1、Hand-held motor-operated electric tools Safety Part2-5: Particular requirements for circular sawsCAN/CSA-C22.2 No. 60745-2-5-12(IEC 60745-2-5:2010, MOD)National Standard of CanadaNOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE.Legal Notice for StandardsCanadian Standards Association (CSA) standard
2、s are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules
3、to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitatio
4、n, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in th
5、is document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, I
6、NDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENC
7、E), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render
8、 professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts
9、 no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with th
10、e contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyri
11、ght, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modificatio
12、n, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all
13、 intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advi
14、sed that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document
15、 is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to hav
16、e such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this
17、document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your accep
18、tance of the terms and conditions of this Legal Notice.CSA Standards Update ServiceCAN/CSA-C22.2 No. 60745-2-5-12March 2012Title:Hand-held motor-operated electric tools Safety Part2-5: Particular requirements for circular sawsPagination:68 pagesTo register for e-mail notification about any updates t
19、o this publicationgo on-line to shop.csa.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2421746.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs po
20、licy on privacy at csagroup.org/legal to find out how we protect your personal information.The Canadian Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system
21、 in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification activities. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and
22、governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associatio
23、ns across Canada indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs
24、 total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standards development activities. The Association offers certification and testing services in support of and as an extension to its standards development activities. To ensure t
25、he integrity of its certification process, the Association regularly and continually audits and inspects products that bear the CSA Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agenci
26、es in eight countries. Since 1919, the Association has developed the necessary expertise to meet its corporate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of
27、 standards, certification and related services to meet national and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada (SCC) is thecoordinating body of the N
28、ational StandardsSystem, a coalition of independent, autonomousorganizations working towards the furtherdevelopment and improvement of voluntarystandardization in the national interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof advancing the nati
29、onal economy, benefiting thehealth, safety, and welfare of the public, assistingand protecting the consumer, facilitating domesticand international trade, and furthering internationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or reviewed by an acc
30、redited Standards Development Organization (SDO) and approved by the SCC according to the requirements of CAN-P-2. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals w
31、hose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of
32、 making a significant and timely contribution to the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO which publishes the standard.The responsibili
33、ty for approving standards as National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is stated in i
34、ts Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationCanadian Standards AssociationCAN/CSA-C22.2 No. 60745-2-5-12Fourth Edition(IEC 60745-2-5:2010 MOD)Underwriters
35、 Laboratories Inc.UL 60745-2-5Fifth EditionHand-Held Motor-Operated Electric Tools Safety Part 2-5:Particular Requirements for Circular SawsMarch 20, 2012This national standard is based on publication IEC 60745-2-5, Fifth Edition (2010).ANSI/UL 60745-2-5-2012Commitment for AmendmentsThis standard is
36、 issued jointly by the Canadian Standards Association (CSA) and UnderwritersLaboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may besubmitted to CSA or UL at anytime. Revisions to this standard will be made only after processingaccording to the standards develop
37、ment procedures of CSA and UL. CSA and UL will issue revisionsto this standard by means of a new edition or revised or additional pages bearing their date of issue.ISBN 978-1-55491-875-1 2012 Canadian Standards AssociationAll rights reserved. No part of this publication may be reproduced in any form
38、 whatsoever without theprior permission of the publisher.CSA Standards are subject to periodic review, and suggestions for their improvement will be referredto the appropriate committee. To submit a proposal for change to CSA Standards, please send thefollowing information to inquirescsa.ca and incl
39、ude Proposal for change in the subject line:Standard designation (number); relevant clause, table, and/or figure number; wording of the proposedchange; and rationale for the change.To purchase CSA Standards and related publications, visit CSAs Online Store at shop.csa.ca or calltoll-free 1-800-463-6
40、727 or 416-747-4044.Copyright 2012 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standardshould be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the
41、sole and exclusive property of UL.The most recent designation of ANSI/UL 60745-2-5 as an American National Standard (ANSI) occurredon March 20, 2012. ANSI approval for a standard does not include the Cover Page, Transmittal Pages,Title Page (front and back), or the Preface. The National Difference P
42、age and IEC Foreword are alsoexcluded from the ANSI approval of IEC-based standards.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative StandardsDevelopment System (CSDS)
43、at http:/.To purchase UL Standards, visit Comm 2000 at http:/m- call toll-free 1-888-853-3503.CONTENTSPreface .5NATIONAL DIFFERENCES .7FOREWORD 81 Scope 112 Normative references .113 Terms and definitions 114 General requirements 125 General conditions for the tests 126 Void 127 Classification 128 M
44、arking and instructions 128.12.1.101.1 Safety instructions for all saws 138.12.1.101.2 Further safety instructions for all saws .148.12.1.101.3 Safety instructions for saws shown in Figures 101, 102, and 103 .158.12.1.101.4 Safety instructions for saws shown in Figure 104 .158.12.1.101.5 Additional
45、safety instructions for all saws with riving knife 169 Protection against access to live parts 1710 Starting 1711 Input and current .1712 Heating 1713 Leakage current 1714 Moisture resistance .1715 Electric strength 1716 Overload protection of transformers and associated circuits 1717 Endurance .171
46、8 Abnormal operation .2019 Mechanical hazards .2019.101 Guarding above the base plate 2119.102 Guarding below the base plate 2419.103 Base plate 2519.104 Flanges .2619.105 Handles .2619.106 Blade changing 2620 Mechanical strength .2621 Construction .2722 Internal wiring 2723 Components .2724 Supply
47、connection and external flexible cords 2825 Terminals for external conductors .2826 Provision for earthing 2827 Screws and connections .2828 Creepage distances, clearances and distances through insulation 2829 Resistance to heat, fire and tracking 2830 Resistance to rusting 2831 Radiation, toxicity
48、and similar hazards .28MARCH 20, 2012 CAN/CSA-C22.2 NO. 60745-2-5-12 UL 60745-2-5 3AnnexesAnnex K (normative) Battery tools and battery packsAnnex L (normative) Battery tools and battery packs provided with mains connection ornon-isolated sourcesAnnex M (normative) Safety of working stands for opera
49、tion with hand-held motor-operatedelectric toolsM.1 Scope 45M.3 Terms and definitions 45M.8 Marking and instructions 45M.19 Mechanical hazards .47M.19.1.301 Guarding below the table top 47M.19.1.302 Guarding above the table top 47M.19.1.303 Riving knife 49M.19.1.304 Table top 50M.19.1.305 Workpiece guiding 51M.20 Mechanical strength 53M.21 Construction .54Annex AA (normative) Additional requirements for saws with a riving knifeAA.19 Mechanical hazards .62AA.20 Mechanical strength .63Annex BB (normative)
