1、 AMERICAN NATIONAL STANDARD FOR TELECOMMUNICATIONS ATIS-0300212.2015 Enhanced Telecommunications Charge Card Physical Characteristics and Numbering Structure As a leading technology and solutions development organization, the Alliance for Telecommunications Industry Solutions (ATIS) brings together
2、the top global ICT companies to advance the industrys most pressing business priorities. ATIS nearly 200 member companies are currently working to address the All-IP transition, network functions virtualization, big data analytics, cloud services, device solutions, emergency services, M2M, cyber sec
3、urity, network evolution, quality of service, billing support, operations, and much more. These priorities follow a fast-track development lifecycle from design and innovation through standards, specifications, requirements, business use cases, software toolkits, open source solutions, and interoper
4、ability testing. ATIS is accredited by the American National Standards Institute (ANSI). The organization is the North American Organizational Partner for the 3rd Generation Partnership Project (3GPP), a founding Partner of the oneM2M global initiative, a member of and major U.S. contributor to the
5、International Telecommunication Union (ITU), as well as a member of the Inter-American Telecommunication Commission (CITEL). For more information, visit www.atis.org. AMERICAN NATIONAL STANDARD Approval of an American National Standard requires review by ANSI that the requirements for due process, c
6、onsensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a
7、 simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made towards their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whet
8、her he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American N
9、ational Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title
10、 page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Stand
11、ards may receive current information on all standards by calling or writing the American National Standards Institute. Notice of Disclaimer & Limitation of Liability The information provided in this document is directed solely to professionals who have the appropriate degree of experience to underst
12、and and interpret its contents in accordance with generally accepted engineering or other professional standards and applicable regulations. No recommendation as to products or vendors is made or should be implied. NO REPRESENTATION OR WARRANTY IS MADE THAT THE INFORMATION IS TECHNICALLY ACCURATE OR
13、 SUFFICIENT OR CONFORMS TO ANY STATUTE, GOVERNMENTAL RULE OR REGULATION, AND FURTHER, NO REPRESENTATION OR WARRANTY IS MADE OFMERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. ATIS SHALL NOT BE LIABLE, BEYOND THE AMOUNT OF ANY SUM RECEIVED
14、 IN PAYMENT BY ATIS FOR THIS DOCUMENT, AND IN NO EVENT SHALL ATIS BE LIABLE FOR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. ATIS EXPRESSLY ADVISES THAT ANY AND ALL USE OF OR RELIANCE UPON THE INFORMATION PROVIDED IN THIS DOCUMENT IS AT THE RISK OF THE USER. NOTE - The users attention
15、is called to the possibility that compliance with this standard may require use of an invention covered by patent rights. By publication of this standard, no position is taken with respect to whether use of an invention covered by patent rights will be required, and if any such use is required no po
16、sition is taken regarding the validity of this claim or any patent rights in connection therewith. Please refer to http:/www.atis.org/legal/patentinfo.asp to determine if any statement has been filed by a patent holder indicating a willingness to grant a license either without compensation or on rea
17、sonable and non-discriminatory terms and conditions to applicants desiring to obtain a license. ATIS-0300212.2015, Enhanced Telecommunications Charge Card Physical Characteristics and Numbering Structure Is an American National Standard developed by the ATIS Telecom Management and Operations Committ
18、ee (TMOC). Published by Alliance for Telecommunications Industry Solutions 1200 G Street, NW, Suite 500 Washington, DC 20005 Copyright 2015 by Alliance for Telecommunications Industry Solutions All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval
19、 system or otherwise, without the prior written permission of the publisher. For information contact ATIS at 202.628.6380. ATIS is online at . ATIS-0300212.2015 Revision of ATIS-0300212.2010 American National Standard for Telecommunications Enhanced Telecommunications Charge Card Physical Characteri
20、stics and Numbering Structure Alliance for Telecommunications Industry Solutions Approved October 21, 2015 American National Standards Institute, Inc. Abstract: This standard applies to enhanced telecommunication charge cards issued within North America. The determination of eligibility to issue tel
21、ecommunication charge cards is beyond the scope of this standard. ATIS-0300212.2015 ii Foreword The information contained in this Foreword is not part of this American National Standard (ANS) and has not been processed in accordance with ANSIs requirements for an ANS. As such, this Foreword may cont
22、ain material that has not been subjected to public review or a consensus process. In addition, it does not contain requirements necessary for conformance to the Standard. The Alliance for Telecommunication Industry Solutions (ATIS) serves the public through improved understanding between providers,
23、customers, and manufacturers. The Telecom Management and Operations Committee (TMOC) develops operations, administration, maintenance, and provisioning standards, and other documentation related to Operations Support System (OSS) and Network Element (NE) functions and interfaces for communications n
24、etworks with an emphasis on standards development related to U.S.A. communication networks in coordination with the development of international standards. ANSI guidelines specify two categories of requirements: mandatory and recommendation. The mandatory requirements are designated by the word SHAL
25、L and recommendations by the word SHOULD. Where both a mandatory requirement and a recommendation are specified for the same criterion, the recommendation represents a goal currently identifiable as having distinct compatibility or performance advantages. Suggestions for improvement of this document
26、 are welcome. They should be sent to the Alliance for Telecommunications Industry Solutions, TMOC 1200 G Street NW, Suite 500, Washington, DC 20005. At the time it approved this document, TMOC, which is responsible for the development of this Standard, had the following leadership: T. Barrett, TMOC
27、Chair (AT&T) S. Kiewel, TMOC Vice-Chair (iconectiv) B. Yanders, Technical Editor (Centurylink) M. Usry, Technical Editor (iconectiv) ATIS-0300212.2015 iii Table of Contents 1 Scope, Purpose, & Application 1 1.1 Scope . 1 1.2 Purpose . 1 1.3 Application . 1 2 Normative references 1 3 Account Number S
28、tructure 2 3.1 Issuer Identification Number 3 3.1.1 Major Industry Identifier . 3 3.1.2 Country Code . 3 3.1.3 Issuer Identifier Number . 3 3.2 Individual Account Identification 3 3.3 Check Digit 3 4 Personal Identification number 3 5 Physical Specifications 4 5.1 Size & General Format 4 5.2 Embosse
29、d Information . 4 5.2.1 Embossing Specifications 4 5.2.2 Information to be Embossed 4 5.3 The Magnetic Stripe . 4 5.3.1 Encoding Specifications . 4 5.3.2 Information to be Encoded . 4 5.3.3 PIN Encoding . 4 Table of Figures Figure 3.1 Account number structure (ITU-T E.118) . 2 AMERICAN NATIONAL STAN
30、DARD ATIS-0300212.2015 American National Standard for Telecommunications Enhanced Telecommunications Charge Card Physical Characteristics and Numbering Structure 1 1 Scope, Purpose, & Application 1.1 Scope This standard applies to enhanced telecommunication charge cards issued within North America.
31、The determination of eligibility to issue telecommunication charge cards is beyond the scope of this standard. 1.2 Purpose This standard defines the major characteristics of enhanced telecommunication charge cards usable for international, domestic, inter-industry, and intra-industry applications in
32、 an interchange environment. These cards comply with existing American National Standards Institute (ANSI), International Organization for Standardization (ISO) and International Telecommunication Union, Telecommunication Standardization Sector (ITU-T). 1.3 Application The application of a telecommu
33、nication charge card is primarily for, but not limited to, payment for telecommunications services. Depending on the equipment involved, the card holder can present the card information to the service provider verbally, manually, or via a card reader. The use of these cards also involves appropriate
34、 agreements1between card issuers and service providers on matters such as, but not limited to, account number format, validation, billing, and settlement procedures. These agreements are beyond the scope of this standard. 2 Normative references The following standards contain provisions which, throu
35、gh reference in this text, constitute provisions of this American National Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this American National Standard are encouraged to investigate the possibility
36、of applying the most recent editions of the standards indicated below. ATIS-0300230.2015, Telecommunications Charge Card and Billed Number Screening Validation Message Components2INCITS/ISO/IEC 7810-2003, Identification cards Physical characteristics3ISO/IEC 7811-1:2014, Identification cards Recordi
37、ng technique Part 1: Embossing31Agreements between card issuers and service providers could permit the acceptance of charge card alternatives other than this standard including, but not limited to, cards using the traditional 14-digit format, abbreviated versions of this standard, and financial tran
38、sactions cards. 2This document is available from the Alliance for Telecommunications Industry Solutions (ATIS), 1200 G Street N.W., Suite 500, Washington, DC 20005: . 3This document is available from the International Organization for Standardization: . IIeIIpITaITIT3TtAt4SO/IEC 7811NCITS/ISO/IEmbos
39、sed chaSO/IEC 7812SO/IEC 7812rocedures 3SO/IEC 7813his standardpproved by IU-T RecomU-T RecomAccohe full numbhe equivalenccount Numhree parts: TThis documen-2:2014, IdenC 7811-3-1racters on ID-1:2006, Iden-2:2007, Ide:2006, Informshall be useTU-T the revimendation E.mendation E.unt Numer that identt
40、 of the termber of a teleche Issuer Idet is available frtification card995 (R2002-1 cards3tification cardntification cation technod in conjunctsion shall ap118 (05/2006164 (11/2010ber Strifies the telec“identificatioommunicationtification NuFigure 3.1om the InternaATIS-0ds Recordin), Identificatids
41、Identificaards Idenlogy , Identiion with the ply. ), The intern), The internuctureommunication number” in charge camber, the Ind Account ntional Telecom300212.202 g technique on cards tion of issuetification of fication cardsfollowing. Whational telecoational publicn charge carn ISO/IEC srd is 19 di
42、gitividual Accoumber strucmunications U15 Part 2: MaRecording trs - Part 1: Nissuers - Pa Financial ten these stammunicationtelecommund is called thstandards. Ths (see figureunt Identificature (ITU-T nion: . vity3cation of gistration a revision er and is Primary posed of ATIS-0300212.2015 3 3.1 Issu
43、er Identification Number The issuer identification number for telecommunication charge cards is composed of three parts: the Major Industry Identifier, the Country Code, and the Issuer identifier number. 3.1.1 Major Industry Identifier The Major Industry Identifier (MII) describes the industry withi
44、n which the card issuer is primarily engaged. The MII for the telecommunications industry consists of the digits 89 as defined by ITU-T Recommendation E.118. These digits are the first two (high order) digits of the Primary Account Number. 3.1.2 Country Code The Country Code immediately follows the
45、MII and consists of the ITU-T Country Code as defined in annex A of ITU-T Recommendation E.164. For telecommunication charge cards issued by service providers from countries in World Numbering Zone 1, this part consists of the single digit “1”. 3.1.3 Issuer Identifier Number The issuer identifier nu
46、mber is a 3-digit number that follows the Country Code (or World Zone) designator. NOTE: The procedure for assigning and administering North American Telecommunications Issuer Identifiers is the responsibility of a World Zone 1 committee. For information regarding the assignment of Issuer Identifier
47、s in the United States, contact the Chair, ITU-T U.S. Study Group A Subcommittee for Issuer Identifier Assignment and in Canada contact the Chairman, Canadian Subcommittee for World Zone 1 Issuer Identification. 3.2 Individual Account Identification The individual account identification is assigned
48、by the card-issuing organization. It immediately follows the issuer identification number. The length of the individual account identification can vary from 1 to 12 digits but is fixed for each unique issuer identification number. 3.3 Check Digit The check digit is a single digit immediately followi
49、ng the Individual Account Identification. It is calculated on all the preceding digits of the Primary Account Number according to the Luhn formula as defined by ISO/IEC 7812. 4 Personal Identification number The Personal Identification Number (PIN) is a confidential code that is used to validate transactions. The use of a PIN within World Numbering Zone 1 is highly recommended. For each Issuer Identification Number the use (or non-use) of a PIN must be uniform. If used, it must have 4 digits ranging from 0001 9998. Caution should be used in assigning P
