1、Page 1 of 6 2017 ASHRAE. All Rights reserved. ERRATA SHEET FOR ANSI/ASHRAE STANDARD 169-2013 Climatic Data for Building Design Standards January 12, 2017 The corrections listed in this errata sheet apply to all copies of ANSI/ASHRAE Standard 169-2013. The outside back cover marking identifying the f
2、irst printing is “Product code: 86179 11/13”. The shaded items have been added since the previously published errata sheet dated November 3, 2016 was distributed. NOTE: Additions are shown in underline and deletions are shown in strikethrough. Page(s) Erratum 56 A3. CLIMATE ZONE DEFINITIONS To deter
3、mine the climate zones for locations not listed in this standards, use the following information to determine climate zone numbers and letters. Determine the thermal climate zone, 08, from Table A-3, using the heating and cooling degree-days for the location. Determine the moisture zone (Marine, Dry
4、 or Humid): a. If monthly average temperature and precipitation data are available, use the Marine, Dry, and Humid definitions below to determine the moisture zone (C, B, or A). b. If monthly or annual average temperature information (including degree-days) and only annual precipitation (i.e. annual
5、 mean) are available, use the following to determine the moisture zone: 1. If thermal climate zone is 3 and CDD50F 4500 (CDD10C 2500), climate zone is Marine (3C). 2. If thermal climate zone is 4 and CDD50F 2700 (CDD10C 1500), climate zone is Marine (4C). 3. If thermal climate zone is 5 and CDD50F 1
6、800 (CDD10C 1000), climate zone is Marine (5C). and the third criteria below for determining the Dry/Humid threshold if not Marine (C). c. If only degree-day information is available, use the following to determine the moisture zone: 1. If thermal climate zone is 3 and CDD50F 4500 (CDD10C 2500), cli
7、mate zone is Marine (3C). 2. If thermal climate zone is 4 and CDD50F 2700 (CDD10C 1500), climate zone is Marine (4C). 3. If thermal climate zone is 5 and CDD50F 1800 (CDD10C 1000), climate zone is Marine (5C). It is not possible to assign Dry/Humid splits in this case. Page 2 of 6 2017 ASHRAE. All R
8、ights reserved. 13 Table A-4 United States Stations and Climate Zones State/LOCATION WMO # C Z Alaska ANNETTE ISLAND AP 703980 5AC KETCHIKAN INTL AP 703950 5AC KLAWOCK 703894 5AC SITKA JAPONSKI AP 703710 5AC 24-25 Table A-5 Canada Stations and Climate Zones Province/LOCATION WMO # CZ British Columbi
9、a BONILLA ISLAND (AUT) 714840 5AC CUMSHEWA ISLAND 717710 5AC HERBERT ISLAND (AUT) 714850 5AC HOLLAND ROCK 712190 5AC LANGARA 718990 5AC LUCY ISLAND LIGHTSTATION 712200 5AC PORT HARDY A 711090 5AC PRINCE RUPERT A 718980 5AC SANDSPIT A 711010 5AC SARTINE ISLAND (AUT) 714780 5AC SOLANDER ISLAND (AUT) 7
10、14790 5AC 61 TABLE A-6 International Stations and Climate Zones. The city Slavonski Brod is incorrectly located under the country of Slovenia, the city is actually located in Croatia. In Table A-6 move Slavonski Brod from Slovenia (SVN) on page 61 to Croatia (HRV) on page 38. 69 Figure B-1 Climate z
11、ones for United States counties. In Figure B-1 change moisture zone “Moist (A)” to “Humid (A)”. 70 Table B-1 U.S. Climate Zones by State and County State/County Zone Alaska Ketchikan Gateway 5AC Prince of WalesOuter Ketchikan 5AC Sitka 6A5C WrangellPetersburg 86A Update the following figures: B1 (U.
12、S. Counties), C7 (North America) and C12 (Canada). Changes are imperceptible when viewed at letter size resolution. Page 3 of 6 2017 ASHRAE. All Rights reserved. Page 69 Figure B1 updated (changes are on the pacific coast of Alaska, 4 counties near Juneau, AK) Page 4 of 6 2017 ASHRAE. All Rights res
13、erved. Page 90 Figure C7 updated (changes are on the west coast British Columbia and near Juneau, Alaska) Page 5 of 6 2017 ASHRAE. All Rights reserved. Page 95 Figure C12 updated (changes are on the west coast in Haida Gwaii, formerly Queen Charlotte Islands) Page 6 of 6 2017 ASHRAE. All Rights reserved. 82 Table B-1 U.S. Climate Zones by State and County State/County Zone West Virginia (WV) Zone 4A 5A except