1、 The American Society of Mechanical Engineers AN AMERICAN NATIONAL STANDARD SPECIFICATIONS FOR HOLE SAWS, HOLE SAW ARBORS, AND HOLE SAW ACCESSORIES ASME BN4.54-1 NNN mevision of ASME 894.54-1 994) Date of Issuance: December 30, 1999 This Standard will be revised when the Society approves the issuanc
2、e of a new edition. There will be no addenda or written interpretations of the requirements of this Standard issued to this edition. ASME is the registered trademark of The American Society of Mechanical Engineers. This code or standard was developed under procedures accredited as meeting the criter
3、ia for American National Standards. The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code or standard was made available for public review and comment that pr
4、ovides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large. ASME does not “approve,“ “rate,“ or “endorse“ any item, construction, proprietary device, or activity. ASME does not take any position with respect to the validity of any patent r
5、ights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assumes any such liability. Users of a code or standard are expressly advised that determinati
6、on of the validity of any such patent rights, and the risk of the infringement of such rights, is entirely their own responsibility. Participation by federal agency representativefs) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code or
7、standard. ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals. No part of this document may be reproduced in any form, in an electronic retri
8、eval system or otherwise, without the prior written permission of the publisher. The American Society of Mechanical Engineers Three Park Avenue, New York, NY 10016-5990 Copyright 0 1999 by THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All Rights Reserved Printed in U.S.A. This Standard on Specificati
9、ons for Hole Saws, Hole Saw Arbors, and Hole Saw Accessories was originally prepared by the B94 Technical Committee 19 on Hack, Band, and Hole Saws. In 1997, the technical committees of the ASME B94 Standards Committee were reorganized and TC 19 became the Subcommittee on Saws and Knives. This Subco
10、mmittee prepared the current revision with the assistance of the Hack and Band Saw Manufacturers Association of America. This edition of B94.54 was approved by the American National Standards Institute on November 2, 1999. ASME STANDARDS COMMITTEE 694 Cutting Tools, Holders, Drivers, and Bushings (T
11、he following is the roster of the Committee at the time of approval of this Standard.) OFFICERS P. Bourg, Chair P. Esteban, Secretary COMMITTEE PERSONNEL P. Bourg, Tivoly, Inc. A. M. Bratkovich, The Association for Manufacturing Technology E. J. Czopor, E Note (3)l 14 14 Z . No. 3 Morse taper 3Vl6 ?
12、 2 holes equally spaced on 2 in. diameter I circle, concentric with 5/8 - 18 hole diameter 5/8 - 18 UNF 28 threads “/64 in. diameter; 4 holes equally spaced on 1 in. bolt circle, concentric with 5/8 - 18 hole FIG. 17 DRIVE PLATE FOR HOLE SAWS 3 in. THROUGH 4/* in. DIAMETER 10 SPECIFICATIONS FOR HOLE
13、 SAWS, HOLE SAW ARBORS, AND HOLE SAW ACCESSORIES 5/16 - 18 UNC -28 threads, drilled through and tapped; 3 holes equally spaced on 33/8 in. diameter bolt circle, concentric with 518 - 18 hole ASME 894.54-1999 318 in. 17/64 in. diameter, drill through; 4 holes equally spaced on 1 in. bolt circle, conc
14、entric with 518 - 18 hole FIG. 18 DRIVE PLATE FOR HOLE SAWS 45h in. THROUGH 6 in. DIAMETER f- 7/16 in. hex I 7/16 in. hex 7 GENERAL NOTE: This figure is for reference only. FIG. 19 EXTENSION 11 ASME B94.54-1999 SPECIFICATIONS FOR HOLE SAWS, HOLE SAW ARBORS, AND HOLE SAW ACCESSORIES 9 FIG. 20 MORSE TAPER ADAPTER 12
