ANSI AWS B2.1-1-027-2011 Standard Welding Procedure Specification (SWPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1 or P-1 Groups 1 and 2) 1 8 through 1 2 inch T.pdf

上传人:twoload295 文档编号:433753 上传时间:2018-11-11 格式:PDF 页数:22 大小:586.51KB
下载 相关 举报
ANSI AWS B2.1-1-027-2011 Standard Welding Procedure Specification (SWPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1 or P-1 Groups 1 and 2) 1 8 through 1 2 inch T.pdf_第1页
第1页 / 共22页
ANSI AWS B2.1-1-027-2011 Standard Welding Procedure Specification (SWPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1 or P-1 Groups 1 and 2) 1 8 through 1 2 inch T.pdf_第2页
第2页 / 共22页
ANSI AWS B2.1-1-027-2011 Standard Welding Procedure Specification (SWPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1 or P-1 Groups 1 and 2) 1 8 through 1 2 inch T.pdf_第3页
第3页 / 共22页
ANSI AWS B2.1-1-027-2011 Standard Welding Procedure Specification (SWPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1 or P-1 Groups 1 and 2) 1 8 through 1 2 inch T.pdf_第4页
第4页 / 共22页
ANSI AWS B2.1-1-027-2011 Standard Welding Procedure Specification (SWPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1 or P-1 Groups 1 and 2) 1 8 through 1 2 inch T.pdf_第5页
第5页 / 共22页
点击查看更多>>
资源描述

1、AWS B2.1-1-027:2011An American National StandardStandard Welding ProcedureSpecification (SWPS) forSelf-Shielded FluxCored Arc Weldingof Carbon Steel(M-1 or P-1, Groups1 and 2), 1/8 through1/2 inchThick, E71T-11,As-Welded Condition,Primarily Plate andStructural ApplicationsSite LicenseAWS B2.1-1-027:

2、2011An American National StandardApproved by theAmerican National Standards InstituteJune 28, 2011Standard Welding Procedure Specification (SWPS) forSelf-Shielded Flux Cored Arc Welding ofCarbon Steel (M-1 or P-1, Groups 1 and 2),1/8 through 1/2 inch Thick, E71T-11,As-Welded Condition, PrimarilyPlat

3、e and Structural Applications3rd EditionSupersedes ANSI/AWS B2.1-1-027:1998Prepared by theAmerican Welding Society (AWS) B2 Committee on Procedure and Performance QualificationUnder the Direction of theAWS Technical Activities CommitteeApproved by theAWS Board of DirectorsAbstractThis standard conta

4、ins the essential welding variables for carbon steel in the thickness range of 1/8 through 1/2 inch,using self-shielded flux cored arc welding. It cites the base metals and operating conditions necessary to make theweldment, the filler metal specifications, and the allowable joint designs for groove

5、 and fillet welds. This SWPS wasdeveloped primarily for plate and structural applications.AWS B2.1-1-027:2011International Standard Book Number: 978-0-87171-791-7American Welding Society550 N.W. LeJeune Road, Miami, FL 33126 2011 by American Welding SocietyAll rights reservedPrinted in the United St

6、ates of AmericaiiAWS B2.1-1-027:2011Statement on the Use of American Welding Society StandardsAll standards (codes, specifications, recommended practices, methods, classifications, and guides) of the AmericanWelding Society (AWS) are voluntary consensus standards that have been developed in accordan

7、ce with the rules of theAmerican National Standards Institute (ANSI). When AWS American National Standards are either incorporated in, ormade part of, documents that are included in federal or state laws and regulations, or the regulations of other govern-mental bodies, their provisions carry the fu

8、ll legal authority of the statute. In such cases, any changes in those AWSstandards must be approved by the governmental body having statutory jurisdiction before they can become a part ofthose laws and regulations. In all cases, these standards carry the full legal authority of the contract or othe

9、r documentthat invokes the AWS standards. Where this contractual relationship exists, changes in or deviations from requirementsof an AWS standard must be by agreement between the contracting parties.AWS American National Standards are developed through a consensus standards development process that

10、 bringstogether volunteers representing varied viewpoints and interests to achieve consensus. While the AWS administers theprocess and establishes rules to promote fairness in the development of consensus, it does not independently test, evalu-ate, or verify the accuracy of any information or the so

11、undness of any judgments contained in its standards.AWS disclaims liability for any injury to persons or to property, or other damages of any nature whatsoever, whetherspecial, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or relianceon this

12、 standard. AWS also makes no guarantee or warranty as to the accuracy or completeness of any informationpublished herein.In issuing and making this standard available, AWS is neither undertaking to render professional or other services for oron behalf of any person or entity, nor is AWS undertaking

13、to perform any duty owed by any person or entity to someoneelse. Anyone using these documents should rely on his or her own independent judgment or, as appropriate, seek theadvice of a competent professional in determining the exercise of reasonable care in any given circumstances. It isassumed that

14、 the use of this standard and its provisions are entrusted to appropriately qualified and competent personnel.This standard may be superseded by the issuance of new editions. Users should ensure that they have the latest edition.Publication of this standard does not authorize infringement of any pat

15、ent or trade name. Users of this standard acceptany and all liabilities for infringement of any patent or trade name items. AWS disclaims liability for the infringement ofany patent or product trade name resulting from the use of this standard.Finally, the AWS does not monitor, police, or enforce co

16、mpliance with this standard, nor does it have the power to do so.On occasion, text, tables, or figures are printed incorrectly, constituting errata. Such errata, when discovered, are postedon the AWS web page (www.aws.org).Official interpretations of any of the technical requirements of this standar

17、d may only be obtained by sending a request, inwriting, to the appropriate technical committee. Such requests should be addressed to the American Welding Society,Attention: Managing Director, Technical Services Division, 550 N.W. LeJeune Road, Miami, FL 33126 (see Annex A).With regard to technical i

18、nquiries made concerning AWS standards, oral opinions on AWS standards may be rendered.These opinions are offered solely as a convenience to users of this standard, and they do not constitute professionaladvice. Such opinions represent only the personal opinions of the particular individuals giving

19、them. These individuals donot speak on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations ofAWS. In addition, oral opinions are informal and should not be used as a substitute for an official interpretation.This standard is subject to revision at

20、any time by the AWS B2 Committee on Procedure and Performance Qualification.It must be reviewed every five years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recom-mendations, additions, or deletions) and any pertinent data that may be of use in improving this standard a

21、re requiredand should be addressed to AWS Headquarters. Such comments will receive careful consideration by the AWS B2Committee on Procedure and Performance Qualification and the author of the comments will be informed of the Com-mittees response to the comments. Guests are invited to attend all mee

22、tings of the AWS B2 Committee on Procedureand Performance Qualification to express their comments verbally. Procedures for appeal of an adverse decisionconcerning all such comments are provided in the Rules of Operation of the Technical Activities Committee. A copy ofthese Rules can be obtained from

23、 the American Welding Society, 550 N.W. LeJeune Road, Miami, FL 33126.iiiAWS B2.1-1-027:2011ivPersonnelAWS B2 Committee on Procedure and Performance QualificationJ. J. Fluckiger, Chair Idaho National LaboratoryJ. L. Cooley, Vice Chair J. C. and Associates, IncorporatedB. Beckman, 2nd Vice Chair Cons

24、ultantS. Morales, Secretary American Welding SocietyD. M. Allbritten GE Equipment ServicesRailL. P. Connor ConsultantD. W. Craig Computer Engineering, IncorporatedW. D. Doty Doty and Associates, IncorporatedE. H. Gray U.S. Nuclear Regulatory CommissionB. J. Hable Ford Motor CompanyM. F. Herrle Arise

25、, IncorporatedR. A. LaFave ConsultantK. Y. Lee U.S. Department of TransportationG. S. Michels Summit ConsultingA. S. Olivares HSB Global StandardsJ. F. Pike NASA Langley Research CenterW. M. Ruof Bechtel Plant Machinery, IncorporatedJ. J. Sekely Welding Services, IncorporatedM. R. Stone Canadian Wel

26、ding BureauG. M. Wisbrock, Jr. ConsultantR. K. Wiswesser Welder Training Including Terms for Adhesive Bonding, Brazing,Soldering, Thermal Cutting, and Thermal Spraying. Welding symbols shall be those shown in the latest edition of AWSA2.4, Standard Symbols for Welding, Brazing, and Nondestructive Ex

27、amination.The AWS Committee on Welding Qualification was formed in 1979 to provide welding standards concerning the subjectof qualification. The primary document developed by this committee is AWS B2.1, Specification for Welding Procedureand Performance Qualification. This document established the f

28、oundation and framework for Standard Welding ProcedureSpecifications.This standard was revised to incorporate base metal thickness limitations adopted by AWS A5.20/A5.20M and also todelete reference to 0.045 in diameter E71T-11 electrode. All references to ASME “S” material numbers have also beendel

29、eted from this edition. This standard supersedes ANSI/AWS B2.1-1-027:1998.Underlined text in clauses, tables, or figures indicates an editorial or technical change from the 1998 edition. A verticalline in the margin also indicates a revision from the 1998 edition.Comments and suggestions for the imp

30、rovement of this standard are welcome. They should be sent to the Secretary,AWS B2 Committee on Welding Procedure and Performance Qualification, American Welding Society, 550 N.W. LeJeuneRoad, Miami, FL 33126.vAWS B2.1-1-027:2011Page 1 of 15Standard Welding Procedure Specification (SWPS)Permission t

31、o reproduce for intra-company use only is granted by the American Welding SocietySelf-Shielded Flux Cored Arc Welding of Carbon Steel (M-1 or P-1,Groups 1 and 2), 1/8 through 1/2 inch Thick, E71T-11, As-WeldedCondition, Primarily Plate and Structural ApplicationsWelding Research CouncilSupporting PQ

32、R Numbers: 007014, 007015,007016, 200015, 200293, 200295, 200296, 200431, 200432, 200433, 200434,200600, 200601, 200602, 200603, 200608, 200609, 200610, 200731, 200732,200733, 200787, 200790, 200791, 200794, 200796Requirements for Application of SWPSsScope. The data to support this Standard Welding

33、Procedure Specification (SWPS) have been derived fromthe above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspicesof the Welding Research Council. This SWPS is not valid using conditions and variables outside the rangeslisted. The American Welding Socie

34、ty considers that this SWPS presents information for producing anacceptable weld using the conditions and variables listed. The user needs a significant knowledge of weldingand accepts full responsibility for the performance of the weld and for providing the engineering capability,qualified personne

35、l, and proper equipment to implement this SWPS.Application. This SWPS is to be used only as permitted by AWS B2.1, Specification for Procedure and Per-formance Qualification, and the applicable fabrication document(s) such as code, specification, or contractdocument(s). The fabrication document(s) s

36、hould specify the engineering requirements such as design,need for heat treatment, fabricating tolerances, quality control, and examination and tests applicable to theend product.Users Responsibility. An SWPS does not replace or substitute for fabrication codes, specifications, contractrequirements,

37、 or capability and judgment on the part of the user. An SWPS is to be used only as permitted bythe applicable fabrication code, specification, or contract document.The ability to produce production welds having properties suitable for the application depends upon supple-menting the SWPS with appropr

38、iate performance qualification tests and sound engineering judgment. Theuser is responsible for the quality and performance of the final product in accordance with the provisions ofthe fabrication document(s).Supplementary Instructions. To adapt this SWPS to a specific application, a user may issue

39、supplementaryinstructions. Such instructions may consist of tighter fit-up tolerances, higher minimum preheat temperature,or any other instructions necessary to produce a weldment that meets the requirements of the fabricationdocument(s). These instructions shall not be less restrictive than provide

40、d in the SWPS.Safety. Safety precautions shall conform to the latest edition of ANSI Z49.1, Safety in Welding, Cutting, andAllied Processes, published by the American Welding Society.This specification may involve hazardous materials, operations, and equipment. The specification does notpurport to a

41、ddress all of the safety problems associated with its use. It is the responsibility of the user toestablish appropriate safety and health practices. The user should determine the applicability of any regulatorylimitations prior to use.AWS B2.1-1-027:2011Page 2 of 15Standard Welding Procedure Specifi

42、cation (SWPS)Permission to reproduce for intra-company use only is granted by the American Welding SocietyLIMITATIONSThis procedure is not qualified for PWHT or Notch Toughness applications.WELDING PROCESSESWelding Processes: FCAW-S (Flux Cored Arc WeldingSelf-Shielded)Method of Application: Semiaut

43、omaticMode of Metal Transfer: Globular or Spray Transfer ModeBASE METALSBase Metal:1Carbon Steel, M-1 or P-1, Groups 1 and 2Thickness Range: 1/8 in through 1/2 in for groove and fillet weldsDiameter: Groove Welds: 4 in minimumFillet Welds: All DiametersCoating: UncoatedFILLER METALSFiller Metal Spec

44、ification:1AWS A5.20 or ASME SFA 5.20A Number: E71T-11F Number: F Number 6Classification: E71T-11Supplementary Filler Metal: Not PermittedSupplementary Powder: Not PermittedDeposit Thickness Range: 1/2 in maximum plus reinforcement for groove welds1/8 in through 1/2 in fillet weld size for fillet we

45、ldsJOINT DESIGNSJoint Designs: See Figure 1Backing: Required unless backgouged and back weldedBacking Material: Carbon Steel, M-1, P-1, Groups 1, 2, or 3 or weld metal of similarchemical analysis. Nonmetallic or nonfusing metal retainers are notpermitted.POSITIONSPermitted Positions: All PositionsVe

46、rtical Progression: Either Uphill or Downhill1M and P numbers for base metal and F and A numbers for filler metal and weld metal, respectively, are as detailed in AWSB2.1 and ASME Boiler and Pressure Vessel Code, Section IX.Standard Welding Procedure Specification (SWPS)AWS B2.1-1-027:2011Page 3 of

47、15Permission to reproduce for intra-company use only is granted by the American Welding SocietyPREHEAT AND INTERPASS TEMPERATUREPreheat Temperature:250F MinimumInterpass Temperature:250F Minimum, 500F MaximumPreheat Maintenance: During weldingELECTRICAL CHARACTERISTICSPulsing Current: Not permittedC

48、ontact Tube to Work Distance: 3/4 in 1/4 inTECHNIQUEWeave or Stringer Bead: EitherPeening: Not required; if used, proceed as permitted by the fabricationdocument(s).Initial Cleaning: Chemical or mechanical; joint shall be dry prior to weldingInterpass Cleaning: Mechanical onlyBackgouging: Mechanical

49、 or thermal when usedSingle or Multiple Passes: EitherMaximum Bead Thickness: 1/4 inRepair: Defects in welds shall be removed by mechanical or thermal meth-ods. The repair cavity may differ in contour and dimension from anormal joint preparation and may present different restraint condi-tions. Repair of base metal defects shall be in accordance with therequirements of the fabrication document(s).COMPANY NAME _In the name of the Company stated above, I accept full responsibility for the application of this SWPS

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1