Current Types of Strips 6 Figure 2 Side View of Strips . 7 ANSI X9.100-151-2010 (R2017) ASC X9, Inc. 2017 All rights reserved v Foreword Approval of an American National Standard requires verificat
9、ion by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected int
10、erests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their exis
11、tence does not in any respect preclude anyone, whether he has approved the standards or not from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circ
12、umstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretation should be addressed to the secre
13、tariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken to reaffirm, revise, or withdraw this standard no
14、 later than five years from the date of approval. Published by Accredited Standards Committee X9, Incorporated Financial Industry Standards 275 West Street, Suite 107 Annapolis, MD 21401 USA X9 Online http:/www.x9.org Copyright 2017 ASC X9, Inc. All rights reserved. No part of this publication may b
15、e reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher. Published in the United States of America. ANSI X9.100-151-2010 (R2017) vi ASC X9, Inc. 2017 All rights reserved Introduction NOTE The users attention is called to the possibi
16、lity that compliance with this standard may require use of an invention covered by patent rights. By publication of this standard, no position is taken with respect to the validity of this claim or of any patent rights in connection therewith. The patent holder has, however, filed a statement of wil
17、lingness to grant a license under these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such a license. Details may be obtained from the standards developer. Suggestions for the improvement or revision of this Standard are welcome. They should be sent
18、 to the X9 Committee Secretariat, Accredited Standards Committee X9, Inc., Financial Industry Standards, 275 West Street, Suite 107, Annapolis, MD 21401 USA. This Standard was processed and approved for submittal to ANSI by the Accredited Standards Committee on Financial Services, X9. Committee appr
19、oval of the Standard does not necessarily imply that all the committee members voted for its approval. At the time this standard was approved, the X9 committee had the following members: Roy CeCicco, X9 Chairman Vincent DeSantis, X9 Vice-Chairman Steve Stevens, Executive Director Janet Busch, Progra
20、m Manager Organization Represented Representative ACI Worldwide . Doug Grote American Bankers Association C. Diane Poole American Express Company . Ted Peirce Apriva . Len Sutton BAFT/IFSA . Dan Taylor Bank of America . Daniel Welch Certicom Corporation . Daniel Brown Citigroup, Inc. . Karla McKenna
21、 CUSIP Service Bureau James Taylor Deluxe Corporation John FitzPatrick Diebold, Inc. . Bruce Chapa Federal Reserve Bank . Claudia Swendseid First Data Corporation . Rick Van Luvender Fiserv . Skip Smith FIX Protocol Ltd . Jim Northey Harland Clarke . John McCleary IBM Corporation . Todd Arnold Indep
22、endent Community Bankers of America . Viveca Ware Ingenico . John Spence J.P. Morgan Chase a defect in the MICR printing, a processing need to add information to a previously encoded strip, to redirect the processing destination of the check, for better document compatibility with some statement stuffing equipment, or for aesthetic reasons prior to returning the check in the payors statement. Removal of the strip is a critical step and the technique to be used should be compatible with the strip. The strip should be removed by means that do minimal damage to the check.
