1、ANSI Z21.50-2016 CSA 2.22-2016Vented decorative gas appliancesLegal Notice for StandardsCanadian Standards Association and CSA America, Inc. (operating as “CSA Group”) develop standards thro ugh a consensus standards development pro cess approved by the Standards Council of Canada and the American N
2、ational Standards Institut e. This process brings together volunteer s representing varied viewpoints and interes ts to achieve consensus and develop a standard. Although CSA Group administ ers the process and est ablishes rules to pro mote fairness in achieving consensus, it does not independently
3、tes t, evaluat e, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is pro vided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this document s fitn
4、ess for a particular purpose or use, its merchantability , or its non-infringement of any third party s intellectual pro perty rights. CSA Group does not warrant the accuracy , complet eness, or currency of any of the information published in this document. CSA Group makes no representations or warr
5、anties regarding this document s compliance with any applicable statut e, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LO
6、SS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARIS
7、ING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render pro fessional or other servic
8、es for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity . The information in this document is directed to those who have the appropriat e degree of experience to use and apply its conten ts, and CSA Group accepts no responsibility w
9、hatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA Group is a private not -for -profit company that publishes voluntary standards and related documents. CSA Group has no power , nor does it undertake, to enforce compliance with the cont
10、ents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in print ed or electronic form), CSA Group is the owner , or the authorized licensee, of all works contained herein that are pro tect ed
11、by copyright, all trade-marks (except as otherwise not ed to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are prot ected by patents and applications for patents. Without limitation, the unauthorized use,
12、modification, copying, or disclosure of this document may violate laws that pro tect CSA Groups and/or other s int ellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitt ed by licence
13、or by law , CSA Group reserves all int ellectual property rights in this document.Patent rightsAtt ention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights.
14、 Users of this st andard are expressly advised that determ ination of the validity of any such patent rights is entirely their own responsibility .Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only . The user of this document is
15、authorized to do only the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and bro wse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distribu
16、t ed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appear s on each such copy .In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document withou
17、t authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to de
18、str oy them immediately . Use of this document constitut es your acceptance of the terms and conditions of this Legal Notice.Revision HistoryANSI Z21.50-2016 CSA 2.22-2016, Vented decorative gas appliancesRevisions from seventh edition Revision symbol (in margin)Clauses 1.1 , 1.2 , 3, 4.1.21 , 4.1.2
19、2 , 4.1.23 , 4.7.12 , 4.7.13 , 4.9.5 , 4.10.15 , 4.12.1 , 4.14.4 , 4.16.4 , 4.17.4 , 4.19.1 , 4.19.2 , 4.20.1 , 4.20.8 , 4.20.9 , 4.24.3 , 4.24.4 , 4.27.2 , 4.27.3 , 4.27.4 , 4.28.2 , 4.28.3 , 4.28.7 , 5.1.1 , 5.1.15 , 5.2 , 5.3.4 , 5.5 , 5.7 , 5.9.7 , 5.10.1 , 5.10.5 , 5.12 , 5.12.1 , 5.12.2 , 5.12
20、.3 , 5.12.4 , 5.12.5 , 5.14.1 , 5.25.4 , 5.26.1 , 5.27.1 , 5.27.2 , 5.28.1 , 5.33 , 5.35.1 , 5.36.4 , 5.37 , 5.38 , 5.39.2 , 6.1 , 6.3 , 7.1.1 , 8.5 , 8.6 , A.1 , A.2 , B.1 , H.1.5 , H.1.7 , and H.2.3Annexes B , E , F , G , and JTable 6Figure 2Standards Update ServiceANSI Z21.50-2016 CSA 2.22-2016No
21、vember 2016Title: Vented decorative gas appliancesTo regist er for e-mail notification about any updat es to this publication go to shop.csa.ca click on CSA Updat e ServiceThe List ID that you will need to regist er for updat es to this publication is 2424090.If you require assista nce, please e-mai
22、l t echsupportcsagr oup.org or call 416-747-2233.Visit CSA Gr oups policy on privacy at www .csagr oup.org/legal to find out how we prot ect your per sonal information.CSA Group American National Standards InstituteThe Canadian Standards Association (operating as CSA Gr oup), under whose auspices th
23、is National Standard has been produced, was charte red in 1919 and accredit ed by the Standards Council of Canada to the National Standards sy st em in 1973. It is a not -for - pro fit, nons tatutory , voluntary membership association engaged in stan dards development and certification activities. C
24、SA Gr oup standards reflect a national consensus of pro ducers and user s including manufacturers, consumer s, retailer s, unions and profes sional organizations, and governmental agencies. The stan dards are used widely by indus try and commerce and oft en adopt ed by municipal, provincial, and fed
25、eral governments in their regulations, particularly in the fields of health, safety , building and cons truction, and the environm ent.Individuals, companies, and associations acro ss Canada indicate their support for CSA Gr oups stan dards development by volunte ering their time and skills to Commi
26、t tee work and supporting CSA Gr oups objectives through sustai ning member ships. The more than 7000 committ ee volunte ers and the 2000 sustai ning member ships together form CSA Gr oups total member ship fro m which its Directors are chosen. Sustai ning member ships represent a major source of in
27、come for CSA Gr oups stan dards development activities.CSA Gr oup offers certification and tes ting services in support of and as an ext ension to its stan dards development activities. To ensure the integri ty of its certification pr ocess, CSA Gr oup regularly and continually audits and inspects p
28、r oducts that bear the CSA Gr oup Mark.In addition to its head office and laboratory complex in Toronto, CSA Gr oup has regional branch offices in major centres acro ss Canada and inspection and te sting agencies in eight countries. Since 1919, CSA Gr oup has developed the necessary expertise to mee
29、t its corporat e mission: CSA Group is an independent service organization whose mission is to pr ovide an open and effective forum for activities facilitating the exchange of goods and services through the use of stan dards, certification and relat ed services to meet national and int ernational ne
30、eds.The American National Standards Ins titute (ANSI), Inc. is the nationally recognized coordinator of voluntary standards development in the United States thr ough which voluntary organizations, representing virtually every technical discipline and every facet of trade and commerce, organized labo
31、r and consumer int erests, establish and improve the some 10,000 national consensus stan dards currently approved as American National Standards. ANSI provides that the inter ests of the public may have appr opriate participation and representation in standardization activity , and cooperate s with
32、departments and agencies of U.S. Federal, stat e and local governments in achieving compatibility between government codes and standards and the voluntary standards of indus try and commerce.ANSI represents the inter est s of the Unit ed State s in international nontreaty organizations such as the I
33、nternational Organization for Standardization (ISO) and the Int ernational Electr otechnical Commission (IEC). The Institut e maintains close ties with regional organizations such as the Pacific Area Standards Congress (PASC) and the Pan American Standards Commission (COPANT). As such, ANSI coordina
34、te s the activities involved in the U.S. participation in these groups.ANSI approval of standards is intended to verify that the principles of openness and due process have been followed in the approval proce dure and that a consensus of those directly and mater ially affect ed by the stan dards has
35、 been achieved. ANSI coordination is intended to assist the voluntary sys te m to ensure that national standards needs are identified and met with a set of s tandards that are without conflict or unnecessary duplication in their requirements.For further information on CSA Gr oup services, writ e to
36、CSA Gr oup 178 Rexdale Boulevard, Toro nto, Ontario, Canada M9W 1R3Responsibility of approving American stan dards rest s with the American National Standards Ins titute, Inc. 25 West 43rd Street, Fourth floor New York, NY 10036ISBN 978-1-4883-0159-9 2016 CSA Group All rights reserved. No part of th
37、is publication may be reproduced in any form whatsoever without the prior permission of the publisher .Published in November 2016 by CSA Group A not -for-prof it privat e sect or organization 178 Re xdale Boulevard, Toront o, Ontario, Canada M9W 1R3 To purchase st andards and related publications, v
38、isit our Online Store at shop.csa.caor call to ll-free 1-800-463-6727 or 416-747-4044.A trademark of the Canadian Standards Association and CSA America Inc., operating as “CSA Group”American National Standards Institute, Inc.Interprovincial Gas Advisory CouncilApproved on Octo ber 31, 2016 by ANSIAp
39、proved on Sept ember 20, 2016 by IGACEffective in Canada December 1, 2018Vented decorative gas appliancesANSI Z21.50-2016 CSA 2.22-2016ANSI Z21.50-2016 CSA 2.22-2016Vented decorative gas appliancesNovember 2016 2016 CSA Group 1ContentsInt erpro vincial Gas Advisory Council 4Z21/83 Technical Committ
40、ee on Performance and Inst allation of Gas Burning Appliances and Relat ed Accessories 6CSA Technical Committ ee on Gas Appliances and Relate d Accessories 10Z21/CSA Joint Technical Subcommitt ee on Standards for Vent ed Gas-Fired Warm Air Heater s 12Preface 151 Scope 192 Reference publications 203
41、Definitions 234 Cons truction 344.1 General construc tion and assembly 344.2 Thickness of mater ials 374.3 Evaluation of combustion/venting side sealing mat erials 404.4 Glass fr onts 404.5 Combus tion air and ventilation 414.6 Accessibility 424.7 Main burner s 424.8 Primary air adjust ment means 43
42、4.9 Orifice spuds and orifice fit tings 444.10 Automatic gas ignition s ys tems 454.11 Ignition of pilot 474.12 Appliance main gas valves 474.13 Gas supply lines 484.14 Bleeds and vents 514.15 Thermos tats 524.16 Automatic valves 524.17 Gas appliance pressure regulator s 524.18 Pilot gas filt ers 53
43、4.19 Fan and limit controls 534.20 Vent -air intake pipes 544.21 Venting (other than direct vent types) 554.22 Flue collar s and flue outlets (other than direct vent types) 564.23 Draft hoods 564.24 Automatic vent damper devices 574.25 Manually operat ed vent dampers 594.26 Electrical equipment and
44、wiring 594.27 Ins tructions 594.28 Markings 69ANSI Z21.50-2016 CSA 2.22-2016Vented decorative gas appliancesNovember 2016 2016 CSA Group 25 Performance 785.1 General 785.2 Tes t gases 815.3 Tes t pressure and burner adjustments 825.4 Combus tion 835.5 Appliance and burner durability tes t 845.6 Burn
45、er operating charact erist ics 855.7 Loose burner mat erial 875.8 Pilot operating charact erist ics 875.9 Pilot burners and safety shut -off devices 885.10 Direct ignition sy st ems 935.11 Pr oved ignit er sy st ems 955.12 Delayed ignition and integrity t ests for direct vent decorative gas applianc
46、es 995.13 Glass fr onts 1035.14 Burn hazard pot ential 1085.15 Impact t est of glass mater ials 1115.16 Wat er shock t est 1125.17 Main burner t emperatures 1125.18 Non-load-bearing flue gas baffle temperatures 1135.19 Appliance main gas valves 1145.20 Gas appliance pressure regulator s 1145.21 Auto
47、matic valves 1155.22 Safety circuit analysis 1155.23 Manifold and contr ol assembly capacity 1155.24 Condensat e drain s ys tem locat ed in blower compartment 1165.25 Temperatures at discharge air openings 1165.26 Wall, floor , and ceiling tempe ratures 1195.27 Flue gas tempe ratures 1275.28 Surface
48、 tem peratures 1285.29 Evaluation of clothing ignition potenti al 1325.30 Venting 1335.31 Draft hoods 1345.32 Draft tes ts for appliances not equipped with draft hoods 1375.33 Vent safety shut -off s ys tems 1375.34 Wind tes ts (sidewall t ermination) 1395.35 Wind tes t (vertical terminat ion) 1415.
49、36 Vent and vent -air intake termi nal assemblies 1445.37 Joints in direct vent sy st ems 1565.38 Allowable vent pipe, heating element and load-bearing flue gas baffle tempe ratures 1585.39 Automatic vent damper devices 1615.40 Marking mater ial adhesion and legibility 1646 Pr oduction and manufacturing t es ts 1657 It ems unique to the United State s 1677.1 Electrical equipment and wiring 1677.2 Electrical diagrams 1777.3 Motor s and blower s 1787.4 Thermos tats 179ANSI Z21.50-2016 CSA 2.22-2016Vented decorative gas appliancesNovember 2016 2016 CSA Group
