ANSI AWWA D103-2009 Factory-Coated Bolted Carbon Steel Tanks for Water Storage (Incorporates addenda dated November 2014)《储水用加工涂覆螺栓连接钢罐》.pdf

上传人:cleanass300 文档编号:434123 上传时间:2018-11-11 格式:PDF 页数:136 大小:12.49MB
下载 相关 举报
ANSI AWWA D103-2009 Factory-Coated Bolted Carbon Steel Tanks for Water Storage (Incorporates addenda dated November 2014)《储水用加工涂覆螺栓连接钢罐》.pdf_第1页
第1页 / 共136页
ANSI AWWA D103-2009 Factory-Coated Bolted Carbon Steel Tanks for Water Storage (Incorporates addenda dated November 2014)《储水用加工涂覆螺栓连接钢罐》.pdf_第2页
第2页 / 共136页
ANSI AWWA D103-2009 Factory-Coated Bolted Carbon Steel Tanks for Water Storage (Incorporates addenda dated November 2014)《储水用加工涂覆螺栓连接钢罐》.pdf_第3页
第3页 / 共136页
ANSI AWWA D103-2009 Factory-Coated Bolted Carbon Steel Tanks for Water Storage (Incorporates addenda dated November 2014)《储水用加工涂覆螺栓连接钢罐》.pdf_第4页
第4页 / 共136页
ANSI AWWA D103-2009 Factory-Coated Bolted Carbon Steel Tanks for Water Storage (Incorporates addenda dated November 2014)《储水用加工涂覆螺栓连接钢罐》.pdf_第5页
第5页 / 共136页
点击查看更多>>
资源描述

1、ANSI/AWWA D103-09 (Revision of AWWA D103-97) AWWA Standard Effective date: Nov. 1, 2009. First edition approved by AWWA Board of Directors Jan. 28, 1980. This edition approved Jan. 25, 2009. Approved by American National Standards Institute Sept. 11, 2009. 6666 West Quincy Avenue Advocacy Denver, CO

2、 80235-3098 Communications T 800.926.7337 Conferences www.awwa.org Education and TrainingScience and TechnologySections The Authoritative Resource on Safe Water Factory-Coated Bolted Carbon Steel Tanks for Water Storage Incorporates errata dated Oct. 2010.Incorporates addenda dated Nov. 2014. hours

3、of work by your fellow water professionals. Revenue from the sales of this AWWA material supports ongoing product development. Unauthorized distribution, either electronic or photocopied, is illegal and hinders AWWAs mission to support the water community. This AWWA content is the product of thousan

4、ds of ii AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering and administrative information normally contained in specifi- cations. The AWWA standards usu

5、ally contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA publication of a standard does not constitute endorsement of any product or product type, nor does AWWA test, certify, or a

6、pprove any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any applicable law, regulation, or codes of any governmental authority. AWWA standards are intended to represent a consensus of the water supply industry that the

7、 product described will provide satisfactory service. When AWWA revises or withdraws this standard, an official notice of action will be placed on the first page of the classified advertising section of Journal AWWA. The action becomes effective on the first day of the month following the month of J

8、ournal AWWA publication of the official notice. American National Standard An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An Ameri- can National Standard is intended as a guide to aid the manufacturer, the consumer, and the general p

9、ublic. The existence of an American National Standard does not in any respect preclude anyone, whether that person has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standard. American National Standards are

10、subject to periodic review, and users are cautioned to obtain the latest editions. Producers of goods made in conformity with an American National Standard are encouraged to state on their own responsibility in advertis- ing and promotional materials or on tags or labels that the goods are produced

11、in conformity with particular American National Standards. Caution n oti Ce : The American National Standards Institute (ANSI) approval date on the front cover of this standard indicates completion of the ANSI approval process. This American National Standard may be revised or withdrawn at any time.

12、 ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of publication. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institu

13、te, 25 West 43rd Street, Fourth Floor, New York, NY 10036; (212) 642-4900. ISBN-13, print: 978-1-58321-937-9 eISBN-13, electronic: 978-1-61300-230-8 ISBN-10, print: 1-58321-937-4 eISBN-10, electronic: 1-61300-230-0 All rights reserved. No part of this publication may be reproduced or transmitted in

14、any form or by any means, electronic or mechanical, including photocopy, recording, or any information or retrieval system, except in the form of brief excerpts or quotations for review purposes, without the written permission of the publisher. Copyright 2009 by American Water Works Association Prin

15、ted in USA iii Committee Personnel The D103 Revision Task Force, which developed this standard, had the following personnel at the time: Keith McGuire, Chair General Interest Members D.B. Harrison, Associated Engineering (B.C.) Ltd., Comox, B.C. (AWWA) S.W. Meier, Tank Industry Consultants, Indianap

16、olis, Ind. (AWWA) Producer Members R.V.D. Field, Engineered Storage Products Company, DeKalb, Ill. (AWWA) C. Margolf, TEMCOR, Gardena, Calif. (AWWA) J.E. Marquez, Superior Tank Company Inc., Rancho Cucamonga, Calif. (AWWA) K. McGuire, Columbian TecTank Inc., Parsons, Kan. (AWWA) B. Rumple, Columbian

17、 TecTank Inc., Kansas City, Kan. (AWWA) L.D. Scott, CB&I Constructors Inc., Atascadero, Calif. (AWWA) J. Staat, Conservatek Industries, Conroe, Texas (AWWA) The A WWA Standards Committee on Steel Elevated Tanks, Standpipes, and Reservoirs, which reviewed and approved this standard, had the following

18、 personnel at the time of approval: Stephen W. Meier, Chair General Interest Members E. Darrimon, Bay Area Coating Consultant Service Inc., Denair, Calif. (AWWA) W.J. Dixon, Dixon Engineering Inc., Lake Odessa, Mich. (AWWA) F.S. Kurtz, *Standards Engineer Liaison, AWWA, Denver, Colo. (AWWA) S.W. Mei

19、er, Tank Industry Consultants, Indianapolis, Ind. (AWWA) B.M. Shepherd, *Standards Council Liaison, Metro Water District of Southern California, La Verne, Calif. (AWWA) J.I. Strand, Short Elliott Hendrickson Inc., Chippewa Falls, Wis. (AWWA) C.C. Sundberg, CH2M HILL Inc., Issaquah, Wash. (AWWA) * Li

20、aison, nonvoting iv J.H. Wilber, American AVK, Littleton, Colo. (AWWA) R.S. Wozniak, Bow Tech Ltd., Batavia, Ill. (AWWA) Producer Members J.W. Davis, TNEMEC Company, Kansas City, Mo. (AWWA) B.E. Kromer, Tank Builders Inc., Euless, Texas (AWWA) S. Lamb, Nickel Development Institute, Huntington, W.V.

21、(AWWA) G.A. Larson, CB&I Constructors Inc., Clive, Iowa (AWWA) K. McGuire, Columbian TecTank Inc., Parsons, Kan. (AWWA) L.D. Scott, *CB&I Constructors Inc., Atascadero, Calif. (AWWA) D.L. Stilger, Caldwell Tanks Inc., Louisville, Ky. (AWWA) User Members C.P. Harder, City of Fort Worth, Fort Worth, T

22、exas (AWWA) E.J. King, Connecticut Water Co., Clinton, Conn. (AWWA) J.L. Ortiz, San Francisco Public Utilities Commission, San Francisco, Calif. (AWWA) J.P. Scott, New JerseyAmerican Water Company, Delran, N.J. (AWWA) D.T. Wagner, EBMUD, Oakland, Calif. (AWWA) * Alternate v Contents All AWWA standar

23、ds follow the general format indicated subsequently. Some variations from this format may be found in a particular standard. Foreword I Introduction . xi I.A Background xi I.B History . xi I.C Acceptance . xi II Special Issues . xii II.A Purchase xii II.B Design and Construction xii II.C Coatings .

24、xiii II.D Foundations . xiii II.E Annual Inspection, Maintenance, and Operation xiii II.F Disinfection Procedures and Cathodic Protection . xiii III Use of This Standard xiv III.A Purchaser Options and Alternatives xiv III.B Information to Be Provided With the Bid xvi III.C Modification to Standard

25、. xvi IV Major Revisions xvi V Comments xvii Standard 1 General 1.1 Scope 1 1.2 Drawings to Be Provided . 2 2 References 2 3 Definitions . 6 4 Materials 4.1 General . 7 4.2 Bolts, Nuts, and Anchor Bolts . 7 4.3 Foundation-Reinforcing Steel 7 4.4 Plates and Sheets . 7 4.5 Structural Shapes 8 4.6 Cast

26、ings 9 4.7 Forgings 9 4.8 Electrodes 9 4.9 Pipe and Fittings for Fluid Conductors . 9 4.10 Gaskets and Sealants . 10 5 General Design 5.1 Types of Joints . 11 5.2 Design Loads 11 5.3 Design Criteria 12 5.4 Tank Shell . 13 5.5 Bolted Joints 14 5.6 Weld Design . 16 5.7 Roof Supports . 16 5.8 Steel Thi

27、ckness 17 5.9 Foundation Anchor Bolts 18 5.10 Reinforcement Around Openings 21 5.11 Equivalent Metric Equations . 22 6 Sizing of Tanks 6.1 Standard Capacities, Diameters, and Heights . 23 SEC. PAGESEC. PAGE vi 7 Accessories for Tanks 7.1 Shell Manholes 23 7.2 Pipe Connections 23 7.3 Overflow . 24 7.

28、4 Ladders . 24 7.5 Safety Devices . 25 7.6 Roof Openings 25 7.7 Vent 25 7.8 Galvanic Corrosion . 26 8 Welding 8.1 General . 26 8.2 Welds 26 8.3 Preparation of Surfaces to Be Welded . 28 8.4 Undercuts and Penetration of Welds 28 8.5 Cleaning of Welds . 28 9 Shop Fabrication 9.1 Straightening . 28 9.2

29、 Finish of Plate and Sheet Edges . 29 9.3 Rolling 29 9.4 Forming 29 9.5 Manufacturing Tolerances . 29 9.6 Coatings 29 9.7 Shipping 29 10 Erection 10.1 General . 30 10.2 Bolting 30 10.3 Gasketing and Sealants . 30 10.4 Coating Repair 30 10.5 Cleanup 30 11 Inspection and Testing 11.1 Shop Inspection 3

30、0 11.2 Testing 31 11.3 Disinfecting 31 12 Coatings 12.1 General . 31 12.2 Coating Repair 31 12.3 Galvanized Coatings . 31 12.4 Glass Coatings 32 12.5 Thermoset Liquid Suspension Coatings 32 12.6 Thermoset P owder Coatings 33 12.7 Marking 34 12.8 Protection 34 12.9 Holiday Testing . 34 13 Foundation

31、Design and Construction 13.1 General Requirements . 34 13.2 Geotechnical . 35 13.3 Safety Factors 35 13.4 Foundation Types 36 13.5 Foundation Design Details 38 13.6 Concrete Design, Materials, and Construction 39 13.7 Backfill 39 14 Seismic Design 14.1 General . 40 14.2 Design Earthquake Ground Moti

32、on . 41 14.3 Seismic Design Loads 77 14.4 Piping Connections . 88 14.5 Foundation Considerations . 89 14.6 Equivalent Metric Equations . 90 SEC. PAGESEC. PAGE vii 15 Wind Design 15.1 Wind Pressure . 91 15.2 Anchor Check . 98 15.3 Sliding Check 98 15.4 Top and Intermediate Shell Girders 99 15.5 Tensi

33、le Straps 101 15.6 Equivalent Metric Equations . 101 Appendix A Commentary for Factory-Coated Bolted Carbon Steel Tanks for Water Storage A.1 General . 103 A.2 References . 103 A.4 Materials . 104 A.5 General Design . 104 A.7 Accessories for Tanks . 106 A.11 Inspection and Testing 107 A.13 Foundatio

34、n Design and Construction . 107 A.14 Seismic Design 108 A.15 Wind Design of Flat-Bottom Water Storage Tanks . 116 A.16 Structurally Supported Aluminum Dome Roofs 117 Figures 1 Extreme Frost PenetrationInches 38 2 Recommended Depth of Pipe CoverFeet Above Top of Pipe . 40 3 Mapped Maximum Considered

35、Earthquake Spectral Response Acceleration, 5 Percent Damped, at 0.2-Sec Period S Sfor Site Class B for the Conterminous United States 44 4 Mapped Maximum Considered Earthquake Spectral Response Acceleration, 5 Percent Damped, at 1-Sec Period S 1for Site Class B for the Conterminous United States 46

36、5 Mapped Maximum Considered Earthquake Spectral Response Acceleration, 5 Percent Damped, at 0.2-Sec Period S Sfor Site Class B for Region 1 48 6 Mapped Maximum Considered Earthquake Spectral Response Acceleration, 5 Percent Damped, at 1-Sec Period S 1for Site Class B for Region 1 50 7 Mapped Maximum

37、 Considered Earthquake Spectral Response Acceleration, 5 Percent Damped, at 0.2-Sec Period S Sfor Site Class B for Region 2 52 8 Mapped Maximum Considered Earthquake Spectral Response Acceleration, 5 Percent Damped, at 1-Sec Period S 1for Site Class B for Region 2 53 9 Mapped Maximum Considered Eart

38、hquake Spectral Response Acceleration, 5 Percent Damped, at 0.2-Sec Period S Sfor Site Class B for Region 3 54 10 Mapped Maximum Considered Earthquake Spectral Response Acceleration, 5 Percent Damped, at 1-Sec Period S 1for Site Class B for Region 3 55 SEC. PAGESEC. PAGE viii 11 Mapped Maximum Consi

39、dered Earthquake Spectral Response Acceleration, 5 Percent Damped, at 0.2-Sec Period S Sand 1-Sec Period S 1for Site Class B for Region 4 56 12 Mapped Maximum Considered Earthquake Spectral Response Acceleration, 5 Percent Damped, at 0.2-Sec Period S Sand 1-Sec Period S 1for Site Class B for Hawaii

40、. 57 13 Mapped Maximum Considered Earthquake Spectral Response Acceleration, 5 Percent Damped, at 0.2-Sec Period S Sfor Site Class B for Alaska . 58 14 Mapped Maximum Considered Earthquake Spectral Response Acceleration, 5 Percent Damped, at 1-Sec Period S 1for Site Class B for Alaska . 59 15 Mapped

41、 Maximum Considered Earthquake Spectral Response Acceleration, 5 Percent Damped, at 0.2-Sec Period S Sand 1-Sec Period S 1for Site Class B for Puerto Rico, Culebra, Vieques, St. Thomas, St. John, and St. Croix 60 16 Mapped Maximum Considered Earthquake Spectral Response Acceleration, 5 Percent Dampe

42、d, at 0.2-Sec Period S Sand 1-Sec Period S 1for Site Class B for Guam and Tutuilla 61 17 Region-Dependent Transition Period for Longer-Period Ground Motion T L. 66 18 Deterministic Lower Limit for Maximum Considered Earthquake Ground Motion . 72 19 Bottom Piping Connection of a Self-Anchored Tank Wi

43、th Steel Bottom . 89 20 Basic Wind Speed V 93 A1 Design Response SpectraGeneral Procedure 111 A2 Design Spectral Response Acceleration That Causes the Tank to Slide S ai , slide. 112 A3 Curve for Obtaining Factor K pfor the Ratio D/H . 113 A4 Curves for Obtaining Factors W i /W Tand W c /W Tfor the

44、Ratio D/H . 114 A5 Curves for Obtaining Factors X i /H and X c /H for the Ratio D/H 114 A6 Pressure-Stabilizing Buckling Coefficient DC cfor Self-Anchored Tanks . 115 Tables 1 Physical Requirements for Gasket Material . 10 2 Seismic Importance Factor I E42 3 Site Class Definitions 43 4 Short-Period

45、Site Coefficient F a64 5 Long-Period Site Coefficient F v . 64 6 Response Modification Factors R iand R c. 65 SEC. PAGESEC. PAGE ix 7 Minimum Freeboard Requirements 86 8 Minimum Design Displacements for Piping Attachments 88 9 Force Coefficient C f. 92 10 Velocity Pressure Exposure Coefficient K z92

46、 A1 Seismic Use Group 109 This page intentionally blank. xi This foreword is for information only and is not a part of ANSI/AWWA D103. I. Introduction. I.A. Background. This standard covers factory-coated bolted steel tanks for water storage and is based on the accumulated knowledge and experience o

47、f manufacturers of bolted steel tanks. * I.B. History. The first version of this standard was prepared in cooperation with the Bolted Tank Manufacturers Association and was issued in 1980. It was prepared in response to the increasing use of bolted tanks for water storage. AWWA D103-80 was later upd

48、ated and approved as AWWA D103-87 on June 14, 1987. The third edition of ANSI/AWWA D103-97 was approved by the AWWA Board of Directors on June 15, 1997. The fourth and current edition of ANSI/AWWA D103 was approved on Jan. 25, 2009. I.C. Acceptance. In May 1985, the US Environmental Protection Agenc

49、y (USEPA) entered into a cooperative agreement with a consortium led by NSF International (NSF) to develop voluntary third-party consensus standards and a certification program for all direct and indirect drinking water additives. Other members of the original consortium included the American Water Works Association Research Foundation (AwwaRF) and the Conference of State Health and Environmental Managers (COSHEM). The American Water Works Association (AWWA) and the Association of State Drinking Water Administrators (ASDWA) joined later. In the United State

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1