1、ANSI/ASSE A10.11-2010ANSI/ASSEA10.11-2010ANSI/ASSE A10.11-2010Safety Requirements forPersonnel and Debris NetsAmerican National Standardfor Construction andDemolition OperationsAMERICAN SOCIETY OFSAFETY ENGINEERSAMERICAN NATIONAL STANDARDASSECopyright American Society of Safety Engineers Provided by
2、 IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:38:34 MDTNo reproduction or networking permitted without license from IHS-,-,-The information and materials contained in this publication have been develope
3、d from sources believed to be reliable. However, the American Society of Safety Engineers (ASSE) as secretariat of the ANSI accredited A10 Committee or individual committee members accept no legal responsibility for the correctness or completeness of this material or its application to specific fact
4、ual situations. By publication of this standard, ASSE or the A10 Committee does not ensure that adherence to these recommendations will protect the safety or health of any persons, or preserve property. Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licen
5、see=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:38:34 MDTNo reproduction or networking permitted without license from IHS-,-,-ANSI ANSI/ASSE A10.11 2010 American National Standard Construction and Demolition Operations Safety Requirements for
6、Personnel and Debris Nets Secretariat American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 Approved November 2, 2010 American National Standards Institute, Inc. Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licens
7、ee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:38:34 MDTNo reproduction or networking permitted without license from IHS-,-,-Approval of an American National Standard requires verification by ANSI that the requirements for due process, consens
8、us, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simpl
9、e majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he/
10、she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstance give an interpretation of any American Natio
11、nal Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretation should be addressed to the secretariat or sponsor whose name appears on the title page
12、 of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute requires that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards
13、 may receive current information on all standards by calling or writing the American National Standards Institute. Published November, 2010 by American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 (847) 699-2929 www.asse.org Copyright 2010 by American Society
14、of Safety Engineers All Rights Reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America American National Standard Copyright American Society of
15、Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:38:34 MDTNo reproduction or networking permitted without license from IHS-,-,-Foreword (This Foreword is not a part of American
16、National Standard A10.11-2010.) This standard is one of a series of safety standards that have been formulated by the Accredited Standards Committee on Safety in Construction and Demolition Operations, A10. It is expected that the standards in the A10 series will find a major application in industry
17、, serving as a guide to contractors, labor, and equipment manufacturers. For the convenience of users, a list of existing and proposed standards in the A10 series for Safety Requirements in Construction and Demolition Operations follows. A10.1 Pre-Planning for Construction Safety and Health (under d
18、evelopment) A10.2 Safety, Health, and Environmental Training (under development) A10.3 Powder-Actuated Fastening Systems A10.4 Personnel Hoists and Employee Elevators A10.5 Material Hoists A10.6 Demolition Operations A10.7 Transportation, Storage, Handling, and Use of Commercial Explosives and Blast
19、ing Agents A10.8 Scaffolding A10.9 Concrete and Masonry Construction A10.10 Temporary and Portable Space Heating Devices A10.11 Personnel and Debris Nets A10.12 Excavation A10.13 Steel Erection A10.15 Dredging A10.16 Tunnels, Shafts, and Caissons A10.17 Safe Operating Practices for Hot Mix Asphalt (
20、HMA) Construction A10.18 Temporary Roof and Floor Holes, Wall Openings, Stairways, and Other Unprotected Edges A10.19 Pile Installation and Extraction Operations A10.20 Ceramic Tile, Terrazzo, and Marble Work A10.21 Safe Construction and Demolition of Wind Generation/Turbine Facilities (under develo
21、pment) A10.22 Rope-Guided and Non-Guided Workers Hoists A10.23 Safety Requirements for the Installation of Drilled Shafts (under development) A10.24 Roofing Safety Requirements for Low-Sloped Roofs A10.25 Sanitation in Construction A10.26 Emergency Procedures for Construction Sites (under developmen
22、t) A10.27 Hot Mix Asphalt Facilities A10.28 Work Platforms Suspended from Cranes or Derricks A10.29 Aerial Platforms in Construction (under development) A10.31 Digger-Derricks A10.32 Personal Fall Protection Used in Construction and Demolition Operations A10.33 Safety and Health Program Requirements
23、 for Multi-Employer Projects A10.34 Public Protection A10.37 Debris Nets A10.38 Basic Elements of a Program to Provide a Safe and Healthful Work Environment A10.39 Construction Safety and Health Audit Program A10.40 Reduction of Musculoskeletal Problems in Construction A10.41 Equipment Operator and
24、Supervisor Qualifications and Responsibilities (under development) A10.42 Rigging Qualifications and Responsibilities in the Construction Industry A10.43 Confined Spaces in Construction (under development) Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Li
25、censee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:38:34 MDTNo reproduction or networking permitted without license from IHS-,-,-A10.44 Lockout/Tagout in Construction A10.46 Hearing Loss Prevention A10.47 Highway Construction Safety A10.48 Com
26、munication Tower Erection (under development) A10.49 Control of Health Hazards (under development) One purpose of these standards is to serve as guides to governmental authorities having jurisdiction over subjects within the scope of the A10 Committee standards. If these standards are adopted for go
27、vernmental use, the reference of other national codes or standards in individual volumes may be changed to refer to the corresponding regulations. Revisions: The A10 Committee welcomes proposals for revisions to this standard. Revisions are made to the standard periodically (usually five years from
28、the date of the standard) to incorporate changes that appear necessary or desirable, as demonstrated by experience gained from the application of the standard. Proposals should be as specific as possible, citing the relevant section number(s), the proposed wording, and the reason for the proposal. P
29、ertinent documentation would enable the A10 Committee to process the changes in a more timely manner. Interpretations: Upon a request in writing to the Secretariat, the A10 Committee will render an interpretation of any requirement of the standard. The request for interpretation should be clear, cit
30、ing the relevant section number(s) and phrased as a request for a clarification of a specific requirement. Oral interpretations are not provided. No one but the A10 Committee (through the A10 Secretariat) is authorized to provide any interpretation of this standard. Approval: Neither the A10 Committ
31、ee nor American National Standards Institute (ANSI) “approves,“ “certifies,“ “rates,“ or “endorses“ any item, construction, proprietary device, or activity. Appendices: Appendices are included in most standards to provide the user with additional information related to the subject of the standard. A
32、ppendices are not part of the approved standard. Committee Meetings: The A10 Committee meets twice a year. Persons wishing to attend a meeting should contact the Secretariat for information. Standard Approval: This standard was processed and approved for submittal to ANSI by the American National St
33、andards Committee on Safety in Construction and Demolition Operations, A10. Approval of the standard does not necessarily imply (nor is it required) that all Committee members voted for its approval. At the time this standard was approved, the A10 Committee had the following members: Copyright Ameri
34、can Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:38:34 MDTNo reproduction or networking permitted without license from IHS-,-,-Richard King, CSP, Chairman James T
35、omaseski, Vice Chairman Timothy R. Fisher, CSP, CHMM, ARM, CPEA, Secretary Jennie Dalesandro, Administrative Technical Support Organization Represented Name of Representative Accident Prevention Corporation Frank Burg, CSP Michael Serpe, CSP Aegis Corporation Matthew J. Burkart, P.E. Judith Burkart
36、Alstom Power Robert Renney Ted P. Sharp American Insurance Services Group Thad Nosal James G. Borchardt, CSP, CPE American Work Platform Training, Inc. Dennis W. Eckstine ASCE - Construction Institute Committee Harlan Fair, P.E. William R. Nash, P.E. American Society of Safety Engineers Ken Shorter,
37、 CSP, ARM A. David Brayton, CSP, CPC American Wind Energy Association Michele Myers Asbestos Workers International Union Terry Lynch Jim E. Lapping, MS, P.E., CSP Associated Builders and Contractors, Inc. Michael W. Hayslip, Esq., P.E., CSP Chris WilliamAssociated General Contractors of America, The
38、 Charlie Bird Kevin CannonAssociation of Union Constructors, The William Treharne, P.E. Jeffrey Hardison A-Z Safety Resources, Inc. Jane F. Williams, CPEA, CCA Barton-Malow Company Mark Klimbal, CSP, ARM Clayton Shafer Black if unsatis-factory, state reasons and describe corrections performed for ea
39、ch deficiency 5. Dates inspected 6. Test results; if unsatisfactory, state reasons 7. Date removed 8. Disposition and reason The competent person responsible for the nets shall initial each entry. 12. TRAINING When personnel nets are used, the employer shall provide appropriate training for the empl
40、oyees so that they will recognize the hazards of falling into nets, and shall instruct them in the procedures to be followed in order to limit potential injury. The training program shall include: 1. The test limits of installed nets 2. Avoiding falls 3. Recording and reporting of training 4. Locati
41、on of inspection rec-ords and the person responsible 5. Refer to ANSI/ASSE Z490.1, Accepted Practices for Safety, Health, and Environmental Train-ing, for more information on SH move, de-energize or erect barrier to prevent contact) (c) Location of sanitary facilities and drinking water (4) Scheduli
42、ng work for safety (a) Providing for items such as hard hats, life belts, goggles and work vests on the job (b) Establishing liaison among contractors to prevent congestion among trades (c) Providing temporary flooring, safety nets and scaffolding where required Copyright American Society of Safety
43、Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:38:34 MDTNo reproduction or networking permitted without license from IHS-,-,-AMERICAN NATIONAL STANDARD A10.11 2010 18 (5) Work proced
44、ures (a) Space (b) Equipment such as cranes, hoists, elevators and trucks (c) Rigging procedures (6) Tools and equipment (a) Repair, maintenance and care (b) Inspection (c) Supplies of tools for each job (7) Workers and foremen (a) Job assignment (b) Training and supervision (c) Number of workers (d
45、) Plans for maintaining interest in safety: (i) Safety bulletins, record charts and posters (ii) Recognition for groups or individuals (iii) Investigation and reporting on reportable accidents (iv) Knowledge of safety orders (v) Safety meetings (vi) Specific safety instructions for new employees (e)
46、 Establishment of provisions to take immediate action to correct unsafe conditions or acts (f) First aid and medical treatment of injuries (8) Safety meetings (a) Establishment of provisions to take immediate action to correct unsafe conditions or acts (b) First aid and medical treatment of injuries
47、 Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:38:34 MDTNo reproduction or networking permitted without license from IHS-,-,-Page Intentionally
48、Left Blank.Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:38:34 MDTNo reproduction or networking permitted without license from IHS-,-,-END USER LICENSE AGREEMENT IMPORTANT - READ CAREFULLY BEFORE DOWNLOADING OR COPYING TO YOUR COMPUTER ANYFILE(S) CONTAINED HEREWITH. THE STANDARD(S) AND OTHER INFORMATION PROVIDED HEREWITH ARE COPYRIGHTED.
