ANSI ASME B16.9-2012 Factory-Made Wrought Buttwelding Fittings《工厂制锻钢对焊配件》.pdf

上传人:sofeeling205 文档编号:431742 上传时间:2018-11-11 格式:PDF 页数:52 大小:827.21KB
下载 相关 举报
ANSI ASME B16.9-2012 Factory-Made Wrought Buttwelding Fittings《工厂制锻钢对焊配件》.pdf_第1页
第1页 / 共52页
ANSI ASME B16.9-2012 Factory-Made Wrought Buttwelding Fittings《工厂制锻钢对焊配件》.pdf_第2页
第2页 / 共52页
ANSI ASME B16.9-2012 Factory-Made Wrought Buttwelding Fittings《工厂制锻钢对焊配件》.pdf_第3页
第3页 / 共52页
ANSI ASME B16.9-2012 Factory-Made Wrought Buttwelding Fittings《工厂制锻钢对焊配件》.pdf_第4页
第4页 / 共52页
ANSI ASME B16.9-2012 Factory-Made Wrought Buttwelding Fittings《工厂制锻钢对焊配件》.pdf_第5页
第5页 / 共52页
点击查看更多>>
资源描述

1、AN AMERICAN NATIONAL STANDARD ASME B16.9-2012(Revision of ASME B16.9-2007)Factory-Made Wrought Buttwelding FittingsASME B16.9-2012(Revision of ASME B16.9-2007)Factory-MadeWroughtButtweldingFittingsAN AMERICAN NATIONAL STANDARDTwo Park Avenue New York, NY 10016 USADate of Issuance: February 28, 2013T

2、he next edition of this Standard is scheduled for publication in 2017.ASME issues written replies to inquiries concerning interpretations of technical aspects of thisStandard. Periodically certain actions of the ASME B16 Committee may be published as Cases. Casesand interpretations are published on

3、the ASME Web site under the Committee Pages athttp:/cstools.asme.org/ as they are issued.Errata to codes and standards may be posted on the ASME Web site under the Committee Pages toprovide corrections to incorrectly published items, or to correct typographical or grammatical errorsin codes and stan

4、dards. Such errata shall be used on the date posted.The Committee Pages can be found at http:/cstools.asme.org/. There is an option available toautomatically receive an e-mail notification when errata are posted to a particular code or standard.This option can be found on the appropriate Committee P

5、age after selecting “Errata” in the “PublicationInformation” section.ASME is the registered trademark of The American Society of Mechanical Engineers.This code or standard was developed under procedures accredited as meeting the criteria for American NationalStandards. The Standards Committee that a

6、pproved the code or standard was balanced to assure that individuals fromcompetent and concerned interests have had an opportunity to participate. The proposed code or standard was madeavailable for public review and comment that provides an opportunity for additional public input from industry, aca

7、demia,regulatory agencies, and the public-at-large.ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.ASME does not take any position with respect to the validity of any patent rights asserted in connection with anyitems mentioned in this document,

8、and does not undertake to insure anyone utilizing a standard against liability forinfringement of any applicable letters patent, nor assumes any such liability. Users of a code or standard are expresslyadvised that determination of the validity of any such patent rights, and the risk of infringement

9、 of such rights, isentirely their own responsibility.Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted asgovernment or industry endorsement of this code or standard.ASME accepts responsibility for only those interpretations of this docum

10、ent issued in accordance with the establishedASME procedures and policies, which precludes the issuance of interpretations by individuals.No part of this document may be reproduced in any form,in an electronic retrieval system or otherwise,without the prior written permission of the publisher.The Am

11、erican Society of Mechanical EngineersTwo Park Avenue, New York, NY 10016-5990Copyright 2013 byTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERSAll rights reservedPrinted in U.S.A.CONTENTSForeword ivCommittee Roster . vCorrespondence With the B16 Committee viSummary of Changes vii1 Scope . 12 Pressure Ra

12、tings. 13 Size. 24 Marking . 25 Material . 26 Fitting Dimensions . 37 Surface Contours. 38 End Preparation 39 Design Proof Test 310 Production Tests . 511 Tolerances. 5Figure1 Maximum Envelope for Welding End Transitions 6Tables1 Dimensions of Long Radius Elbows . 72 Dimensions of Long Radius Reduci

13、ng Elbows . 83 Dimensions of Long Radius Returns 94 Dimensions of Short Radius Elbows . 105 Dimensions of Short Radius 180-deg Returns 106 Dimensions of 3D Elbows 117 Dimensions of Straight Tees and Crosses 118 Dimensions of Reducing Outlet Tees and Reducing Outlet Crosses . 129 Dimensions of Lap Jo

14、int Stub Ends . 1510 Dimensions of Caps 1611 Dimensions of Reducers 1712 Welding Bevels and Root Face 1913 Tolerances 20Mandatory AppendicesI Inch Tables . 23II References 37Nonmandatory AppendixA Quality System Program 38iiiFOREWORDIn 1921, the American Engineering Standards Committee, later the Am

15、erican StandardsAssociation (ASA), organized Sectional Committee B16 to unify and further develop nationalstandards for pipe flanges and fittings (and later, for valves, gaskets, and valve actuators). Cospon-sors of the B16 Committee were The American Society of Mechanical Engineers (ASME), theHeati

16、ng and Piping Contractors National Association now the Mechanical ContractorsAssociation of America (MCAA), and the Manufacturers Standardization Society of the Valveand Fittings Industry (MSS). Cosponsors were later designated as cosecretariat organizations.Standardization ofwelding fittings wasini

17、tiated in 1937 bya subgroup (designatedSubgroup 6)of Subcommittee 3. After consideration of several drafts, a standard was approved by theCommittee, cosponsors, and ASA, and published with the designation ASA B16.9-1940.Revisions were made in 1950 and 1955 to add sizes up to NPS 24 and to complete c

18、overageof fittings in some sizes. These revisions were approved and published as ASA B16.9-1951 andASA B16.9-1958. With the subgroup now designated Subcommittee 6 (later Subcommittee F),further revisions were begun to clarify the intent of the standard, to add angularity tolerances,and to include fi

19、ttings of different types (long radius reducing elbows and crosses) and smallersizes (NPS14and NPS12). This revision was published as ASA B16.9-1964 after ASA approval.After reorganization of ASA, first as the United States of America Standards Institute (USASI),then as the American National Standar

20、ds Institute (ANSI), with the Sectional Committee beingredesignated as an American National Standards Committee, another revision increasing the sizerange to NPS 48 and revising the text for clarity was approved and published as ANSI B16.9-1971.In 1975, Subcommittee F began a major revision to bring

21、 the standard up to date with currentpractice and usage. Common fractions were expressed as decimals (but without intending higherprecision) and metric dimensional equivalents were added. Provisions for step-wise change ofradius for NPS34long radius elbows and 180-deg returns were introduced. Follow

22、ing StandardsCommittee, cosecretariat, and ANSI approval, the revision was published as ANSI B16.9-1978.It was updated by a corrective addendum, B16.9a-1981, issued in February 1982.In 1982, American National Standards Committee B16 was reorganized as an ASME Committeeoperating under procedures accr

23、edited by ANSI. In ASME/ANSI B16.9-1986, the text was revisedand inch dimensions were established as the standard.In 1991, the Subcommittee reviewed the document and made a number of revisions that wereincluded in ASME B16.9-1993. Dimensions for short pattern lap joints were also added.In ASME B16.9

24、-2001, short radius elbows and returns were added, which included all dimen-sions and tolerances of ASME B16.28-1994. Metric units were provided as an independent butparallel alternative standard to U.S. Customary units, and a Quality System Program appendixwas added.In 2003, the Subcommittee review

25、ed the document and made a number of revisions. The scopeof the standard was changed to permit fabricated lap joint stub ends employing circumferentialor intersection welds.In 2006, the Subcommittee reviewed the document and made a number of additions andrevisions. Segmental elbow requirements were

26、added as were 3D elbow dimensions. Referencedocuments were updated.In 2012, the Subcommittee reviewed the document and made numerous revisions to the designproof test in section 9 and updated the references in Mandatory Appendix II.This Standard was approved as an American National Standard on Novem

27、ber 16, 2012.ivASME B16 COMMITTEEStandardization of Valves, Flanges, Fittings, and Gaskets(The following is the roster of the Committee at the time of approval of this Standard.)STANDARDS COMMITTEE OFFICERSW. B. Bedesem, ChairG. A. Jolly, Vice ChairC. E. OBrien, SecretarySTANDARDS COMMITTEE PERSONNE

28、LA. Appleton, Alloy Stainless Products Co., Inc.R. W. Barnes, Anric Enterprises, Inc.W. B. Bedesem, ConsultantR. M. Bojarczuk, ExxonMobil Research however, they shouldnot contain proprietary names or information.RequeststhatarenotinthisformatmayberewrittenintheappropriateformatbytheCommitteeprior to

29、 being answered, which may inadvertently change the intent of the original request.ASME procedures provide for reconsideration of any interpretation when or if additionalinformation that might affect an interpretation is available. Further, persons aggrieved by aninterpretation may appeal to the cog

30、nizant ASME Committee or Subcommittee. ASME does not“approve,” “certify,” “rate,” or “endorse” any item, construction, proprietary device, or activity.Attending Committee Meetings. The B16 Standards Committee regularly holds meetings thatare open to the public. Persons wishing to attend any meeting

31、should contact the Secretary ofthe B16 Standards Committee.viASME B16.9-2012SUMMARY OF CHANGESFollowing approval by the B16 Committee and ASME, and after public review, ASME B16.9-2012was approved by the American National Standards Institute on November 16, 2012.ASME B16.9-2012 consists of editorial

32、 changes, revisions, and corrections identified by a marginnote, (12), placed next to the affected area.Page Location Change3 9.1 First paragraph revised9.2.1 First sentence revised9.2.2 First paragraph revised4, 5 9.3 Revised9.4.3 Revised9.5 Added9.6 Added37 Mandatory Appendix II UpdatedviiINTENTIO

33、NALLY LEFT BLANKviiiASME B16.9-2012FACTORY-MADE WROUGHT BUTTWELDING FITTINGS1 SCOPE1.1 GeneralThis Standard covers overall dimensions, tolerances,ratings,testing,andmarkingsforfactory-madewroughtbuttwelding fittings in sizes NPS12through NPS 48(DN 15 through DN 1200).1.2 Special FittingsFittings may

34、 be made to special dimensions, sizes,shapes, and tolerances by agreement between the manu-facturer and the purchaser.1.3 Fabricated FittingsFabricated laterals and other fittings employing cir-cumferential or intersection welds are considered pipefabrication andare not withinthe scope ofthis Standa

35、rd.Fabricated lap joint stub ends are exempt from theabove restrictions, provided they meet all the require-ments of the applicable ASTM material specificationlisted in section 5.1.4 Relevant UnitsThis Standard states values in both SI (Metric) andU.S. Customary units. These systems of units are to

36、beregarded separately as standard. Within the text, theU.S. Customary units are shown in parentheses or inseparate tables that appear in Mandatory Appendix I.The values stated in each system are not exact equiva-lents; therefore, it is required that each system of unitsbe used independently of the o

37、ther. Combining valuesfrom the two systems constitutes nonconformance withthe Standard.The designation for size is NPS for both metric- andcustomary-dimensioned fittings. Fitting pressure ratingis associated with the connecting wall thickness of pipeof equivalent size and material.1.5 References1.5.

38、1 Referenced Standards. Standards and specifi-cations adopted by reference in this Standard are shownin Mandatory Appendix II. It is not considered practicalto identify the specific edition of each standard andspecification in the individual references. Instead, thespecific edition reference is iden

39、tified in MandatoryAppendix II. A product made in conformance with aprior edition of referenced standards and in all other1respects conforming to this Standard will be consideredto be in conformance.1.5.2 Codes and Regulations. A fitting used underthe jurisdiction of the ASME Boiler and Pressure Ves

40、selCode, the ASME Code for Pressure Piping, or a govern-mentalregulationissubjecttoanylimitationofthatcodeor regulation. This includes any maximum temperaturelimitation or rule governing the use of a material at lowtemperature.1.6 Service ConditionsCriteria for selection of fitting types and materia

41、lssuitable for particular fluid service are not within thescope of this Standard.1.7 WeldingInstallation welding requirements are outside thescope of this Standard.1.8 Quality SystemsNonmandatory requirements relating to the fittingmanufacturers Quality System Program are describedin Nonmandatory Ap

42、pendix A.1.9 ConventionFor determining conformance with this Standard, theconvention for fixing significant digits where limits(maximum and minimum values) are specified, shall beas defined in ASTM E29. This requires that an observedor calculated value be rounded off to the nearest unitin the last r

43、ight-hand digit used for expressing the limit.Decimal values and tolerances do not imply a particularmethod of measurement.1.10 Pressure Rating DesignationClass followed by a dimensionless number is thedesignationforpressuretemperatureratings.Standard-ized designationsfor flangesper ASMEB16.5 refere

44、ncedin this Standard are Classes 150, 300, 600, 900, 1500,and 2500.2 PRESSURE RATINGS2.1 Basis of RatingsThe allowable pressure ratings for fittingsdesignedinaccordance withthisStandardmay becalcu-lated as for straight seamless pipe of equivalent materialASME B16.9-2012(as shown by comparison of com

45、position and mechani-cal properties in the respective material specifications)inaccordancewiththerulesestablishedintheapplicablesections of ASME B31, Code for Pressure Piping. Forthe calculation, applicable data for the pipe size, wallthickness, and material that are equivalent to that ofthe fitting

46、 shall be used. Pipe size, wall thickness (orschedule number), and material identity on the fittingsare in lieu of pressure rating markings.2.2 Design of FittingsThe design of fittings shall be established by mathe-maticalanalyses(e.g.,ASMEB16.49forbends)containedin nationallyrecognized pressure ves

47、sel orpiping codes,orat themanufacturers optionby prooftestingin accor-dance with section 9 of this Standard. In order to meetdesign or manufacturing requirements, it is expectedthat some portion of formed fittings may have to bethicker than the pipe wall with which the fitting isintended to be used

48、. The mathematical analyses, if used,may take into account such thicker sections. Records ofmathematical analysis and/or successful proof test datashall be available at the manufacturers facility forinspection by the purchaser.3 SIZENPS, followed by a dimensionless number, is the des-ignation for no

49、minal fitting size. NPS is related to thereference nominal diameter, DN, used in internationalstandards. The relationship is, typically, as follows:DN NPS1512203425 132 11440 11250 265 21280 3100 4NOTE: For NPS 4, the equivalence is DN p 25 H11547 NPS.4 MARKING4.1 Standard MarkingEach fitting shall be permanently marked to show thefollowing:(a) manufacturers name or trademark(b) material identification, either the ASTM or ASMEgrade designation2(c) schedule number1or nominal wall thickness inmm(d) size the nominal pipe size (NPS) identificationnumber related to the en

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1