1、 AWWA Standard SM Fabricated Composite Slide Gates Effective date: Dec. 1, 2014. First edition approved by AWWA Board of Directors June 13, 2004. This edition approved June 8, 2014. Approved by American National Standards Institute July 23, 2014. ANSI/AWWA C563-14 (Revision of ANSI/AWWA C563-12) Cop
2、yright 2015 American Water Works Association. All Rights Reserved. ii AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering and administrative information n
3、ormally contained in specifications. The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA pub- lication of a standard does not constitute endorsement of a
4、ny product or product type, nor does AWWA test, certify, or approve any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any applicable law, regulation, or code of any governmental authority. AWWA standards are intended to
5、 represent a consensus of the water supply industry that the product described will provide satisfactory service. When AWWA revises or withdraws this standard, an official notice of action will be placed in the Official Notice section of Journal - American Water Works Association. The action becomes
6、 effective on the first day of the month fol- lowing the month of Journal - American Water Works Association publication of the official notice. American National Standard An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An American Na
7、tional Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether that person has ap - proved the standard or not, from manufacturing, marketing, purchasing, or using p
8、roducts, processes, or procedures not conforming to the standard. American National Standards are subject to periodic review, and users are cautioned to obtain the latest editions. Producers of goods made in conformity with an American National Standard are encour - aged to state on their own respon
9、sibility in advertising and promotional materials or on tags or labels that the goods are produced in conformity with particular American National Standards. Caution n oti Ce : The American National Standards Institute (ANSI) approval date on the front cover of this standard indicates completion of
10、the ANSI approval process. This American National Standard may be revised or withdrawn at any time. ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of ANSI approval. Purchasers of American National Standards may recei
11、ve current information on all standards by calling or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036; 212.642.4900, or emailing infoansi.org. ISBN-13, print: 978-1-62576-042-5 eISBN-13, electronic: 978-1-61300-306-0DOI: http:/dx.doi.org/10.12
12、999/AWWA.C563.14 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information or retrieval system, except in the form of brief excerpts or quotations for review purposes, wi
13、thout the written permission of the publisher. Copyright 2014 by American Water Works Association Printed in USA hours of work by your fellow water professionals. Revenue from the sales of this AWWA material supports ongoing product development. Unauthorized distribution, either electronic or photoc
14、opied, is illegal and hinders AWWAs mission to support the water community. This AWWA content is the product of thousands of Copyright 2015 American Water Works Association. All Rights Reserved. iii Committee Personnel The AWWA Subcommittee for C563, Fabricated Composite Slide Gates, which developed
15、 this standard, had the following personnel at the time of approval: Harry J. Reed, Chair G. Darin, Rodney Hunt-Fontaine Inc., Bedford, N.H. (AWWA) C. Gamble, Whipps Inc., Athol, Mass. (AWWA) D. Niblett, JASH USA, Weldon Spring, Mo. (AWWA) J. Weber, MWRDGC, Chicago, Ill. (AWWA) M. Larrea, ORBINOX Va
16、lves International, San Sebastian, Guipuzcoa, Spain (AWWA) R.M. Scott, Pelham, Mass. (AWWA) D. Thomas, Ashbrook Simon-Hartley Operations LP, Houston, Texas (AWWA) H.J. Reed, Plasti-Fab Inc., Tualatin, Ore. (AWWA) The AWWA Standards Committee on Slide Gates, which reviewed and approved this standard,
17、 had the following personnel at the time of approval: Kirk H. Hipps, Chair General Interest Members A. Ali, ADA Consulting, Surrey, B.C., Canada (AWWA) S. Barraco, AECOM, Dallas, Texas (AWWA) M.D. Bennett, MWH Global, Cleveland, Ohio (AWWA) D.M. Flancher,* Standards Engineer Liaison, AWWA, Denver, C
18、olo. (AWWA) L.C. Gerbig, Lee C. Gerbig LLC, Avon, Ind. (AWWA) B. Hasanbadi, CH2M HILL, Redding, Calif. (AWWA) K.H. Hipps, CDM Smith, Chicago, Ill. (AWWA) J.E. Koch, HDR Engineering Inc., La Conner, Wash. (AWWA) L. Thomas,* Standards Council Liaison, Crystal Lake, Ill. (AWWA) Producer Members P.E. Br
19、unelle, Rodney Hunt-Fontaine Inc., Orange, Mass. (AWWA) * Liaison, nonvoting Copyright 2015 American Water Works Association. All Rights Reserved. iv S. Lamb, *Nickel Institute, Huntington, W. Va. (AWWA) R. Niedzwiecki, Whipps Inc., Athol, Mass. (AWWA) D. Niblett, JASH USA, Weldon Spring, Mo. (AWWA)
20、 D.R. Pauls, Waterman Industries, Exeter, Calif. (AWWA) D. Thomas, Ashbrook Simon-Hartley Operations LP, Houston, Texas (AWWA) G.E. Whipps, Whipps Inc., Athol, Mass. (AWWA) User Members R.J. Alberts, Pasco, Wash. (AWWA) M.R. Johnson, Upper Blackstone Water Pollution Abatement District, Millbury, Mas
21、s. (AWWA) H.C. Suan, Edmonton Public Works, Edmonton, Alta., Canada (AWWA) J. Weber, MWRDGC, Chicago, Ill. (AWWA) * Alternate Copyright 2015 American Water Works Association. All Rights Reserved. v Contents All AWWA standards follow the general format indicated subsequently. Some variations from thi
22、s format may be found in a particular standard. SEC. PAGE SEC. PAGE Foreword I Introduction vii I.A Background . vii I.B History . viii I.C Acceptance . viii II Special Issues ix III Use of This Standard . x III.A Purchaser Options and Alternatives . x III.B Modification to Standard . xi IV Major Re
23、visions xi V Comments . xi Standard 1 General 1.1 Scope 1 1.2 Purpose . 1 1.3 Application 1 2 References 2 3 Definitions . 4 4 Requirements 4.1 Data to Be Provided by the Supplier . 5 4.2 Data to Be Provided by the Manufacturer 5 4.3 Materials . 6 4.4 General Design . 9 4.5 Manufacture . 18 4.6 Inst
24、allation 19 5 Verification 5.1 Inspection . 20 5.2 Test Procedures . 20 6 Delivery 6.1 Marking 21 6.2 Shipment . 21 6.3 Affidavit of Compliance 21 Appendix A Force Required to Actuate Fabricated Composite Gates 23 Table 1 Material properties 7 Copyright 2015 American Water Works Association. All Rig
25、hts Reserved. This page intentionally blank. Copyright 2015 American Water Works Association. All Rights Reserved. vii Foreword This foreword is for information only and is not a part of ANSI*/AWWA C563. I. Introduction. I.A. Background. A fabricated composite slide gate is a vertically sliding gate
26、 with fiberglass-reinforced composite-plastic or rigid compressed-plastic slides and frames of either fiberglass-reinforced composite plastic, stainless steel, or coated carbon steel, with ultra-high-molecular-weight polyethylene (UHMW-PE) seating faces and seals or UHMW-PE seating faces and resilie
27、nt rubber seals. Examples of where this type of gate is used include the control of water and wastewater through orifice openings in walls, at the ends of pipes, at the ends of open-top channels or within open-top channels, and controlling flow at openings in tank walls. Downward-opening gates act a
28、s weir gates. Slide gates are raised and lowered by means of a stem or rod using a manually operated screw stem hoist, an electrically driven screw stem hoist, or by a hydraulic or pneumatic cylinder. Gates are mounted directly to concrete walls with anchor bolts, grouted into blockouts within concr
29、ete channel walls, or bolted to a pipe flange or wall thimble. Another term used to describe slide gates is sluice gates. The term slide gate has been adopted for use by this series of standards, which supersede ANSI/AWWA C501-92. The standards are ANSI/AWWA C560Cast-Iron Slide Gates ANSI/AWWA C561F
30、abricated Stainless-Steel Slide Gates ANSI/AWWA C562Fabricated Aluminum Slide Gates ANSI/AWWA C563Fabricated Composite Slide Gates The slide gates represented by ANSI/AWWA C560 through ANSI/AWWA C563 differ in material and means of sealing between the slide and the fixed frame as described below. AN
31、SI/AWWA C560 gates have a cast-iron or cast-ductile-iron slide and frame with machined metal seating faces and wedges to force the slide to seal between the seating faces on the slide and frame. ANSI/AWWA C561 gates have a fabricated, reinforced stainless-steel slide and frame with UHMW-PE seating f
32、aces and seals or UHMW-PE seating faces and resil- ient rubber seals. * American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036. Copyright 2015 American Water Works Association. All Rights Reserved. viii ANSI/AWWA C562 gates have a fabricated, reinforced aluminum
33、 slide and a frame with UHMW-PE seating faces and seals or UHMW-PE seating faces and resil- ient rubber seals. ANSI/AWWA C563 gates have a fiberglass-reinforced composite-plastic or rigid compressed plastic slides and frame of either fiberglass-reinforced composite-plastic stainless steel or coated
34、carbon steel, with UHMW-PE seating faces and seals or UHMW-PE faces and resilient rubber seals. I.B. History. The original AWWA standard for slide gates (then referred to as sluice gates) was approved as tentative on June 26, 1941, and described cast-iron gates. The tentative standard was revised an
35、d approved on June 4, 1967, as AWWA C501. Subsequent editions were approved in January 1980, June 1987, and June 1992. Following the latest revision, the Standards Council authorized the development of additional standards for slide gates to recognize the widespread use of slide gates similar to ANS
36、I/AWWA C501 gates in performance but manufactured by different methods and of different materials. For consistency among the new standards and recognizing the new designs employed, the Standards Council directed that each of the standards use the name slide gate in lieu of the term sluice gate. The
37、Standards Council also directed that ANSI/AWWA C501 be redesignated ANSI/AWWA C560, with subsequent slide-gate standards numbered consecutively. The first edition of ANSI/ AWWA C563, Fabricated Composite Slide Gates, was approved on June 13, 2004. The second edition was approved on Jan. 22, 2012. Th
38、is third edition was approved June 8, 2014. I.C. Acceptance. In May 1985, the US Environmental Protection Agency (USEPA) entered into a cooperative agreement with a consortium led by NSF International (NSF) to develop voluntary third-party consensus standards and a certification program for direct a
39、nd indirect drinking water additives. Other members of the original consortium included the Water Research Foundation (formerly AwwaRF) and the Conference of State Health and Environmental Managers (COSHEM). The American Water Works Association and the Association of State Drinking Water Administrat
40、ors (ASDWA) joined later. In the United States, authority to regulate products for use in, or in contact with, drinking water rests with individual states.* Local agencies may choose to impose requirements more stringent than those required by the state. To evaluate the health * Persons outside the
41、United States should contact the appropriate authority having jurisdiction. Copyright 2015 American Water Works Association. All Rights Reserved. ix effects of products and drinking water additives from such products, state and local agencies may use various references, including 1. An advisory prog
42、ram formerly administered by USEPA, Office of Drinking Water, discontinued on Apr. 7, 1990. 2. Specific policies of the state or local agency. 3. Two standards developed under the direction of NSF:* NSF/ANSI 60, Drinking Water Treatment ChemicalsHealth Effects; and NSF/ANSI 61, Drinking Water System
43、 ComponentsHealth Effects. 4. Other references, including AWWA standards, Food Chemicals Codex, Water Chemicals Codex, and other standards considered appropriate by the state or local agency. Various certification organizations may be involved in certifying products in accor- dance with NSF/ANSI 61.
44、 Individual states or local agencies have authority to accept or accredit certification organizations within their jurisdictions. Accreditation of certi- fication organizations may vary from jurisdiction to jurisdiction. Annex A, “Toxicology Review and Evaluation Procedures,” to NSF/ANSI 61 does not
45、 stipulate a maximum allowable level (MAL) of a contaminant for substances not regulated by a USEPA final maximum contaminant level (MCL). The MALs of an unspecified list of “unregulated contaminants” are based on toxicity testing guidelines (noncarcinogens) and risk characterization methodology (ca
46、rcinogens). Use of Annex A procedures may not always be identical, depending on the certifier. ANSI/AWWA C563 does not address additives requirements. Thus, users of this standard should consult the appropriate state or local agency having jurisdiction in order to 1. Determine additive requirements,
47、 including applicable standards. 2. Determine the status of certifications by parties offering to certify products for contact with, or treatment of, drinking water. 3. Determine current information on product certification. II. Special Issues. This standard has no applicable information for this se
48、ction. * NSF International, 789 North Dixboro Road, Ann Arbor, MI 48105. American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036. Both publications available from National Academy of Sciences, 500 Fifth Street, NW, Washington, DC 20001. Copyright 2015 American Wa
49、ter Works Association. All Rights Reserved. x III. Use of This Standard. It is the responsibility of the user of an AWWA standard to determine that the products described in that standard are suitable for use in the particular application being considered. III.A. Purchaser Options and Alternatives. The following items should be provided by the purchaser: 1. Standard usedthat is, ANSI/AWWA C563, Fabricated Composite Slide Gates, of latest revision. 2. Whether compliance with NSF/ANSI 61, Drinking Water System ComponentsHealth Effects, is required.
