1、Specification forMagnesium AlloyWelding Electrodesand RodsANSI/AWS A5.19-92 (R2006)An American National Standard550 N.W. LeJeune Road, Miami, FL 33126ANSI/AWS A5.19-92 (R2006)An American National StandardApproved by theAmerican National Standards InstituteApril 21, 1992Specification forMagnesium All
2、oy WeldingElectrodes and RodsSupersedes AWS A5.19-90Prepared by theAmerican Welding Society (AWS) A5 Committee on Filler MetalUnder the Direction of theAWS Technical Activities CommitteeApproved by theAWS Board of DirectorsAbstractThis specification prescribes requirements for the classification of
3、bare magnesium alloy welding electrodes and rods foruse with the gas metal arc, gas tungsten arc, oxyfuel gas, and plasma arc welding processes. Classification is based uponchemical composition of the welding wire. Standard sizes, finish, winding requirements, package forms and weights,product infor
4、mation, and chemical composition limits are specified.Key WordsBare magnesium alloy, filler metal, gas metal arc welding, gas tungsten arc welding, magnesium electrodes, magnesium rods, oxyfuel gas welding, plasma arc weldingANSI/AWS A5.19-92 (R2006)iiInternational Standard Book Number: 0-87171-399-
5、3American Welding Society550 N.W. LeJeune Road, Miami, FL 33126 1992 by American Welding SocietyAll rights reservedPrinted in the United States of AmericaReaffirmed: January 11, 2006Photocopy Rights. No portion of this standard may be reproduced, stored in a retrieval system, or transmitted in anyfo
6、rm, including mechanical, photocopying, recording, or otherwise, without the prior written permission of the copyrightowner.Authorization to photocopy items for internal, personal, or educational classroom use only or the internal, personal, oreducational classroom use only of specific clients is gr
7、anted by the American Welding Society provided that the appropriatefee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, tel: (978) 750-8400; Internet:.iiiANSI/AWS A5.19-92 (R2006)Statement on Use of AWS American National StandardsAll standards (codes, specifications,
8、 recommended practices, methods, classifications, and guides) of the AmericanWelding Society (AWS) are voluntary consensus standards that have been developed in accordance with the rules of theAmerican National Standards Institute (ANSI). When AWS standards are either incorporated in, or made part o
9、f,documents that are included in federal or state laws and regulations, or the regulations of other governmental bodies,their provisions carry the full legal authority of the statute. In such cases, any changes in those AWS standards must beapproved by the governmental body having statutory jurisdic
10、tion before they can become a part of those laws andregulations. In all cases, these standards carry the full legal authority of the contract or other document that invokes theAWS standards. Where this contractual relationship exists, changes in or deviations from requirements of an AWSstandard must
11、 be by agreement between the contracting parties.AWS American National Standards are developed through a consensus standards development process that bringstogether volunteers representing varied viewpoints and interests to achieve consensus. While AWS administers the processand establishes rules to
12、 promote fairness in the development of consensus, it does not independently test, evaluate, orverify the accuracy of any information or the soundness of any judgments contained in its standards.AWS disclaims liability for any injury to persons or to property, or other damages of any nature whatsoev
13、er, whetherspecial, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or relianceon this standard. AWS also makes no guaranty or warranty as to the accuracy or completeness of any informationpublished herein.In issuing and making this standard av
14、ailable, AWS is not undertaking to render professional or other services for or onbehalf of any person or entity. Nor is AWS undertaking to perform any duty owed by any person or entity to someoneelse. Anyone using these documents should rely on his or her own independent judgment or, as appropriate
15、, seek theadvice of a competent professional in determining the exercise of reasonable care in any given circumstances.This standard may be superseded by the issuance of new editions. Users should ensure that they have the latest edition.Publication of this standard does not authorize infringement o
16、f any patent or trade name. Users of this standard acceptany and all liabilities for infringement of any patent or trade name items. AWS disclaims liability for the infringement ofany patent or product trade name resulting from the use of this standard.Finally, AWS does not monitor, police, or enfor
17、ce compliance with this standard, nor does it have the power to do so.On occasion, text, tables, or figures are printed incorrectly, constituting errata. Such errata, when discovered, are postedon the AWS web page (www.aws.org).Official interpretations of any of the technical requirements of this st
18、andard may only be obtained by sending a request,in writing, to the Managing Director, Technical Services Division, American Welding Society, 550 N.W. LeJeune Road,Miami, FL 33126. With regard to technical inquiries made concerning AWS standards, oral opinions on AWS standardsmay be rendered. Howeve
19、r, such opinions represent only the personal opinions of the particular individuals giving them.These individuals do not speak on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions orinterpretations of AWS. In addition, oral opinions are informal and should not be u
20、sed as a substitute for an officialinterpretation.This standard is subject to revision at any time by the AWS A5 Committee on Filler Metal. It must be reviewed everyfive years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recommendations, additions, ordeletions) and any p
21、ertinent data that may be of use in improving this standard are required and should be addressed toAWS Headquarters. Such comments will receive careful consideration by the AWS A5 Committee on Filler Metal andthe author of the comments will be informed of the Committees response to the comments. Gue
22、sts are invited to attendall meetings of the AWS A5 Committee on Filler Metal to express their comments verbally. Procedures for appeal ofan adverse decision concerning all such comments are provided in the Rules of Operation of the Technical ActivitiesCommittee. A copy of these Rules can be obtaine
23、d from the American Welding Society, 550 N.W. LeJeune Road, Miami,FL 33126.This page is intentionally blank.ivANSI/AWS A5.19-92 (R2006)vANSI/AWS A5.19-92 (R2006)Personnel (Original)AWS A5 Committee on Filler MetalD. J. Kotecki, Chair The Lincoln Electric CompanyR. A. LaFave, 1st Vice Chair Elliott C
24、ompanyJ. P. Hunt, 2nd Vice Chair Inco Alloys InternationalH. F. Reid, Secretary American Welding SocietyB. E. Anderson AlcoTecK. E. Banks Teledyne McKayR. S. Brown Carpenter Technology CorporationJ. Caprarola, Jr. Alloy Rods Corporation*L. J. Christensen ConsultantR. J. Christoffel ConsultantD. A. D
25、elSignore Westinghouse Electric CompanyH. W. Ebert Exxon Research and EngineeringS. E. Ferree Alloy Rods CorporationD. A. Fink The Lincoln Electric CompanyG. Hallstrom, Jr. USNRC-RII*R. L. Harris R. L. Harris AssociatesR. W. Heid Newport News ShipbuildingD. C. Helton ConsultantW. S. Howes National E
26、lectrical Manufacturers AssociationR. W. Jud Chrysler MotorsR. B. Kadiyala Techalloy Maryland, Incorporated*P. A. Kammer Eutectic CorporationJ. E. Kelly Eutectic CorporationG. A. Kurisky Maryland Specialty WireN. E. Larson Union Carbide, Industrial Gas DivisionA. S. Laurenson ConsultantG. H. MacShan
27、e MAC AssociatesD. F. Manning Hobart Brothers CompanyM. T. Merlo Tri-Mark, IncorporatedS. J. Merrick Teledyne McKay*G. E. Metzger Air Force Materials LaboratoryJ. W. Mortimer ConsultantC. L. Null Department of the Navy*Y. Ogata Kobe Steel LimitedJ. Payne Schneider Services InternationalR. L. Peaslee
28、 Wall Colmonoy CorporationE. W. Pickering ConsultantM. A. Quintana General Dynamics Corporation*S. D. Reynolds, Jr. Westinghouse Electric PGBUL. F. Roberts Canadian Welding BureauD. Rozet ConsultantP. K. Salvesen American Bureau of Shipping*H. S. Sayre ConsultantO. W. Seth Chicago Bridge and Iron Co
29、mpany*Advisor*DeceasedviANSI/AWS A5.19-92 (R2006)*Advisor*DeceasedAWS A5 Committee on Filler Metals (Continued)W. A. Shopp SAEM. S. Sierdzinski Alloy Rods Corporation*R. W. Straiton Bechtel Group, IncorporatedR. D. Sutton L-Tec Welding and Cutting SystemsR. A. Swain Welders SupplyJ. W. Tackett Hayne
30、s International IncorporatedR. D. Thomas, Jr. R. D. Thomas and Company*R. Timerman Conarco, S. A.R. T. Webster Teledyne Wah Chang*A. E. Wiehe Consultant*W.A. Wiehe Arcos AlloysW. L. Wilcox Consultant*F. J. Winsor ConsultantK G. Wold Aqua Chem, IncorporatedT. J. Wonder VSE CorporationAWS Subcommittee
31、 on Magnesium Alloy Filler Metals*G. E. Metzger, Chair Air Force Materials LaboratoryH. F. Reid, Secretary American Welding Society*J. F. Brown Kaiser Aluminum and Chemical Corporation*A. T. DAnnessa AT telephone (305) 443-9353; fax (305) 443-5951; e-mail infoaws.org; or via the AWS web site.Officia
32、l interpretations of any of the technical requirements of this standard may be obtained by sending a request, inwriting, to the Managing Director, Technical Services Division, American Welding Society. A formal reply will beissued after it has been reviewed by the appropriate personnel following est
33、ablished procedures.This page is intentionally blank.xANSI/AWS A5.19-92 (R2006)xiANSI/AWS A5.19-92 (R2006)Table of ContentsPage No.PersonnelvForeword .ixTable of Contents.xiList of Tables xiiList of Figures.xii1. Scope1Part AGeneral Requirements .12. Classification.13. Acceptance 14. Certification15
34、. Units of Measure and Rounding-Off Procedure .1Part BTests, Procedures, and Requirements 36. Summary of Tests.37. Retest .38. Weld Test Assemblies 39. Chemical Analysis 510. Radiographic Test 511. Bead-on-Plate Test .5Part CManufacture, Identification, and Packaging512. Method of Manufacture.513. S
35、tandard Sizes 614. Finish and Uniformity .615. Standard Package Forms 616. Winding Requirements817. Filler Metal Identification .818. Packaging819. Marking of Packages .8AppendixGuide to AWS Specification for Magnesium Alloy Welding Electrodes and Rods .11A1. Introduction11A2. Classification System.
36、11A3. Acceptance .11A4. Certification .11A5. Ventilation During Welding.12A6. Welding Considerations.12A7. Description and Use of Magnesium Alloy Electrodes and Rods.12A8. Special Tests 13A9. General Safety Considerations.13AWS Filler Metal Specifications and Related Documents 19xiiANSI/AWS A5.19-92
37、 (R2006)List of TablesTable Page No.1 Chemical Composition Requirements for Magnesium Alloy Electrodes and Rods22 Required Tests33 Base Metal for Test Assemblies.34 Standard Sizes 75 Standard Packages, Dimensions, and Weights 7Al Guide to the Choice of Filler Metal for General Purpose Welding .14Lis
38、t of FiguresFigure Page No.1 Groove Weld Test Assembly for Radiographic Test .42 Radiographic Acceptance Standards for Test AssembliesOverhead Welding Position63 Radiographic Acceptance Standard for Test AssembliesFlat Welding Position 74 Dimensions of 4 in. (100 mm) Diameter Spool .95 Dimensions of
39、 8 and 12 in. (200 and 300 mm) Diameter Spools96 Dimensions of 13-1/2 in. (340 mm) Diameter Spool.10ANSI/AWS A5.19-92 (R2006)1Specification forMagnesium Alloy WeldingElectrodes and Rods1. See A3. Acceptance (in the Appendix) for further informa-tion concerning acceptance and testing of the material
40、shipped.2. AWS standards are published by the American WeldingSociety, 550 N.W. LeJeune Road, Miami, FL 33126.3. See A4. Certification (in the Appendix) for further informa-tion concerning certification and the testing called for to meetthis requirement.2. ASTM standards are published by the America
41、n Society ofTesting and Materials, 100 Barr Harbor Drive, West Consho-hocken, PA 19428-2959.ANSI/AWS A5.19-92 (R2006)2ANSI/AWS A5.19-92 (R2006)3ANSI/AWS A5.19-92 (R2006)4ANSI/AWS A5.19-92 (R2006)5ANSI/AWS A5.19-92 (R2006)6ANSI/AWS A5.19-92 (R2006)7ANSI/AWS A5.19-92 (R2006)8ANSI/AWS A5.19-92 (R2006)9
42、ANSI/AWS A5.19-92 (R2006)10ANSI/AWS A5.19-92 (R2006)11AppendixGuide to AWS Specification forMagnesium Alloy Welding Electrodes and RodsThis appendix is not a part of ANSI/AWS A5.19-92 (R2006), Specification for MagnesiumAlloy Welding Electrodes and Rods, but is included for informational purposes only.ANSI/AWS A5.19-92 (R2006)12ANSI/AWS A5.19-92 (R2006)13ANSI/AWS A5.19-92 (R2006)14ANSI/AWS A5.19-92 (R2006)15ANSI/AWS A5.19-92 (R2006)16ANSI/AWS A5.19-92 (R2006)17
