ANSI ATIS 1000668-1999 Signalling System Number 7 (SS7) C Facility Request to Pivot (FRP).pdf

上传人:explodesoak291 文档编号:433610 上传时间:2018-11-11 格式:PDF 页数:39 大小:888.74KB
下载 相关 举报
ANSI ATIS 1000668-1999 Signalling System Number 7 (SS7) C Facility Request to Pivot (FRP).pdf_第1页
第1页 / 共39页
ANSI ATIS 1000668-1999 Signalling System Number 7 (SS7) C Facility Request to Pivot (FRP).pdf_第2页
第2页 / 共39页
ANSI ATIS 1000668-1999 Signalling System Number 7 (SS7) C Facility Request to Pivot (FRP).pdf_第3页
第3页 / 共39页
ANSI ATIS 1000668-1999 Signalling System Number 7 (SS7) C Facility Request to Pivot (FRP).pdf_第4页
第4页 / 共39页
ANSI ATIS 1000668-1999 Signalling System Number 7 (SS7) C Facility Request to Pivot (FRP).pdf_第5页
第5页 / 共39页
点击查看更多>>
资源描述

1、 AMERICAN NATIONAL STANDARD FOR TELECOMMUNICATIONS ATIS-1000668.1999(R2015) Signalling System Number 7 (SS7) Facility Request to Pivot (FRP) As a leading technology and solutions development organization, ATIS brings together the top global ICT companies to advance the industrys most-pressing busine

2、ss priorities. Through ATIS committees and forums, nearly 200 companies address cloud services, device solutions, emergency services, M2M communications, cyber security, ehealth, network evolution, quality of service, billing support, operations, and more. These priorities follow a fast-track develo

3、pment lifecycle from design and innovation through solutions that include standards, specifications, requirements, business use cases, software toolkits, and interoperability testing. ATIS is accredited by the American National Standards Institute (ANSI). ATIS is the North American Organizational Pa

4、rtner for the 3rd Generation Partnership Project (3GPP), a founding Partner of oneM2M, a member and major U.S. contributor to the International Telecommunication Union (ITU) Radio and Telecommunications sectors, and a member of the Inter-American Telecommunication Commission (CITEL). For more inform

5、ation, visit . AMERICAN NATIONAL STANDARD Approval of an American National Standard requires review by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of

6、Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made tow

7、ards their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the s

8、tandards. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the A

9、merican National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National

10、 Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Notice of Disclaimer theirexisten

11、ce does not in any respect preclude anyone, whether he has approvedthe standards or not, from manufacturing, marketing, purchasing, or usingproducts, processes, or procedures not conforming to the standards.The American National Standards Institute does not develop standards andwill in no circumstan

12、ces give an interpretation of any American NationalStandard. Moreover, no person shall have the right or authority to issue aninterpretation of an American National Standard in the name of the AmericanNational Standards Institute. Requests for interpretations should beaddressed to the secretariat or

13、 sponsor whose name appears on the titlepage of this standard.CAUTION NOTICE: This American National Standard may be revised orwithdrawn at any time. The procedures of the American National StandardsInstitute require that action be taken periodically to reaffirm, revise, orwithdraw this standard. Pu

14、rchasers of American National Standards mayreceive current information on all standards by calling or writing the AmericanNational Standards Institute.American National StandardPublished byAmerican National Standards Institute, Inc.11 West 42nd Street, New York, NY 10036Copyright 1999 by Alliance fo

15、r Telecommunications Industry SolutionsAll rights reserved.No part of this publication may be reproduced in anyform, in an electronic retrieval system or otherwise,without prior written permission of the publisher.Printed in the United States of AmericaiContentsPageForeword ii1 Scope, Purpose, and A

16、pplication . 12 Normative References 13 Abbreviations and Definitions . 14 Description of Network Capability. 35 Functional Capabilities and Information Flows . 136 Protocol and Procedures 19Tables1 Pivot and Transit Pivot Active State Transitions. 152 Pivot Capability Format 203 Pivot Routing Indic

17、ator Format. 20Figures1 Typical call before Pivoting. 32 Typical call after Pivot Routing . 43 Typical Call Routing after Pivot failure 44 SDL Diagram for the Pivot node. 75 SDL Diagram for the Request node . 116 FE Model for FRP. 137 Information Flow for the Simple FRP Network Capability. 168 Infor

18、mation Flow for the FRP Network Capability with Failure Scenario 179 Information Flow for the FRP Network Capability with Cancel Scenario 1810 SDL for the FRP Network Capability 25iiForeword (This foreword is not part of American National Standard T1.668-1999.)FRP is a network capability that allows

19、 an application process or other network capa-bility at a switch, having determined that a received call should be connected to adestination switch other than itself, to have the connection established from a switchearlier in the call path. If the connection attempt from the earlier switch to the de

20、stina-tion switch fails, the current switch will forward route the call to the destination switch.FRP has been developed for use between U.S. networks to meet the anticipatedneeds and applications of those entities. This standard is the result of extensive workby members of the T1S1.3 Working Group

21、on U.S. Standards for Common ChannelSignalling.This standard is intended for use in conjunction with American National Standard forTelecommunications - Signalling System Number 7 (SS7) - ISDN User Part (ISUP),ANSI T1.113-1995, which includes an overview, messages and signals, protocol for-mats, proc

22、edures, and a chapter on performance. It should be noted, however, thatsome procedures specific to this standard are extensions beyond ANSI T1.113-1995.Footnotes are not officially part of this standard.Future control of this document will reside with Accredited Standards Committee onTelecommunicati

23、ons, T1. This control of additions to the specification, such as proto-col evolution, new applications and operational requirements, will permit compatibilityamong U.S. networks. Such additions will be incorporated in an orderly manner withdue consideration to the ITU-T layered model principles, con

24、ventions, and functionalboundaries.Suggestions for improvement of this standard will be welcome. These should be sentto the Alliance for Telecommunications Industry Solutions, T1 Secretariat, 1200 GStreet, NW, Suite 500, Washington, DC 20005.This standard was processed and approved for submittal to

25、ANSI by the AccreditedStandards Committee on Telecommunications, T1. Committee approval of this stan-dard does not necessarily imply that all committee members voted for its approval. Atthe time it approved this standard, the T1 Committee had the following members:Gerald H. Peterson, ChairmanE. Raym

26、ond Hapeman, Vice-ChairmanAlvin Lai, SecretaryJay Hilton, Technical EditorRanga Dendi, Technical EditorOrganization Represented Name of RepresentativeEXCHANGE CARRIERSAmeritech . L. Richard WoodLarry A. Young (Alt.)AT otherwise, it enters thePivot active statec) after having received Pivot Routing I

27、nformation from the R FE, check that the call does not appear tobe involved in an infinite loop of Pivot requests and then initiate the connection to the Destination noded) on connection initiation toward the Destination node, release the call leg between itself and the Re-quest nodeANSI T1.668-1999

28、14e) if connection initiation toward the Destination node is not possible, send a Pivot failure indication to theRequest nodef) if Pivot Cancel Information is received from the Request node, abandon the connection initiation to theDestination node. If the Pivot Cancel Information is received after t

29、he connection initiation toward theDestination node, the P capability once again will release the call between itself and the Requestnode.If the Pivot FE while in Transit Pivot active state receives the Pivot Routing Information and there is a priorpivot active node in the call path, the Pivot FE pe

30、rforms the functions described in 5.1.1.1.The Pivot FE can signal the Pivot capability on a service-by-service or call-by-call basis. The Request FErequires that the Pivot FE explicitly identify which calls are eligible for Pivot treatment and which are not.Therefore, a Pivot FE will pass forward to

31、wards the Request FE an indication of the latest call state forwhich the P capability is supported for this call.5.1.1.1 Description of Transit Pivot Active StateThe Pivot FE is in Transit Pivot active state when it is still Pivot capable and there is a prior Pivot activenode in the call path. In su

32、ch a situation, P FE passes the Pivot Routing Information to the prior Pivot ac-tive FE. If the Pivot FE while in this Transit Pivot active state, receives the Pivot failure indication from theprior Pivot FE, it will pivot route the call to the Destination node and release the call leg to the Reques

33、tnode as described in 5.1.1. The Pivot FE passes the Pivot Cancel Information from Request node to theprior pivot active node.5.1.1.2 Pivot and Transit Pivot Active State TransitionsThe Pivot Capability column in Table 1 shows the Pivot Capabilities offered by the two P FEs. For eachcombination of P

34、ivot capability at two Pivot capable nodes, this table illustrates the state of a P FE initially encountered in the call path (Initial P FE) the state of P FE subsequently encountered in the call path (subsequent P FE) the resultant ability of a R FE to request Pivot Routingas the call progresses th

35、rough the basic call states.ANSI T1.668-199915Table 1 - Pivot and Transit Pivot Active State TransitionsPivotCall Progress States CapabilityCall State ACM ACM Call State ANM ANM Call StateInitialP FESubseq.P FEInitialP FESubseq.P FERequestFEInitialP FESubseq.P FERequestFEInitialP FESubseq.P FEReques

36、tFEACM ACM PT A I I I I I IACM ANM PT A IP A I I IACM REL PT A IP A IP AANM ACM PT A PI A I I IANM ANM PT A PT A I I IANM REL PT A PT A IP AREL ACM PT A PI API AREL ANM PT A PT API AREL REL PT A PT APT ALegend: P = Pivot active, T = Transit Pivot active, I = Inability, A = AbilityThe column headed b

37、y “Call State ACM” shows the states of the P and R FEs prior to receiving anACM. Similarly columns headed by “ACM Call State ANM” and “ANM Call State” show the states ofthe P and R FEs after receiving ACM but before receiving ANM and after receiving ANM respectively. Ta-ble cell values P, T, and I r

38、epresent respectively the Pivot active, Transit Pivot active, and Inactive statesfor P FEs. Table cell values A and I represent the resultant Ability or Inability of the R FE to request PivotRouting.5.1.3 Description of Request Functional EntityThe R FE is in a Request node. The R FE contains the pi

39、vot requesting capability that can- receive Pivot Capability Information pertaining to a specific call,- send Pivot Routing Information to the Pivot functional entity and start the Pivot timer if Pivoting is in-voked,- proceed with the call setup to the Destination node if the Pivot failure indicati

40、on is received from theP FE, and- if the Pivot timer expires, send the Pivot Cancel Information to the Pivot node to withdraw its earlierpivot request. At this point R FE initiates the call setup to the Destination node.5.1.4 Description of the Supplementary Functional EntitiesSp, Sr, and Sdrepresen

41、t supplementary FEs that invoke the P function, the R function, or that provide ad-ditional supplementary services related to the call in the Destination node. The supplementary FEs repre-sent actions performed to support supplementary services or other network capabilities at the Pivot, Re-quest, a

42、nd Destination nodes. They may also represent node management actions controlling the opera-tion of FRP. Except for their role in controlling P and R FEs, as defined in this subclause, the actions ofthese FEs are outside the scope of the FRP network capability.The supplementary FEs can access inform

43、ation from basic and supplementary call control messages re-layed by their associated basic call control FEs. They may also direct the basic call control entities totransmit information required for their operation in basic or supplementary call control messages.The Request supplementary functional

44、entity, Sr, invokes the R FE, derives the new destination informa-tion to be passed from its associated R FE to P, and may derive additional optional information to bepassed. (Optional information used by the supplementary services is outside the scope of FRP.)ANSI T1.668-199916The Pivot supplementa

45、ry functional entity, Sp, may direct its associated P FE to signal or withhold the sig-nal of its capability for providing the P function. On receipt of a Pivot Request with Pivot Routing Informa-tion for a call whose incoming call setup message indicated the existence of a Pivot active node earlier

46、 inthe call path, Sp, may direct P to pass Pivot Request to the earlier Pivot active node (the default action) orto establish the call to the destination node.5.1.5 Description of the Intermediate Functional EntitiesThe intermediate FEs I1, I2, I3, and I4represent functions taking place at intermedi

47、ate nodes between anycombination pair of Pivot, Request, and Destination nodes. These functions are the basic call control, andrelaying of the supplementary information. For R and P FEs, the supplementary information is either PivotCapability Information, Pivot Routing Information, or Pivot Cancel I

48、nformation. Information relayed on be-half of the supplementary FEs is outside the scope of FRP.5.2 Information Flow ModelThe normal procedures of FRP are described in five parts as described in 4.3.2.2 Invocation and Opera-tion. The following paragraphs describe the FRP information flow model by us

49、ing the same five parts.Part 1: FRP Eligible CallTo invoke the FRP capability, a P FE has to receive a call request, and to be in the process of setting up acall to a R FE. When it, in cooperation with the supplementary FEs, decides that a call will be eligible forFRP, the P FE sends Pivot Capability Information to the R FE. If P FE received the Pivot Capability Infor-mation in the incoming call setup, it will send toward R FE the Pivot Capability value reflecting the larger(later) of the received capability and its own capability.If FRP capability is not desired on a call, no Piv

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1