1、 ANSI E1.6-2 2013 Entertainment Technology Design, Inspection, and Maintenance of Electric Chain Hoists for the Entertainment Industry Rig/2005-2040r10 blank page ANSI E1.6-2 2013 Entertainment Technology Design, Inspection, and Maintenance of Electric Chain Hoists for the Entertainment Industry Cop
2、yright 2017 ESTA. All rights reserved. Rig/2005-2040r10 Approved as an American National Standard by the ANSI Board of Standards Review on 10 July 2013. This standard was originally published when the Entertainment Services and Technology Association was operating under the name of PLASA North Ameri
3、ca. ESTA has reverted to its original name, and this document has been rebranded with the current corporate name and logo. No changes have been made to the contents of the standard. ANSI E1.6-2 2013, Design, Inspection, and Maintenance of Electric Chain Hoists for the Entertainment Industry 2017 EST
4、A page iv Rig/2005-2040r10 NOTICE and DISCLAIMER ESTA does not approve, inspect, or certify any installations, procedures, equipment or materials for compliance with codes, recommended practices or standards. Compliance with a ESTA standard or an American National Standard developed by ESTA is the s
5、ole and exclusive responsibility of the manufacturer or provider and is entirely within their control and discretion. Any markings, identification or other claims of compliance do not constitute certification or approval of any type or nature whatsoever by ESTA. ESTA neither guarantees nor warrants
6、the accuracy or completeness of any information published herein and disclaims liability for any personal injury, property or other damage or injury of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or r
7、eliance on this document. In issuing and distributing this document. In issuing this document, ESTA does not either (a) undertake to render professional or other services for or on behalf of any person or entity, or (b) undertake any duty to any person or entity with respect to this document or its
8、contents. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstance. Published by: Entertainment Services and Technology Association 630 Ninth
9、Avenue, Suite 609 New York, NY 10036 USA Phone: 1-212-244-1505 Fax: 1-212-244-1502 Email: standards.naESTA.org ANSI E1.6-2 2013, Design, Inspection, and Maintenance of Electric Chain Hoists for the Entertainment Industry 2017 ESTA page v Rig/2005-2040r10 The ESTA Technical Standards Program The ESTA
10、 Technical Standards Program was created to serve the ESTA membership and the entertainment industry in technical standards related matters. The goal of the Program is to take a leading role regarding technology within the entertainment industry by creating recommended practices and standards, monit
11、oring standards issues around the world on behalf of our members, and improving communications and safety within the industry. ESTA works closely with the technical standards efforts of other organizations within our industry, including USITT and VPLT, as well as representing the interests of ESTA m
12、embers to ANSI, UL, and the NFPA. The Technical Standards Program is accredited by the American National Standards Institute. The Technical Standards Council (TSC) was established to oversee and coordinate the Technical Standards Program. Made up of individuals experienced in standards-making work f
13、rom throughout our industry, the Council approves all projects undertaken and assigns them to the appropriate working group. The Technical Standards Council employs a Technical Standards Manager to coordinate the work of the Council and its working groups as well as maintain a “Standards Watch” on b
14、ehalf of members. Working groups include: Control Protocols, Electrical Power, Floors, Fog and Smoke, Followspot Position, Photometrics, Rigging, and Stage Lifts. ESTA encourages active participation in the Technical Standards Program. There are several ways to become involved. If you would like to
15、become a member of an existing working group, as have over four hundred people, you must complete an application which is available from the ESTA office. Your application is subject to approval by the working group and you will be required to actively participate in the work of the group. This inclu
16、des responding to letter ballots and attending meetings. Membership in ESTA is not a requirement. You can also become involved by requesting that the TSC develop a standard or a recommended practice in an area of concern to you. The Rigging Working Group, which authored this Standard, consists of a
17、cross section of entertainment industry professionals representing a diversity of interests. ESTA is committed to developing consensus-based standards and recommended practices in an open setting. ANSI E1.6-2 2013, Design, Inspection, and Maintenance of Electric Chain Hoists for the Entertainment In
18、dustry 2017 ESTA page vi Rig/2005-2040r10 Contact Information Technical Standards Manager Karl G. Ruling Entertainment Services and Technology Association 630 Ninth Avenue, Suite 609 New York, NY 10036 USA 1-212-244-1505 karl.rulingesta.org Assistant Technical Standards Manager Erin Grabe Entertainm
19、ent Services and Technology Association 630 Ninth Avenue, Suite 609 New York, NY 10036 USA 1-212-244-1505 erin.grabeesta.org Technical Standards Council Chairpersons Mike Garl Mike Garl Consulting LLC 1-865-389-4371 Mike Wood Mike Wood Consulting LLC 1-512-288-4916 Rigging Working Group Chairperso
20、ns Bill Sapsis Sapsis Rigging, Inc. 1-215-228-0888 x206 billsapsis- Christine Kaiser Syracuse Scenery M.G. McLaren, P.C.; G Jesse Adams; Rose Brand; DR Mark Ager; Stage Technologies Group Ltd.; CP Tray Allen; James Thomas Engineering, Inc.; MP Dana Bartholomew; Fisher Technical Services, Inc.; CP Wi
21、lliam Beautyman; Limelight Productions, Inc.; DR Nils Becker; Electronic Theater Controls; MP Patrick Leigh Bettington; Stage Technologies Group Ltd.; CP Keith Bohn; Milos Group; MP David Bond; Arcofab; U William Bradburn; Aerial Arts, Inc.; U Vincent J. Cannavale; Motion Laboratories; CP David Carm
22、ack; Columbus McKinnon Corp.; MP Joseph Champelli; ZFX Flying Inc.; CP Kimberly Corbett; Schuler Shook; DE Stu Cox; ZFX Flying Inc.; CP Dan Culhane; SECOA; CP Bruce Darden; Rigging Innovators, Inc.; CP Jonathan Deull; JSD Projects LLC; U Brad Dittmer; Stage Labor of the Ozarks; U Scott Fisher; Fishe
23、r Technical Services, Inc.; CP Adrian Forbes-Black; Total Structures Inc.; MP Howard Forryan; Harting KGAA; G Mike Garl; Milos Group; MP Ed Garstkiewicz; Harting KGAA; G Ethan William Gilson; Advanced Lighting and Production Services; U William B. Gorlin; M.G. McLaren, P.C.; G Jerry Gorrell; Theatre
24、 Safety Programs; G Earle T. Greene; Walt Disney Company; U Pat Grenfell; Mainstage Theatrical Supply; DR Joshua Grossman; Schuler Shook; DE Joel A Guerra; Texas Scenic Company; DR Rod Haney; I.A.T.S.E. Local 891; U Tim Hansen; Oasis Stage Werks; DR Pete Happe; Walt Disney Company; U Herb Hart; Colu
25、mbus McKinnon Corp.; MP Peter Herrmann; Motion Laboratories; CP David Herrmann; Motion Laboratories; CP Donald Hoffend III; Avista Designs, LLC; G Donald A. Hoffend Jr.; Avista Designs, LLC; G Wendy Holt; Alliance of Motion Picture and Television Producers; G Joseph Jeremy; Niscon Inc.; CP Christine
26、 L. Kaiser; Syracuse Scenery DR Rodney F. Kaiser; Wenger Corp.; CP Theresa Kelley; Total Structures Inc.; MP Kandie Koed; Total Structures Inc.; MP Edwin S. Kramer; I.A.T.S.E. Local 1; U Kyle Kusmer; Steven Schaefer Associates; G Roger Lattin; I.A.T.S.E. Local 728; U ANSI E1.6-2 2013, Design, Inspec
27、tion, and Maintenance of Electric Chain Hoists for the Entertainment Industry 2017 ESTA page viii Rig/2005-2040r10 Michael Lichter; Electronic Theatre Controls, Inc.; MP Dan Lisowski; University of Wisconsin - Madison; U Joseph McGeough; Foy Inventerprises, Inc.; CP Orestes Mihaly; Production Resour
28、ce Group; DR John (Jack) Miller; I Weiss; CP Jeff T. Miller; Walt Disney Company; U Rick Montgomery; R MP Reid Neslage; H MP Mark Newlin; Xtreme Structures and Fabrication; MP James Niesel; Arup; DE Richard J. Nix; Steven Schaefer Associates; G Shawn Nolan; Production Resource Group; DR Edward A. (T
29、ed) Paget; Daktronics Inc. ; CP Miriam Paschetto; Geiger Engineers; G Rocky Paulson; Freeman Companies; DR Troy Post; R MP Woody Pyeatt; A V Pro, Inc.; DR Gregory Quinkert; Motion Laboratories; CP John Ringelman; Freeman Companies; DR Rick Rosas; Texas Scenic Company; DR Eric Rouse; Pennsylvania Sta
30、te University; U Shawn Sack; Columbus McKinnon Corp.; MP Bill Sapsis; Sapsis Rigging, Inc.; U Peter A. Scheu; Scheu Consulting Services, Inc.; G Steven C. Shaw; Aerial Rigging; DR Todd Spencer; PSAV Presentation Services; U Stephen G. Surratt; Texas Scenic Company; DR Peter V. Svitavsky; Wenger Corp
31、.; CP Will Todd; Milos Group; MP Elmer Veith; Total Structures, Inc.; MP Steve Walker; Steve A. Walker G Charlie Weiner; LMG Inc.; DR Michael Wells; Xtreme Structures and Fabrication; MP Marty Wesstrom; Mountain Productions Inc.; DR Jeff Wilkowski; Thern, Inc.; MP R. Duane Wilson; Amer. Society of T
32、heatre Consultants; DE Robert Young; Arup; DE Art Zobal; Columbus McKinnon Corp.; MP Observer (non-voting) members: Frank Allison; G Brent Armstong; U William Ian Auld; Auld Entertainment; U Warren A. Bacon; U Rinus Bakker; Rhino Rigs B.V.; G Robert Barbagallo; Solotech Inc.; DR Roger Barrett; Star
33、Events Group Ltd.; DR F. Robert Bauer; F.R. Bauer G Maria Bement; MGM Grand; U Roy Bickel; G Lee J. Bloch; Bloch Design Group, Inc.; G Steve (BOZ) Bodzioch; LMG Inc.; G Ron Bonner; PLASA EU; G Louis Bradfield; U Buddy Braile; Bestek Lighting U Barry Brazell; U Andr Broucke; G ANSI E1.6-2 2013, Desig
34、n, Inspection, and Maintenance of Electric Chain Hoists for the Entertainment Industry 2017 ESTA page ix Rig/2005-2040r10 David M. Campbell; Geiger Engineers; G Michael J. Carnaby; Mikan Theatricals; DR Daniel J. Clark; Clark-Reder Engineering, Inc.; G Benjamin Cohen; Reed Rigging, Inc.; DR Ian Cole
35、s; Total Structures, Inc.; MP Gregory C. Collis; I.A.T.S.E. Local 16; G Randall W. A. Davidson; Risk International U Robert Dean; ZFX Flying Inc.; DR Franois Deffarges; Nexo; MP Cristina Delboni; Feeling Structures; MP Jim Digby; Linkin Park Touring/The Collective; U Noga Eilon-Bahar; Eilon Engineer
36、ing Industrial Weighing Systems; MP James B. Evans; Mountain Productions Inc.; DR Tim Franklin; Theta-Consulting; G Luca Galante; Alfa System Sas; CP Jay O. Glerum; Jay O. Glerum U Rand Goddard; W.E. Palmer Co.; CP Reuben Goldberg; Technic Services; U Thomas M. Granucci; San Diego State University;
37、U Sean Harding; High Output, Inc.; G Greg Hareld; Kleege Industries; U Dean Hart; Freeman Companies; U Ben Hayes; Freedom Flying; G Marc Hendriks; Prolyte; MP Ted Hickey; OAP Audio Products; MP Chris Higgs; Total Solutions Group; G Daniel Lynn Houser; Real Rigging Solutions, LLC; U Wes Jenkins; Down
38、 Stage Right Industries; CP Peter Johns; Total Structures, Inc.; MP Ted Jones; Chicago Spotlight, Inc.; U Kent H. Jorgensen; IATSE Local 80; G Gary Justesen; Oasis Stage Werks; DR John Kaes; U JoAnna Kamorin-Lloyd; Vincent Lighting Systems; U Nevin Kleege; Kleege Industries; U Ken Lager; Pook, Diemo
39、nt DR Jon Lagerquist; South Coast Repertory; U Eugene Leitermann; Theatre Projects Consultants, Inc.; G Jon Lenard; Applied Electronics; MP John Van Lennep; Theatrix Inc.; DR Mylan Lester; Creation Logics Ltd.; U Baer Long; Act 1 Rigging Inc.; G Dennis J. Lopez; Automatic Devices Co.; MP Jeff Lucas;
40、 Cirque Du Soleil, Inc.; G Darren Lucier; North Guard Fall protection Inc.; U Sam Lunetta; Michael Andrews; DR Gary Mardling; Kish Rigging; DR Chuck McClelland; Jeamar Winches Inc.; MP Richard C. Mecke; Texas Scenic Company; DR Hank Miller; W.E. Palmer Co.; CP Shaun Millington; SEW-Eurodrive, Inc.;
41、MP Timothy Mills; Geiger Engineers; G Scott Mohr; R G John “Andrew“ Munro; animaenagerie; U Bob Murphy; Occams Razor Technical Services; G Rikki Newman; U ANSI E1.6-2 2013, Design, Inspection, and Maintenance of Electric Chain Hoists for the Entertainment Industry 2017 ESTA page x Rig/2005-2040r10 T
42、racy Nunnally; Hall Associates Flying Effects; CP Michael Patterson; Pook Diemont CP G. Anthony Phillips; I.A.T.S.E. Local 16; U Philip J. Pisczak; The National Telephone Supply Company; G Michael Powers; Central Lighting DR Kurt Pragman; Pragman Associates, LLC; G Michael Reed; Reed Rigging, Inc.;
43、DR Mark Riddlesperger; LA ProPoint, Inc.; CP Timo Risku; Akumek; DE Michael L. Savage, Sr.; Middle Dept. Inspection Agency, Inc.; G Peter “Punch“ Christian Schmidtke ; Hollywood Lighting, Inc.; DR Knut Skjonberg; Skjonberg Controls, Inc.; CP Monica Skjonberg; Skjonberg Controls, Inc.; CP William Sco
44、tt Sloan; William Scott Sloan; U John C. Snook; Thermotex Industries Inc.; CP Rob Stevenson; SEW-Eurodrive, Inc.; MP Joachim Stoecker; CAMCO GmbH; MP Andy Sutton; AFX UK Ltd.; U John Van Arsdale; University of Wisconsin - Madison; U Stephen Vanciel; U Jiantong Wu; Beijing Special Engineering Design
45、G Interest category codes: CP = custom-market producer DE = designer DR = dealer rental company G = general interest MP = mass-market producer U = user ANSI E1.6-2 2013, Design, Inspection, and Maintenance of Electric Chain Hoists for the Entertainment Industry 2017 ESTA page xi Rig/2005-2040r10 Tab
46、le of Contents Acknowledgments . vii 1 Scope* 1 2 Definitions 1 3 Minimum Design Criteria 2 3.1 General 2 3.2 Mechanical Design . 2 3.3 Lift Wheel . 2 3.4 Chain Design 2 3.5 Chain End Fitting . 2 3.6 Hook Design. 3 3.7 Overload Protection Device . 3 3.8 Overtravel Positions . 3 3.9 Brake Design 3 3.
47、10 Lubrication 3 3.11 Power Failure Protection 3 3.12 Electrical Design 3 4 Inspections and Testing . 4 4.1 Service Classifications . 4 4.2 Inspection Requirements . 4 4.2.1 General 4 4.2.2 Frequent inspections . 4 4.2.3 Periodic inspections . 5 4.3 Testing . 5 5 Maintenance . 6 6 Labeling and Ident
48、ification . 6 6.1 Rated capacity . 6 6.2 Serial number . 6 6.3 Electrical specifications 6 6.4 Lifting speed . 6 6.5 Standard compliance . 6 6.6 Contact information 6 7 Documentation . 6 Annex Notes 7 ANSI E1.6-2 2013, Design, Inspection, and Maintenance of Electric Chain Hoists for the Entertainmen
49、t Industry 2017 ESTA page 1 Rig/2005-2040r10 1 Scope* This standard covers the design, inspection, and maintenance of serially manufactured electric link chain hoists having capacity of 2 tons or less and used in the entertainment industry. This standard does not cover attachment to the load or to the overhead structure. Controls used for multiple hoist operation are excluded from the scope of this standard. (NB: Clauses marked with an asterisk * have an explanatory Annex note.)
