1、 IEEE Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction Sponsored by the Power System Communications Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std 643-2004/Cor 1-2013 (Corrigendum to IEEE Std 643-2004)
2、IEEE Std 643-2004/Cor 1-2013 (Corrigendum to IEEE Std 643-2004) IEEE Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction Sponsor Power System Communications Committee of the IEEE Power and Energy Society Approved 11 December 2013 IEEE-SA Standards Board
3、Abstract: Corrections to Equation 16, and Equation 18 through Equation 20 are addressed in this corrigendum. Keywords: IEEE 643, modal analysis, power-line carrier The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2014 by The Institute
4、of Electrical and Electronics Engineers, Inc. All rights reserved. Published 10 January 2014. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness
5、 of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other wa
6、ys to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and commen
7、ts received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any perso
8、n utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL I
9、EEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, S
10、TRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process
11、involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Copyright 2014 IEEE. All rights reserved. iv Official statements A statement, written or oral, that is not p
12、rocessed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or education
13、al courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from an
14、y interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting co
15、mments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to
16、 provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant
17、 IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions
18、 of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is no
19、t in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private
20、uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any
21、rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payme
22、nt of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Copyri
23、ght 2014 IEEE. All rights reserved. v Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errat
24、a. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone
25、a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is th
26、e current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards developmen
27、t process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents At
28、tention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent
29、holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant
30、licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been rec
31、eived. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of
32、Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be
33、obtained from the IEEE Standards Association.Copyright 2014 IEEE. All rights reserved. vi Participants At the time this IEEE guide was completed, the C93.4 Working Group had the following membership: Roger E. Ray, Chair Miriam P. Sanders, Vice-chair John Miller, Working Group memberThe following mem
34、bers of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. John Banting Philip Beaumont Martin Best Robert Bratton Gustavo Brunello William Byrd Paul Cardinal Stephen Conrad James Cornelison Brian Cramer Randall Cunico Glenn Dav
35、is Gary Donner Randall Dotson Kenneth Fodero Doaa Galal Jalal Gohari Stephen Grier Randall Groves Roger Hedding James Kinney Joseph L. Koepfinger Jim Kulchisky Chung-Yiu Lam Greg Luri William McBride Michael Mcdonald John Miller Jerry Murphy Michael Newman Gary Nissen James OBrien Lorraine Padden Ri
36、chard Paes Percy Pool Roger E. Ray Michael Roberts Charles Rogers Zoltan Roman Miriam P. Sanders Sergio Santos Bartien Sayogo Mark Simon James Smith Gary Stoedter Demetrios Tziouvaras Joe Uchiyama Eric Udren John Vergis John Wang Kenneth White Philip Winston Copyright 2014 IEEE. All rights reserved.
37、 vii When the IEEE-SA Standards Board approved this guide on 11 December 2013, it had the following membership: John Kulick, Chair David J. Law, Vice-chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Peter Balma Farooq Bari Ted Burse Stephen Dukes Jean-Phillip
38、pe Faure Alexander Gelman Mark Halpin Gary Hoffman Paul Houz Jim Hughes Michael Janezic Joseph L. Koepfinger* Oleg Logvinov Ron Peterson Gary Robinson Jon Walter Rosdahl Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Yu Yuan *Member Emeritus Also included are the following nonvoting IEE
39、E-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Michelle Turner IEEE Standards Program Manager, Document Development Erin Spiewak IEEE Standards Program Manager, Technical Program Development Copyright 2014 IEEE. All rights reserved. viii Intr
40、oduction This introduction is not part of IEEE Std 643-2004/Cor 1-2013, IEEE Guide for Power-Line Carrier ApplicationsCorrigendum 1: Modal Analysis Power Equation Correction. Equation 16, and Equation 18 through Equation 20 of IEEE Std 643-2004 are corrected in this corrigendum. Copyright 2014 IEEE.
41、 All rights reserved. ix Contents 5. Power-line channel considerations . 2 5.3 Line loss calculations 2 5.3.3.1.2 Coupling to the power line . 2 Copyright 2014 IEEE. All rights reserved. 1 IEEE Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction IMPORTAN
42、T NOTICE: IEEE Standards documents are not intended to ensure safety, health, or environmental protection, or ensure against interference with or from other devices or networks. Implementers of IEEE Standards documents are responsible for determining and complying with all appropriate safety, securi
43、ty, environmental, health, and interference protection practices and all applicable laws and regulations. This IEEE document is made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publications containing this document and may be foun
44、d under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html. NOTEThe editing instructions contained in this corrigendum define how to merge the mater
45、ial contained therein into the existing base standard and its amendments to form the comprehensive standard. The editing instructions are shown in bold italic. Four editing instructions are used: change, delete, insert, and replace. Change is used to make corrections in existing text or tables. The
46、editing instruction specifies the location of the change and describes what is being changed by using strikethrough (to remove old material) and underscore (to add new material). Delete removes existing material. Insert adds new material without disturbing the existing material. Insertions may requi
47、re renumbering. If so, renumbering instructions are given in the editing instruction. Replace is used to make changes in figures or equations by removing the existing figure or equation and replacing it with a new one. Editing instructions, change markings, and this NOTE will not be carried over int
48、o future editions because the changes will be incorporated into the base standard.11Notes in text, tables, and figures of a standard are given for information only and do not contain requirements needed to implement this standard. IEEE Std 643-2004/Cor 1-2013 IEEE Guide for Power-Line Carrier Applic
49、ations Corrigendum 1: Modal Analysis Power Equation Correction Copyright 2014 IEEE. All rights reserved. 2 5. Power-line channel considerations 5.3 Line loss calculations 5.3.3.1.2 Coupling to the power line Replace Equation (16), Equation (18), Equation (19), and Equation (20) with the following equations: 321 IaIaIaIc += (16) 012121)11( ZIpPa+= (18) 022222 ZIPa= (19) 032323)11( ZIqPa+= (20)
