ANSI ATIS 0100504-1998 Network Performance Parameters for Packet Switched Data Communication Services.pdf

上传人:赵齐羽 文档编号:433366 上传时间:2018-11-11 格式:PDF 页数:100 大小:1.56MB
下载 相关 举报
ANSI ATIS 0100504-1998 Network Performance Parameters for Packet Switched Data Communication Services.pdf_第1页
第1页 / 共100页
ANSI ATIS 0100504-1998 Network Performance Parameters for Packet Switched Data Communication Services.pdf_第2页
第2页 / 共100页
ANSI ATIS 0100504-1998 Network Performance Parameters for Packet Switched Data Communication Services.pdf_第3页
第3页 / 共100页
ANSI ATIS 0100504-1998 Network Performance Parameters for Packet Switched Data Communication Services.pdf_第4页
第4页 / 共100页
ANSI ATIS 0100504-1998 Network Performance Parameters for Packet Switched Data Communication Services.pdf_第5页
第5页 / 共100页
点击查看更多>>
资源描述

1、 AMERICAN NATIONAL STANDARD FOR TELECOMMUNICATIONS ATIS-0100504.1998(R2011) Packet-Switched Data Communication Service Performance Parameters, Measurements Methods, and Objectives ATIS is the leading technical planning and standards development organization committed to the rapid development of glob

2、al, market-driven standards for the information, entertainment and communications industry. More than 250 companies actively formulate standards in ATIS 18 Committees, covering issues including: IPTV, Service Oriented Networks, Energy Efficiency, IP-Based and Wireless Technologies, Quality of Servic

3、e, and Billing and Operational Support. In addition, numerous Incubators, Focus and Exploratory Groups address emerging industry priorities including “Green”, IP Downloadable Security, Next Generation Carrier Interconnect, IPv6 and Convergence. ATIS is the North American Organizational Partner for t

4、he 3rd Generation Partnership Project (3GPP), a member and major U.S. contributor to the International Telecommunication Union (ITU) Radio and Telecommunications Sectors, and a member of the Inter-American Telecommunication Commission (CITEL). For more information, please visit . AMERICAN NATIONAL S

5、TANDARD Approval of an American National Standard requires review by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agre

6、ement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made towards their resolution. The use of

7、American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National St

8、andards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institu

9、te. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that

10、action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Notice of Disclaimer theirexistence does not in any respect preclud

11、e anyone, whether he has approvedthe standards or not, from manufacturing, marketing, purchasing, or usingproducts, processes, or procedures not conforming to the standards.The American National Standards Institute does not develop standards andwill in no circumstances give interpretation on any Ame

12、rican NationalStandard. Moreover, no person shall have the right or authority to issue aninterpretation of an American National Standard in the name of the AmericanNational Standards Institute. Requests for interpretations should beaddressed to the secretariat or sponsor whose name appears on the ti

13、tlepage of this standard.CAUTION NOTICE:This American National Standard may be revised orwithdrawn at any time. The procedures of the American National StandardsInstitute require that action be taken periodically to reaffirm, revise, orwithdraw this standard. Purchasers of American National Standard

14、s mayreceive current information on all standards by calling or writing the AmericanNational Standards Institute.American National StandardPublished byAmerican National Standards Institute, Inc.11 West 42nd Street, New York, NY 10036Copyright 1998 by Alliance for Telecommunications Industry Solution

15、sAll rights reserved.No part of this publication may be reproduced in anyform, in an electronic retrieval system or otherwise,without prior written permission of the publisher.Printed in the United States of AmericaiContentsPageForeword iv1Introduction. 1 2Normative references . 3 3Performance model

16、 3 4Speed of service parameters 11 5Accuracy and dependability parameters 17 6Availability. 25 7Requirements and example procedures for performance measurement 298Performance specifications 60Tables1X.25 packet layer reference events and resulting interface states. 82X.75 packet layer reference even

17、ts and resulting interface states. 93Packet layer reference events (PEs) used in measuring call set-up delay. 134Packet layer reference events (PEs) used in measuring data packet transfer delay and throughput. 145Packet layer reference events (PEs) used in measuring clear indication delay. 176Packet

18、 layer reference events (PEs) used in measuring residual error ratio. 217Pairs of PEs resulting from reset events 228Pairs of PEs resulting from premature disconnect events 249Packet layer reference events (PEs) used in measuring call clear failure probability . 2510Outage criteria for the availabil

19、ity decision parameters 2711Summary of measurement architectures 3512Calculation of statistics for performance parameters . 5713Factors that may influence the performance parameter values . 5914Call set-up delay: Worst-case design objectives. 6515Values of X for table 14 6516Data packet transfer del

20、ay: Worst-case design objectives 6617Values of Y for table 16 6618Throughput capacity: Worst-case design objectives . 6719Clear indication delay: Worst-case design objectives . 6820Values of Zfor table 19 68iiPage21Call set-up error probability: Worst-case design objectives 6922Call set-up failure p

21、robability: Worst-case design objectives 6923Residual error ratio: Worst-case design objectives . 6924Reset stimulus probability: Worst-case design objectives. 7025Reset probability: Worst-case design objectives. 7026Premature disconnect stimulus probability: Worst-case design objectives . 7027Prema

22、ture disconnect probability: Worst-case design objectives . 7128Call clear failure probability: Worst-case design objectives 7129Service availability: Worst-case design objectives 7230Mean time between service outages (MTBSO): Worst-case design objectives . 72Figures1Packet-switched service performa

23、nce description . 22Sections of a national virtual connection 43Example packet layer reference events . 44Diagram of DTE/DCE flow control states . 105Diagram of STE-X/STE-Y flow control states. 116Call set-up delay events . 127Packet layer reference events occurring during successful call set-up 188

24、Components of residual error ratio. 199Reset stimulus and reset probabilities 2310Determination of availability states. 2711Basic availability model and parameters 2812Measurement architectures 3213Loopback architectures 3414Example access trial data extraction procedure. 3815Example access trial da

25、ta reduction procedure . 3916Classifying an access trial outcome . 4017CSD calculation 4018Example data transfer trial extraction procedure 4119Example data transfer trial data reduction procedure 4320RP, RSP, PDP, and PDSP calculations (approximate method). 4421Residual error ratio calculation (app

26、roximate method). 4522DPTD and TC calculation. 45iiiPage23Example disengagement trial data extraction procedure 4624Example disengagement trial data reduction procedure 4725Classifying a disengegement trial outcome 4826CID calculation 4827Minimal availability trial data extraction procedure . 4928Mi

27、nimal availability trial data reduction procedure 5129Data reduction procedure for estimating mean time between serviceoutages . 5330National packet-switched service performance allocation model . 6231Definition of reference events at the NI and INI boundaries . 63AnnexesAStastistical formulas 73BMe

28、thods for estimating performance of concatenated access and transit virtual connection portions . 74CSampling estimation of availability parameters. 77DBibliography 85EAcronyms 86ivForeword(This foreword is not part of American National Standard T1.504-1998.)This standard defines a set of performanc

29、e parameters for packet-switched datacommunication services. The parameters may be used to specify or measure theperformance of any virtual connection (or section of a virtual connection) delimited bythe interfaces described in two ITU-T Recommendations: X.25 (Interface betweendata terminal equipmen

30、t (DTE) and data circuit-terminating equipment (DCE) for ter-minals operating in the packet mode and connected to public data Networks by dedi-cated circuit),and X.75 (Packet-switched signalling systems between publicnetworks providing data transmission services).The parameters address both virtualc

31、all and permanent virtual circuit services. They describe performance relative tothree primary data communication functions: access, user information transfer, anddisengagement. Each function is considered with respect to three general perfor-mance criteria: speed, accuracy, and dependability. The d

32、efined parameters are oftwo types: primary parameters and availability parameters. The primary parametersprovide a relatively detailed description of performance that encompasses each ofthe three functions and criteria. The availability parameters are derived from obser-vations of the primary parame

33、ter values and provide a more macroscopic, longer-term view of performance. The parameters are defined on the basis of standard in-terface events to facilitate their measurement with stand-alone test equipment.This standard evolved from, and is complementary to, a number of other national andinterna

34、tional standards. In American National Standard for Information systems -Data communications systems and services - User-oriented performance parame-ters, ANSI X3.102-1992, parameters are defined that may be used to describe theperformance of data communication services from the point of view of the

35、 end user ina protocol-independent manner. Many of the parameters defined in this T1 standardare protocol-specific counterparts to the parameters in ANSI X3.102. In AmericanNational Standard for Information systems - Data communication systems and ser-vices - Measurement methods for user-oriented pe

36、rformance evaluation,ANSIX3.141-1987 (R1992), measurement methods for the parameters described in ANSIX3.102 are defined. In General quality of service parameters for communications viaPublic Data Networks, ITU-T Recommendation X.140, protocol-independent quality-of-service parameters are defined th

37、at are similar to those defined in ANSI X3.102.Finally, packet switched service performance parameters, apportionment boundariesand worst-case performance values for international packet switched services aredefined in ITU-T Recommendations X.134, X.135, X.136, and X.137.This standard contains five

38、annexes. Annexes A through E are informative and arenot considered part of the standard.Suggestions for improvement of this standard are welcome. They should be sent tothe Alliance for Telecommunications Industry Solutions, 1200 G Street, NW, Suite500, Washington, DC 20005This standard was processed

39、 and approved for submittal to ANSI by AccreditedStandards Committee on Telecommunications, T1. Committee approval of this stan-dard does not necessarily imply that all committee members voted for its approval.At the time it approved this standard, Committee T1 had the following members:G. H. Peters

40、on, ChairmanE. R. Hapeman, Vice-ChairmanA. Lai, SecretaryB. Lerich, Senior EditorG. Couch, Technical EditorvOrganization Represented Name of RepresentativeEXCHANGE CARRIERSAmeritech L. Richard WoodLarry A. Young (Alt.)AT&T Wireless Services, Inc. . David HolmesBell Atlantic . John W. SeazholtzRoger

41、Nucho (Alt.)Bellcore . James C. StaatsCliff Halevi (Alt.)Bellsouth Telecommunications Inc. Malcolm Threlkeld, Jr.John Spencer (Alt.)GTE Telephone Operations Bernard J. HarrisRichard L. Cochran (Alt.)NYNEX James F. BaskinMichael Brusca (Alt.)Pacific Bell Ken KoupalSBC Communications, Inc. . C.C. Bail

42、eyRobert J. Hall (Alt.)Sprint - Local Telecommunications Division . Leroy D. KelloggU S West. James L. EitelDarryl Debault (Alt.)US Telephone Association-USTA. Dennis ByrnePaul Hart (Alt.)INTEREXCHANGE CARRIERSAT&T. Charles A. DvorakJeffrey George (Alt.)AT&T Canada Long Distance Svcs David H. WhyteG

43、eorge Tadros (Alt.)Comsat Corporation Mark T. NeibertPrakash Chitre (Alt.)General Communication, Inc. . Derek L. WeltonC.R. Baugh (Alt.)MCI Telecommunications Corporation Laszlo I. SzerenyiJ. Martin Carroll (Alt.)Sprint - Long Distance Div. . Thomas G. CrodaJames Lord (Alt.)Stentor Resource Centre I

44、nc. . B. SambasivanAl M. Yam (Alt.)Worldcom Robert BentleyKen Hosang (Alt.)MANUFACTURERSADC Telecommunications Inc. Don BerrymanCliff Davidow (Alt.)Alcatel Network Systems (ANS) . Jack BoychukDale Krisher (Alt.)AMP Inc. George LawrenceBen Bennett (Alt.)Apple Computer Inc. Wanda CoxDavid Michael (Alt

45、.)Ascom Enterprise Networks L.H. EberlZ. Putnins (Alt.)DSC Communications Corporation. Pete WaalAllen Adams (Alt.)ECI Telecom Inc. . Ron MurphyDanny Etz-Hadar (Alt.)Ericsson Inc. Linda TroyAl Way (Alt.)Fujitsu America Inc. Kenneth T. CoitHirohiko Yamamoto (Alt.)General Datacomm Inc. . Frederick Luca

46、sHarris Corporation. Yogi MistryHekimian Laboratories William H. DuncanHewlett-Packard Karen HigginbottomRichard Van Gelder (Alt.)Hughes Network Systems, Inc Dr Leonard GoldingEnrique Laborde (Alt.)viOrganization Represented Name of RepresentativeIBM Corporation William C. BergmanRao J. Cherukuri (A

47、lt.)Lucent Technologies .John H. BobsinDave R. Andersen (Alt.)Motorola Inc.Ken SkurnakDan Grossman (Alt.)NEC America, Inc. Donovan NakTakayuki Yoshida (Alt.)Nokia Telecommunications Inc. Chris WallaceTeuvo Jarvela (Alt.)Northern Telecom Inc. Mel N. WoinskyJohn Pugh (Alt.)Oki America Inc. .Henri Suyd

48、erhoudHisao Fujikawa (Alt.)Omnipoint Corporation Gary K. JonesParadyne Corporation .Marlis HumphreyRichard K. Smith (Alt.)Picturetel CorporationMarshall SchachtmanDavid Lindbergh (Alt.)Pirelli Tsg.John McdonoughT.C. Nie (Alt.)Qualcomm, Inc. Mark EpsteinEd Tiedemann (Alt.)Reltec Corporation Mark Scot

49、tLeroy Baker (Alt.)Rockwell International .Quentin C. CassenCarl J. Stehman (Alt.)Siemens Stromberg-Carlson .David E. FranciscoDennis Edinger (Alt.)Telecom Solutions.M.J. NarasimhaDon Chislow (Alt.)Telecommunications TechniquesBernard E. WorneJohn Paul Williams (Alt.)Tellabs Operations, Inc. R. Michael Schafer, Ph.D.Michael J. Birck (Alt.)Transwitch Corporation .Daniel C. UppPraveen Goli (Alt.)U.S. Robotics Richard L. StuartDale Walsh (Alt.)GENERAL INTERESTABC Inc. Warner W. JohnstonAerial Communications .George P. LynchBellSouth Personal Communications Inc. .Don ZelmerGretel Hoffman (Al

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1