1、Designation: E1694 95a (Reapproved 2012) An American National StandardStandard Classification forServiceability of an Office Facility for Special Facilities andTechnologies1,2This standard is issued under the fixed designation E1694; the number immediately following the designation indicates the yea
2、r oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This classification covers pairs of scales for classify
3、ingan aspect of the serviceability of an office facility, that is, thecapability of an office facility to meet certain possible require-ments for special facilities and technologies.1.2 Each pair of scales shown in Figs. 1-6 printed side-by-side on a page, are for classifying one topic of serviceabi
4、litywithin that aspect of serviceability. Each paragraph in anOccupant Requirement Scale (see Figs. 1-6) summarizes onelevel of serviceability on that topic that occupants mightrequire. The matching entry in the Facility Rating Scale (SeeFigs. 1-6) is a translation of the requirement into a descript
5、ionof certain features of a facility that, taken in combination,indicate that the facility is likely to meet that level of requiredserviceability.1.3 The entries in the Facility Rating Scale (See Figs. 1-6)are indicative and not comprehensive. They are for quickscanning, to estimate approximately, q
6、uickly, andeconomically, how well an office facility is likely to meet theneeds of one or another type of occupant group over time. Theentries are not for measuring, knowing, and evaluating how anoffice facility is performing.1.4 This classification can be used to estimate the level ofserviceability
7、 of an existing facility. It can also be used toestimate the serviceability of a facility that has been plannedbut not yet built, such as one for which single-line drawingsand outline specifications have been prepared.1.5 This classification indicates what would cause a facilityto be rated at a cert
8、ain level of serviceability, but it does notstate how to conduct a serviceability rating nor how to assigna serviceability score. That information is found in PracticeE1334. The scales in this classification are complementary toand compatible with Practice E1334. Each requires the other.2. Reference
9、d Documents2.1 ASTM Standards:3E631 Terminology of Building ConstructionsE1334 Practice for Rating the Serviceability of a Building orBuilding-Related Facility (Withdrawn 2013)4E1679 Practice for Setting the Requirements for the Service-ability of a Building or Building-Related Facility, and forDete
10、rmining What Serviceability is Provided or Proposed2.2 ISO Documents:5ISO 6240 International Standard, Performance Standards inBuildingContents and PresentationISO/DIS 7162 Draft International Standard, PerformanceStandards in BuildingContents and Format of Standardsfor Evaluation of PerformanceISO/
11、DIS 7164 Draft International Standard, PerformanceStandards in BuildingDefinitions and Means of Expres-sion for the Performance of a Whole Building3. Terminology3.1 Definitions:3.1.1 For standard definitions of terms applicable to thisclassification, see Terminology E631.3.1.2 facility, na physical
12、setting used to serve a specificpurpose. E6313.1.2.1 DiscussionA facility may be within a building, ora whole building, or a building with its sites and surroundingenvironment; or it may be a construction that is not a building.The term encompasses both the physical object and its use.3.1.3 facility
13、 serviceabilitythe capability of a facility toperform the function(s) for which it is designed, used, orrequired to be used. E6311This classification is under the jurisdiction of ASTM Committee E06 onPerformance of Buildings and is the direct responsibility of Subcommittee E06.25on Whole Buildings a
14、nd Facilities.Current edition approved April 1, 2012. Published May 2012. Originallyapproved in 1995. Last previous edition approved in 2005 as E1694 95a (2005).DOI: 10.1520/E1694-95AR12.2Portions of this document are based on material originally prepared by theInternational Centre for Facilities (I
15、CF) and 1993 by ICF and Minister of PublicWorks and Government Services Canada. Their cooperation in the development ofthis standard is acknowledged.3For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStanda
16、rds volume information, refer to the standards Document Summary page onthe ASTM website.4The last approved version of this historical standard is referenced onwww.astm.org.5Available from American National Standards Institute (ANSI), 25 W. 43rd St.,4th Floor, New York, NY 10036, http:/www.ansi.org.C
17、opyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1FIG. 1 Scale A.13.1 for Group or Shared Conference CenterE1694 95a (2012)23.1.3.1 DiscussionThe scope of this performance is of thefacility as a system, including its subsystems, componen
18、ts, andmaterials and their interactions, such as acoustical,hydrothermal, air purity, and economic; and of the relativeimportance of each performance requirement.FIG. 2 Scale A.13.2 for Video Teleconference FacilitiesE1694 95a (2012)3FIG. 3 Scale A.13.3 for Simultaneous TranslationE1694 95a (2012)43
19、.1.4 offcea place, such as a room, suite, or building, inwhich business, clerical, or professional activities are con-ducted. E6314. Significance and Use4.1 Each Facility Rating Scale in this classification providesa means for estimating the level of serviceability of a buildingor facility for one t
20、opic of serviceability, and for comparingthat level against the level of any other building or facility.4.2 This classification can be used for comparing how welldifferent buildings or facilities meet a particular requirementfor serviceability. It is applicable despite differences such aslocation, s
21、tructure, mechanical systems, age, and buildingshape.4.3 This classification can be used to estimate the amount ofvariance of serviceability from target or from requirement, fora single office facility, or within a group of office facilities.FIG. 4 Scale A.13.4 for Satellite and Microwave LinksE1694
22、 95a (2012)54.4 This classification can be used to estimate the following:(1) serviceability of an existing facility for uses other than itspresent use; (2) the serviceability (potential) of a facility thathas been planned but not yet built; and (3) the serviceability(potential) of a facility for wh
23、ich a remodelling has beenplanned.FIG. 5 Scale A.13.5 for Mainframe Computer CenterE1694 95a (2012)64.5 The use of this classification does not result in buildingevaluation or diagnosis. Building evaluation or diagnosisgenerally requires special expertise in building engineering ortechnology and the
24、 use of instruments, tools, or measurements.FIG. 6 Scale A.13.6 for Telecommunications CenterE1694 95a (2012)74.6 This classification applies only to facilities that arebuilding constructions or parts thereof. (While this classifica-tion may be useful in rating the serviceability of facilities thata
25、re not building constructions, such facilities are outside thescope of this classification.)4.7 This classification is not intended for, and is not suitablefor, use for regulatory purposes, nor for fire hazard assessmentnor for fire risk assessment.5. Basis of Classification5.1 The scales shown in F
26、igs. 1-6 contain the basis forclassification.5.2 Instructions for the use of this classification are con-tained in Practices E1334 and E1679.6. Keywords6.1 building; computer center; mainframe; conference cen-ter; facility; facility occupants; function; microwave commu-nication; office; performance;
27、 rating; rating scale; require-ments; serviceability; simultaneous translation;telecommunications center; use; video teleconferenceASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard
28、are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif no
29、t revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which
30、you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,Unit
31、ed States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ 95a (2012)8
