ANSI ASME B16.23-2016 Cast Copper Alloy Solder Joint Drainage Fittings DWV.pdf

上传人:ownview251 文档编号:431708 上传时间:2018-11-11 格式:PDF 页数:94 大小:891.76KB
下载 相关 举报
ANSI ASME B16.23-2016 Cast Copper Alloy Solder Joint Drainage Fittings DWV.pdf_第1页
第1页 / 共94页
ANSI ASME B16.23-2016 Cast Copper Alloy Solder Joint Drainage Fittings DWV.pdf_第2页
第2页 / 共94页
ANSI ASME B16.23-2016 Cast Copper Alloy Solder Joint Drainage Fittings DWV.pdf_第3页
第3页 / 共94页
ANSI ASME B16.23-2016 Cast Copper Alloy Solder Joint Drainage Fittings DWV.pdf_第4页
第4页 / 共94页
ANSI ASME B16.23-2016 Cast Copper Alloy Solder Joint Drainage Fittings DWV.pdf_第5页
第5页 / 共94页
点击查看更多>>
资源描述

1、Cast Copper Alloy Solder Joint Drainage Fittings: DWVAN AMERICAN NATIONAL STANDARDASME B16.23-2016(Revision of ASME B16.23-2011)ASME B16.23-2016(Revision of ASME B16.23-2011)Cast CopperAlloy SolderJoint DrainageFittings: DWVAN AMERICAN NATIONAL STANDARDTwo Park Avenue New York, NY 10016 USADate of I

2、ssuance: January 16, 2017The next edition of this Standard is scheduled for publication in 2021.ASME issues written replies to inquiries concerning interpretations of technical aspects of thisStandard. Periodically certain actions of the ASME B16 Committee may be published as Cases.Cases and interpr

3、etations are published on the ASME Web site under the Committee Pages athttp:/cstools.asme.org/ as they are issued.Errata to codes and standards may be posted on the ASME Web site under the Committee Pages toprovide corrections to incorrectly published items, or to correct typographical or grammatic

4、al errorsin codes and standards. Such errata shall be used on the date posted.The Committee Pages can be found at http:/cstools.asme.org/. There is an option available toautomatically receive an e-mail notification when errata are posted to a particular code or standard.This option can be found on t

5、he appropriate Committee Page after selecting “Errata” in the “PublicationInformation” section.ASME is the registered trademark of The American Society of Mechanical Engineers.This code or standard was developed under procedures accredited as meeting the criteria for American NationalStandards. The

6、Standards Committee that approved the code or standard was balanced to assure that individuals fromcompetent and concerned interests have had an opportunity to participate. The proposed code or standard was madeavailable for public review and comment that provides an opportunity for additional publi

7、c input from industry, academia,regulatory agencies, and the public-at-large.ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.ASME does not take any position with respect to the validity of any patent rights asserted in connection with anyitems me

8、ntioned in this document, and does not undertake to insure anyone utilizing a standard against liability forinfringement of any applicable letters patent, nor assumes any such liability. Users of a code or standard are expresslyadvised that determination of the validity of any such patent rights, an

9、d the risk of infringement of such rights, isentirely their own responsibility.Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted asgovernment or industry endorsement of this code or standard.ASME accepts responsibility for only those int

10、erpretations of this document issued in accordance with the establishedASME procedures and policies, which precludes the issuance of interpretations by individuals.No part of this document may be reproduced in any form,in an electronic retrieval system or otherwise,without the prior written permissi

11、on of the publisher.The American Society of Mechanical EngineersTwo Park Avenue, New York, NY 10016-5990Copyright 2016 byTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERSAll rights reservedPrinted in U.S.A.CONTENTSForeword vCommittee Roster . viiCorrespondence With the B16 Committee viiiSummary of Change

12、s xList of Changes in Record Number Order xi1 Scope . 12 General . 13 Description 14 Pitch (Slope) 15 Abbreviations 16 Size. 17 Marking. 28 Material. 29 Metal Thickness . 210 Inspection Tolerance . 211 Threaded Ends. 212 Configuration of Threaded Ends. 3Figures1 Typical Laying Lengths of DWV 90-deg

13、Elbows . 42 Size Sequence of Fittings . 4Tables1 Inspection Tolerance Table 42 Dimensions of Solder Joint Ends DWV . 53 Dimensions of Threaded Ends DWV . 64 Dimensions of DWV Couplings, Reducers, Extended Bushings, andFlush Bushings . 75 Dimensions of DWV Adapters 86 Dimensions of DWV Short Adapters

14、 97 Dimensions of DWV Trap Adapters . 98 Dimensions of C to Soil Pipe Adapter for Joining to Extra Heavy Soil Pipe . 109 Dimensions of C to Soil Pipe Adapter Plain End for Joining to ExtraHeavy Soil Pipe 1110 Dimensions of C H11547 No-Hub Soil Pipe Adapter 1211 Dimensions of C H11547 Hub Soil Pipe A

15、dapter 1312 Dimensions of DWV 45-deg Y With Cleanout Soil Pipe (Spigot) H11547C H11547 Cleanout 1313 Dimensions of DWV Elbows and Double Elbows C H11547 C 1414 Dimensions of Reducing DWV Single and Double Elbows C H11547 C . 1515 Dimensions of DWV Elbows 1616 Dimensions of DWV Reducing Elbows 1717 D

16、imensions of DWV Elbows 1718 Dimensions of DWV Tees and Double Tees 18iii19 Dimensions of DWV Tees and Double Tees 1920 Dimensions of DWV Trap Tees 2021 Dimensions of DWV Double and Quadruple Branch Fittings . 2022 Dimensions of Short Design DWV Tees With Side Inlet(s) (90 deg to Main Inlet),Single

17、and Double . 2023 Dimensions of Short Design DWV Tees With Side Inlet(s) (45 deg to Main Inlet),Single and Double . 2124 Dimensions of Long Design DWV Tees With Side Inlet(s) (90 deg to Main Inlet),Single and Double . 2125 Dimensions of Long Design DWV Tees With Side Inlet(s) (45 deg to Main Inlet),

18、Single and Double . 2226 Dimensions of Single and Double DWV 45-deg Ys 2327 Dimensions of DWV 45-deg Ys . 2428 Dimensions of DWV Horizontal Twin Branch Tees . 2429 Dimensions of DWV Fitting Tees, Single and Double 2430 Dimensions of DWV Utility Tees 2531 Dimensions of DWV Fitting Tees With Side Inle

19、t Maximum BelowCenterline 2632 Dimensions of DWV Long Turn TYs, Single and Double 2733 Dimensions of DWV Double Short TY (CH11547CH11547FH11547F) . 2834 Dimensions of DWV Double Short TY (CH11547CH11547CH11547C) 2835 Dimensions of DWV Elbow With Inlets . 2836 Dimensions of DWV Double Branch Sink Fit

20、tings . 2937 Dimensions of DWV Closet Offset Fittings 2938 Dimensions of DWV 90-deg Closet Elbow . 3039 Dimensions of Floor Flange Vent Support . 3040 Dimensions of DWV Closet Ells With Side Inlet(s) (90 deg and 45 deg)to Main Inlet(s) 3141 Dimensions of DWV Closet Ells With or Without Side Inlet(s)

21、 (90 deg and45 deg) to Main Inlet(s) 3242 Dimensions of DWV Closet Flanges . 3343 Dimensions of Vent Tees and Vent Double Tees 3444 Dimensions of Vent Elbows . 3445 Dimensions of DWV Stack Upturns, Single and Double 3446 Dimensions of Slip Joint Pieces . 3547 Dimensions of Trap Coupling . 3548 Dimen

22、sions of Trap Extended Bushings . 3549 Dimensions of Slip Joint Ends . 3650 Dimensions of DWV Cap . 3651 Dimensions of DWV Plugs . 3652 Dimensions of DWV Drum Traps . 3753 Dimensions of DWV Swivel Drum Traps 3854 Dimensions of DWV Traps 3955 Dimensions of DWV Test Tees With Plug 4056 Dimensions of D

23、WV Plugs . 40Mandatory AppendicesI U.S. Customary Tables 41II References 78Nonmandatory AppendixA Quality System Program 79ivFOREWORDStandardization work on solder joint fittings began in 1936 in Subcommittee 11 of SectionalCommittee A40, Minimum Requirements for Plumbing and Standardization of Plum

24、bingEquipment, organized within the American Standards Association (ASA). It resulted in thepublication, in January 1941, of ASA A40.3-1941. That standard covered only supply (pressure)fittings.In 1949, responsibility for solder joint fittings was transferred to newly formed Subcommittee9 of Section

25、al Committee B16 on Standardization of Pipe Flanges and Fittings. The next revisionof A40.3 appeared as ASA B16.18-1950, Cast-Brass Solder-Joint Fittings. During its development,however, the need for separate standards for wrought copper and wrought bronze supply fittingsand for solder joint drainag

26、e fittings was recognized.Work on the wrought fitting standard was undertaken by a joint committee of the Copper andBrass Research Association and the Manufacturers Standardization Society of the Valve andFittings Industry (MSS). That work, properly reviewed and approved, was published asASA B16.22-

27、1951.Concurrently, in June 1949, at the request of Subcommittee 9, a task group organized by MSSbegan work on a standard for cast brass solder joint drainage fittings. Representatives of allU.S. and Canadian manufacturers were invited to participate. The Report of the CoordinatingCommittee for a Nat

28、ional Plumbing Code was taken into account; special research on wallthickness and depth of solder joint was conducted; and coordination with other standards wassought, to avoid inconsistency. After working through nine drafts to reach consensus, the groupsubmitted an April 1952 draft to Subcommittee

29、 9. After committee, sponsor, and ASA approval,the standard was approved as ASA B16.23-1953, Cast Brass Solder Joint Drainage Fittings, onJanuary 30, 1953.Work soon began on a revision, to include additional sizes, reducing sizes, and additional typesof fittings. A March 1955 draft was approved by t

30、he B16 Committee, sponsors, and ASA, andpublished as ASA B16.23-1955. Starting in 1958, responding to requests for further revision andexpansion, the MSS task group developed a 1959 draft that was approved by Subcommittee 9,the B16 Committee, sponsors, and ASA, and was published as ASA B16.23-1960.I

31、n 1967 and 1968, a complete revision was undertaken, including engineering studies to verifythat a user request for shorter soldering cups was justified. The resulting draft, after approval bySubcommittee 9, USA Standards Committee B16, sponsors, and the (then-called) USA StandardsInstitute, was pub

32、lished as USAS B16.23-1969. An addenda, dated 1973, lengthened the cups onthe three smallest sizes to overcome assembly problems.Thesubcommittee,nowSubcommitteeI,begananewrevisionin1974,resultingintheinclusionof the 1973 addenda, addition of metric equivalents, and change of “bronze” to “copper allo

33、y.”Thedraft,finallyapprovedbythe(againrenamed)AmericanNationalStandardsInstitute(ANSI),was published as ANSI B16.23-1976.In 1982, a new edition updating dimensional tables and metric equivalents was developed.Following approval at all levels, the revision was published as ANSI B16.23-1984.Also in 19

34、82, American National Standards Committee B16 became the ASME B16 StandardsCommittee, operating with the same scope, under ASME procedures accredited by ANSI. Subse-quently, Subcommittee I merged with Subcommittee J, which had a related scope.The 1992 edition removed metric units, establishing U.S.

35、Customary units as the standard.Clarifications and updating changes were made to improve the text. The 2002 edition of B16.23addedSIunitsofmeasureinthemainbodyoftextandmovedU.S.CustomaryunitstoMandatoryAppendix I. A Nonmandatory Appendix for Quality System Programs was added, plus editorialchanges w

36、ere made to improve text. Following approval by the Standards Committee and ASME,approval as an American National Standard was given on February 6, 2002, with the designation,ASME B16.23-2002.vIn the 2011 edition, references to ASME standards were revised to no longer list specific editionyears. Fol

37、lowing approval by the Standards Committee and the ASME Board on PTCS, therevision to the 2002 edition was approved as an American National Standard by ANSI onSeptember 23, 2011 with the new designation, ASME B16.23-2011.In this 2016 edition, provisions have been made to update verbiage and readings

38、. Followingtheapproval bytheASME B16StandardsCommittee,approval asanAmerican NationalStandardwas given by ANSI on October 21, 2016, with the new designation ASME B16.23-2016.viASME B16 COMMITTEEStandardization of Valves, Flanges, Fittings, and Gaskets(The following is the roster of the Committee at

39、the time of approval of this Standard.)STANDARDS COMMITTEE OFFICERSR. M. Bojarczuk, ChairC. E. Davila, Vice ChairC. Ramcharran, SecretarySTANDARDS COMMITTEE PERSONNELA. Appleton, Alloy Stainless Products Co., Inc.J. E. Barker, Dezurik Water ControlsR. W. Barnes, Anric Enterprises, Inc.K. Barron, War

40、d ManufacturingD. C. Bayreuther, Metso Automation, Flow Control DivisionW. B. Bedesem, ConsultantR. M. Bojarczuk, ExxonMobil Research and Engineering Co.A. M. Cheta, Qatar Shell GTLM. A. Clark, NIBCO, Inc.G. A. Cuccio, Capitol Manufacturing Co.J. DAvanzo, Fluoroseal ValvesC. E. Davila, Crane EnergyD

41、. R. Frikken, Becht Engineering Co.R. B. Hai, RBH AssociatesG. A. Jolly, ConsultantSUBCOMMITTEEJCOPPER AND COPPER ALLOY FLANGES, FLANGED FITTINGS, AND SOLDER JOINT FITTINGSA. G. Kireta, Jr., Chair, Copper Development Association, Inc.M. A. Clark, Vice Chair, NIBCO, Inc.E. Lawson, Secretary, The Amer

42、ican Society of MechanicalEngineersJ. A. Ballanco, JB Engineering and Code Consulting PCS. L. Cavanaugh, Cavanaugh ConsultingW. E. Chapin, Professional Code Consulting, LLCD. R. Frikken, Becht Engineering Co.viiM. Katcher, Haynes InternationalT. A. McMahon, Emerson Process ManagementM. L. Nayyar, NI

43、CEW. H. Patrick, The Dow Chemical Co.D. Rahoi, ConsultantC. Ramcharran, The American Society of Mechanical EngineersR. A. Schmidt, CanadoilJ. Tucker, FlowserveF. R. Volgstadt, Volgstadt however, they should not contain proprietary names orinformation.viiiRequests that are not in the format described

44、 above may be rewritten in the appropriate formatby the Committee prior to being answered, which may inadvertently change the intent of theoriginal request.ASME procedures provide for reconsideration of any interpretation when or if additionalinformation that might affect an interpretation is availa

45、ble. Further, persons aggrieved by aninterpretation may appeal to the cognizant ASME Committee or Subcommittee. ASME does not“approve,” “certify,” “rate,” or “endorse” any item, construction, proprietary device, or activity.Attending Committee Meetings. The B16 Standards Committee regularly holds me

46、etingsand/or telephone conferences that are open to the public. Persons wishing to attend any meetingand/or telephone conference should contact the Secretary of the B16 Standards Committee.ixASME B16.23-2016SUMMARY OF CHANGESFollowing approval by the ASME B16 Committee and ASME, and after public rev

47、iew,ASME B16.23-2016 was approved by the American National Standards Institute onOctober 21, 2016.ASME B16.23-2016 includes the following change identified by a margin note, (16). The RecordNumbers listed below are explained in more detail in “List of Changes in Record Number Order“following this Su

48、mmary of Changes.Page Location Change (Record Number)1 1 In first paragraph, last line revised(12-606)6 Table 3 Notes (3) and (4) revised (12-606)43 Table I-3 Notes (3) and (4) revised (12-606)78 Mandatory Appendix II Revised (16-1574)xLIST OF CHANGES IN RECORD NUMBER ORDERRecord Number Change12-606

49、 Revised Scope, Table footnotes, and Mandatory Appendix II16-1574 Updated Mandatory Appendix II ReferencesxiINTENTIONALLY LEFT BLANKxii(16)ASME B16.23-2016CAST COPPER ALLOY SOLDER JOINTDRAINAGE FITTINGS: DWV1 SCOPEThis Standard establishes specifications for cast cop-per alloy solder joint drainage fittings, designed for usein drain, waste, and vent (DWV) systems. These fittingsaredesignedforusewithseamlesscoppertubeconform-ing to ASTM B306, Copper Drainage Tube (DWV), aswell as fittings intended to be assembled with solderingmaterials conforming to ASTM B32, or taper

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1