ANSI AWS A1.1-2016 Metric Practice Guide for the Welding Industry《焊接工业的米制实施规程指南》.pdf

上传人:王申宇 文档编号:433671 上传时间:2018-11-11 格式:PDF 页数:60 大小:843.72KB
下载 相关 举报
ANSI AWS A1.1-2016 Metric Practice Guide for the Welding Industry《焊接工业的米制实施规程指南》.pdf_第1页
第1页 / 共60页
ANSI AWS A1.1-2016 Metric Practice Guide for the Welding Industry《焊接工业的米制实施规程指南》.pdf_第2页
第2页 / 共60页
ANSI AWS A1.1-2016 Metric Practice Guide for the Welding Industry《焊接工业的米制实施规程指南》.pdf_第3页
第3页 / 共60页
ANSI AWS A1.1-2016 Metric Practice Guide for the Welding Industry《焊接工业的米制实施规程指南》.pdf_第4页
第4页 / 共60页
ANSI AWS A1.1-2016 Metric Practice Guide for the Welding Industry《焊接工业的米制实施规程指南》.pdf_第5页
第5页 / 共60页
点击查看更多>>
资源描述

1、Metric Practice Guide for the Welding IndustryAWS A1.1:2016An American National StandardAWS A1.1:2016An American National StandardApproved byAmerican National Standards InstituteAugust 30, 2016Metric Practice Guide for the Welding Industry Supersedes AWS A1.1:2001Prepared by theAmerican Welding Soci

2、ety (AWS) A1 Committee on Metric PracticeUnder the Direction of theAWS Technical Activities CommitteeApproved by theAWS Board of DirectorsAbstractThis metric practice guide is based on the International System of Units (SI) as defined in the U.S. Federal Register notice of July 28, 1998, “Metric Sys

3、tem of Measurement: Interpretation of the International System of Units for the United States.” It includes the base units, derived units, and rules for their use. Also covered are conversion factors and rules for their use in converting U.S. customary units to SI units.Recommendations are presented

4、 for style and usage in such areas as prefixes, punctuation, number grouping, etc. There are also suggestions to industry for managing the transition.AWS A1.1:2016iiISBN: 978-0-87171-896-92016 by American Welding SocietyAll rights reservedPrinted in the United States of AmericaPhotocopy Rights. No p

5、ortion of this standard may be reproduced, stored in a retrieval system, or transmitted in any form, including mechanical, photocopying, recording, or otherwise, without the prior written permission of the copyright owner. Authorization to photocopy items for internal, personal, or educational class

6、room use only or the internal, personal, or educational classroom use only of specific clients is granted by the American Welding Society provided that the appropri-ate fee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, tel: (978) 750-8400; Internet: .AWS A1.1:2016

7、iiiStatement on the Use of American Welding Society StandardsAll standards (codes, specifications, recommended practices, methods, classifications, and guides) of the American Welding Society (AWS) are voluntary consensus standards that have been developed in accordance with the rules of the America

8、n National Standards Institute (ANSI). When AWS American National Standards are either incorporated in, or made part of, documents that are included in federal or state laws and regulations, or the regulations of other governmen-tal bodies, their provisions carry the full legal authority of the stat

9、ute. In such cases, any changes in those AWS standards must be approved by the governmental body having statutory jurisdiction before they can become a part of those laws and regulations. In all cases, these standards carry the full legal authority of the contract or other document that invokes the

10、AWS standards. Where this contractual relationship exists, changes in or deviations from requirements of an AWS standard must be by agreement between the contracting parties.AWS American National Standards are developed through a consensus standards development process that brings together volunteer

11、s representing varied viewpoints and interests to achieve consensus. While AWS administers the proc-ess and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments con

12、tained in its standards.AWS disclaims liability for any injury to persons or to property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance on this standard. AWS also makes

13、no guarantee or warranty as to the accuracy or completeness of any information pub-lished herein.In issuing and making this standard available, AWS is neither undertaking to render professional or other services for or on behalf of any person or entity, nor is AWS undertaking to perform any duty owe

14、d by any person or entity to someone else. Anyone using these documents should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. It is assumed that the use of this sta

15、ndard and its provisions is entrusted to appropriately qualified and competent personnel.This standard may be superseded by new editions. This standard may also be corrected through publication of amend-ments or errata, or supplemented by publication of addenda. Information on the latest editions of

16、 AWS standards includ-ing amendments, errata, and addenda is posted on the AWS web page (www.aws.org). Users should ensure that they have the latest edition, amendments, errata, and addenda.Publication of this standard does not authorize infringement of any patent or trade name. Users of this standa

17、rd accept any and all liabilities for infringement of any patent or trade name items. AWS disclaims liability for the infringement of any patent or product trade name resulting from the use of this standard.AWS does not monitor, police, or enforce compliance with this standard, nor does it have the

18、power to do so.Official interpretations of any of the technical requirements of this standard may only be obtained by sending a request, in writing, to the appropriate technical committee. Such requests should be addressed to the American Welding Society, Attention: Managing Director, Technical Serv

19、ices Division, 8669 NW 36 St, # 130, Miami, FL 33166 (see Annex J). With regard to technical inquiries made concerning AWS standards, oral opinions on AWS standards may be rendered. These opinions are offered solely as a convenience to users of this standard, and they do not constitute professional

20、advice. Such opinions represent only the personal opinions of the particular individuals giving them. These individuals do not speak on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations of AWS. In addi-tion, oral opinions are informal and should

21、not be used as a substitute for an official interpretation.This standard is subject to revision at any time by the AWS A1 Committee on Metric Practice. It must be reviewed every five years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recommendations, additions, or dele-t

22、ions) and any pertinent data that may be of use in improving this standard are requested and should be addressed to AWS Headquarters. Such comments will receive careful consideration by the AWS A1 Committee on Metric Practice and the author of the comments will be informed of the Committees response

23、 to the comments. Guests are invited to attend all meetings of the AWS A1 Committee on Metric Practice to express their comments verbally. Procedures for appeal of an adverse decision concerning all such comments are provided in the Rules of Operation of the Technical Activities Committee. A copy of

24、 these Rules can be obtained from the American Welding Society, 8669 NW 36 St, # 130, Miami, FL 33166.AWS A1.1:2016ivThis page is intentionally blank.AWS A1.1:2016vPersonnelAWS Committee on Metric PracticeG. D. Uttrachi, Chair WA Technology, LLCJ. Letki, Vice Chair General ElectricS. P. Hedrick, Sec

25、retary American Welding SocietyB. B. Barrow Defense Information Systems Agency, retiredJ. R. Frysinger Metric Methods; College of Charleston, retiredE. A. Mechtly University of IllinoisAdvisors to the AWS Committee on Metric PracticeJ. Liu Subsea Technology IncA. Rabinkin Metglas Inc Hitachi MetalsS

26、. K. Saha New York State Department of TransportationAWS A1.1:2016viThis page is intentionally blank.AWS A1.1:2016viiForewordThis foreword is not part of this standard but is included for informational purposes only.The AWS Metrication Policy states, in part, “The AWS supports a timely transition to

27、 the use of SI units.” At the present time, the U.S. stands alone as the only industrial country that still predominantly uses the inch-pound units of measure-ment. Since the signing of the Metric Act of 1975 and an initial flurry of transition, the voluntary feature of the Act allowed the impetus t

28、o stagnate. The U.S. industrial and commercial productivity, mathematics and science education, and the competitiveness of our products and services in world markets would be enhanced by the adoption of the metric system. Americans have, so far, only made ineffective attempts at public education and

29、 awareness of the metric system.It is of historical interest that in the late 1700s Benjamin Franklin and Thomas Jefferson strongly supported decimal measurement and decimal currency. They were successful in having the US use a decimal currency but not the decimal measurement system they also promot

30、ed. In fact, in 1790 George Washington in his first annual message to Congress reminded the legislators “Uniformity in the currency, weights, and measures of the United States is an object of great importance, and will, I am persuaded, be duly attended to.” The metric system of measurement was part

31、of the reforms Napoleon enacted and it was spread to all the lands under his control. This coherent method of measurement served to fuel the scientific progress of the coming decades. The USA, in fact, had a major influence on the measurement leaders in France, who were developing the decimal metric

32、 system to become the legal French measuring system. It should be noted that, by acts of Congress, the metric system has been legal for use in all commercial and legal dealings in the US since 1866 and it was declared to be the “preferred system of measurement” in 1988.Simple conversation is not the

33、 answer. The use of two different unit systems was the cause of the loss of the Mars Climate Orbiter. NASA specified metric units for its design and construction but one subcontractor provided thruster performance data in pound force seconds instead of newton seconds. The spacecraft was intended to

34、orbit Mars at 150 kilometers altitude, but incorrect data caused it to descend instead to about 57 kilometers burning the orbiter up in the Martian atmos-phere. In addition to being a source of errors, simple mathematical conversion creates inconsistencies in allowable toler-ances. It also causes ex

35、tra cost when rounding causes tighter tolerances than specified in the original design. Even the countries that were using metric measurement had to make compromises and changes to have a truly uniform system, which we now refer to as SI (International Standard.) A recent example was the value of a

36、teaspoon, which was different in several countries. When dispensing medicine an accurate value is critical. There is now a unified SI value for this measure. The AWS Metric Practice Committee has tried to remain congruent with these unification changes, as have other Societies such as IEEE and ASME.

37、The American Welding Society has made significant progress in including SI units in our standards documents and in our published Welding Journal. This has helped make them accepted World Wide. This 6thedition reflects the current “state of the art” in SI practice for the U.S. welding industry and wi

38、ll assist the welding industry in converting to SI units and promote their voluntary use.Comments and suggestions for the improvement of this standard are welcome. They should be sent to the Secretary, AWS Committee on Metric Practice, American Welding Society, 8669 NW 36 St, # 130, Miami, FL 33166.

39、AWS A1.1:2016viiiThis page is intentionally blank.AWS A1.1:2016ixTable of ContentsPage No.Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vForeword . . . . . . . . . . . .

40、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viiList of Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41、. . . . . . . . . . . . xi1. Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12. The International System of Units (SI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42、 . . . . . . . . . . . . . . . . . . . . . . . . . .12.1 Completeness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12.2 Coherence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22.3 Uniqueness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22.4 Advantages of the SI . . . . . . . . . . . . . . . . .

44、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23. SI Units and Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23.1 SI Base Units . . . . . . . . . . .

45、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23.2 SI Derived Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23.3 Prefixes . .

46、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24. Other Units Used with SI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

47、. . . . .25. Units Pertaining to Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56. Style and Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48、. . . . . . . . . . . . . . . . . .56.1 Application and Usage of Prefixes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56.2 Mass, Force, and Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49、. . . . . . . . . . . . . . . . . . . .66.3 Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86.4 Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86.5 Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86.6 Stress and Pressure . . . . . . . . . . . . . . . . . . .

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1