1、C22.2 No. 281.2-12Standard for Safety for PersonnelProtectionSystems for ElectricVehicle(EV) SupplyCircuits: Particular Requirements for Protection Devices for Use in Charging SystemsLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a cons
2、ensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in a
3、chieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or
4、 conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA G
5、roup makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIREC
6、T, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR
7、 ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to
8、render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA G
9、roup accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to en
10、force compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained
11、 herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitatio
12、n, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent
13、permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all s
14、uch patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of thi
15、s document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ relevant clause, table, and/or figure number; wording ofthe proposed change; and rationale
16、for the change.To purchase CSA Group Standards and related publications, visit CSA Groups Online Store atshop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044.Copyright 2016 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of
17、a Standardshould be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the sole and exclusive property of UL.This ANSI/UL Standard for Safety consists of the Second Edition including revisions through August 26,2016. The most rec
18、ent designation of ANSI/UL 22312 as an American National Standard (ANSI)occurred on August 26, 2016. ANSI approval for a standard does not include the Cover Page,Transmittal Pages, Title Page (front and back), or the Preface.Comments or proposals for revisions on any part of the Standard may be subm
19、itted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative StandardsDevelopment System (CSDS) at http:/.To purchase UL Standards, visit Comm 2000 at http:/m- call toll-free 1-888-853-3503.CONTENTSPREFACE 6INTRODUCTION1 Scope 6B2 General 6B3 Components 6
20、B4 Units of Measurement 6B5 Normative References 6BCONSTRUCTION6 General 87 Grounding 88 Insulation and Protective Features 89 Double or Reinforced Insulation Bridged By Components .910 Accessibility of Energized Parts 911 Internal Wiring 1112 Spacings 1113 Clearances and Creepage Distances 1214 Ope
21、rating Mechanism .1415 Isolation Monitor/Interrupter 1516 Grounding Circuit .1516.1 Grounding monitor/interrupter 1516.2 Grounding circuit impedance .1616.3 Grounding circuit employing a switched equipment grounding conductor .1617 Supervisory Circuit 1618 Leakage Cancellation .1718A Programmable Co
22、mponents 17PERFORMANCE19 General 1820 Humidity Conditioning .2021 Leakage Current Test 20A22 Conditioning Tests 2622.1 General .2622.2 Impact tests .2622.3 Drop tests .2622.4 Shock and vibration test 2723 System Operational Test Requirements .2723.1 General .2723.2 Ground-fault trip threshold .2823.
23、3 Interrupting time 3723.3A Environmental sequence .3823.4 High-resistance ground fault test .3923.5 Second neutral ground 42A23.6 Tests for isolation monitor/interrupters 4523.7 Tests for ground monitor/interrupter 4624 Resistance to Environmental Noise Test .48AUGUST 26, 2016 NMX-J-668-2-ANCE CAN/
24、CSA-C22.2 NO. 281.212 UL 2231-2 324.1 General .4824.2 Harmonic distortion immunity .48A24.3 Electrostatic discharge immunity 48A24.4 Radiated electromagnetic field immunity .48A24.5 Immunity to conducted disturbances, induced by RF fields .48A24.6 Electrical fast transient immunity 48B24.7 Voltage d
25、ips, short interruptions and voltage variations immunity .48B24.8 Magnetic field immunity .5024.9 Capacitor switching transient test .5024.10 Voltage surge test .5025 Normal Temperature Test .5026 Dielectric Voltage-Withstand Test .5227 Overload Test 5328 Endurance Test 5429 Low-Resistance Ground Fa
26、ult Test .5430 Supervisory Circuit Test .5631 Abnormal Operations Test .5632 Extra-Low-Resistance Ground Fault Test 5733 Short Circuit Test .5934 Terminal Lead Strain-Relief Test 5935 Power-Supply Cord Strain-Relief Test .6036 Mechanical Tests .6037 Section Deleted 6038 Accessible Conductive Parts w
27、ith Double or Reinforced Insulation Bridged by Components . .6039 Switched Equipment Grounding Conductor Tests (US Only) .6039.1 Switched equipment grounding conductor contact switching sequence .6039.2 Switched equipment grounding conductor mechanical endurance test .6239.3 Switched equipment groun
28、ding conductor ground fault test 6240 Leakage Cancellation Tests .6240.1 Class A GFCI masking 6241 Dust Test 65MANUFACTURING AND PRODUCTION LINE TESTS41A General 65RATINGS42 General 66MARKINGS43 General 66Annex A Reference Standards (Normative)A1 Reference Standards 66AAnnex B French and Spanish Tra
29、nslations (Informative)B1 French and Spanish Translations .71AUGUST 26, 2016NMX-J-668-2-ANCE CAN/CSA-C22.2 NO. 281.212 UL 2231-24Annex C Manufacturing and Production Line Tests (Normative)C1 General .72C2 Visual Inspection (All Systems) .72C3 CCID Tests 72C4 Production Line Tests for Complete CCIDs
30、72C4.1 CCID Trip - Rated Load - Low Leakage 72C4.2 CCID Trip - Rated Load - High Leakage .75C5 Manufacturers Proprietary Test Program for Special CCID Components 76C6 Manufacturers Proprietary Test Program for GM/I 76C7 Manufacturers Proprietary Test Program for IM/I .77AUGUST 26, 2016 NMX-J-668-2-A
31、NCE CAN/CSA-C22.2 NO. 281.212 UL 2231-2 5PREFACEThis is the harmonized ANCE, CSA Group, and UL Standard for Safety for Personnel Protection Systemsfor Electric Vehicle (EV) Supply Circuits: Particular Requirements for Protection Devices for Use inCharging Systems. It is the Second edition of NMX-J-6
32、682-ANCE, the First edition of CAN/CSA-C22.2No. 281.2, and the Second edition of UL 22312. This harmonized standard has been jointly revised onAugust 26, 2016. For this purpose, CSA Group and UL are issuing revision pages dated August 26, 2016,and ANCE is issuing a new edition dated August 26, 2016.
33、This harmonized standard was prepared by the Association of Standardization and Certification (ANCE),CSA Group, and Underwriters Laboratories Inc. (UL). The efforts and support of the TechnicalHarmonization Working Group for Personnel Protection Systems for Electric Vehicle (EV) Supply Circuitsare g
34、ratefully acknowledged.This Standard is considered suitable for use for conformity assessment within the stated scope of theStandard.The present Mexican Standard was reviewed and approved by the Comit de Normalizacin de laAsociacin de Normalizacin y Certificacin, A.C., CONANCE.This standard was revi
35、ewed by the CSA Subcommittee on Electric Vehicle Personal Protection Systemsfor Supply Circuits, under the jurisdiction of the CSA Technical Committee on Industrial Products and theCSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formallyapproved by the CSA Techni
36、cal Committee.This standard has been approved as a National Standard of Canada by the Standards Council of Canada(SCC).This standard has been approved by the American National Standards Institute (ANSI) as an AmericanNational Standard.Application of StandardWhere reference is made to a specific numb
37、er of specimens to be tested, the specified number is to beconsidered a minimum quantity.Note: Although the intended primary application of this standard is stated in its scope, it isimportant to note that it remains the responsibility of the users of the standard to judge itssuitability for their p
38、articular purpose.Level of harmonizationThis standard uses the IEC format but is not based on, nor is considered equivalent to, an IEC standard.This standard is published as an equivalent standard for ANCE, CSA Group, and UL.An equivalent standard is a standard that is substantially the same in tech
39、nical content, except as follows:Technical national differences are allowed for codes and governmental regulations as well as thoserecognized as being in accordance with NAFTA Article 905, for example, because of fundamental climatic,geographical, technological, or infrastructural factors, scientifi
40、c justification, or the level of protection thatthe country considers appropriate. Presentation is word for word except for editorial changes.AUGUST 26, 2016NMX-J-668-2-ANCE CAN/CSA-C22.2 NO. 281.212 UL 2231-26Reasons for differences from IECThis standard provides particular requirements for personn
41、el protection systems for electric vehicle supplycircuits for use in accordance with the electrical installation codes of Canada, Mexico, and the UnitedStates. At present there is no IEC standard for these products for use in accordance with these codes.Therefore, this standard does not employ any I
42、EC standard for base requirements.InterpretationsThe interpretation by the standards development organization of an identical or equivalent standard isbased on the literal text to determine compliance with the standard in accordance with the proceduralrules of the standards development organization.
43、 If more than one interpretation of the literal text has beenidentified, a revision is to be proposed as soon as possible to each of the standards developmentorganizations to more accurately reflect the intent.AUGUST 26, 2016 NMX-J-668-2-ANCE CAN/CSA-C22.2 NO. 281.212 UL 2231-2 6APersonnel Protectio
44、n Systems for Electric Vehicle (EV) SupplyCircuits: Particular Requirements for Protection Devices for Use inCharging SystemsINTRODUCTION1 Scope1.1 This Standard is intended to be used in conjunction with the general requirements of Annex A, Ref.No. 1. The requirements of Annex A, Ref. No. 1 apply u
45、nless modified by this Standard.2 General2.1 This Part contains the construction and performance requirements that are applied to a device that isintended to become an integral part of an overall device or charging system.2.2 Annex A, Ref. No. 1 contains an outline of the features required to provid
46、e protection based onvoltage and grounding or isolation of the system or part of the system under consideration.3 Components3.1 Except as indicated in 3.2, a component of a product covered by this standard shall comply with therequirements for that component.3.2 A component is not required to comply
47、 with a specific requirement that:a) Involves a feature or characteristic not required in the application of the component in theproduct covered by this standard, orb) Is superseded by a requirement in this standard.3.3 A component shall be used in accordance with its rating established for the inte
48、nded conditions ofuse.3.4 Specific components are incomplete in construction features or restricted in performance capabilities.Such components are intended for use only under limited conditions, such as certain temperatures notexceeding specified limits, and shall be used only under those specific
49、conditions.4 Units of Measurement4.1 The values given in SI (metric) units shall be normative. Any other values given shall be forinformation purposes only.5 Normative References5.1 Where reference is made to any Standards, such reference shall be considered to refer to the latesteditions and revisions ther
