1、 IEEE Standard for Spectrum Sensing Interfaces and Data Structures for Dynamic Spectrum Access and Other Advanced Radio Communication Systems Corrigendum 1 Sponsored by the Dynamic Spectrum Access Networks Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Communications Society
2、 IEEE Std 1900.6-2011/Cor 1-2015 (Corrigendum to IEEE Std 1900.6-2011) IEEE Std 1900.6-2011/Cor 1-2015 (Corrigendum to IEEE Std 1900.6-2011) i Copyright 2016 IEEE. All rights reserved. IEEE Standard for Spectrum Sensing Interfaces and Data Structures for Dynamic Spectrum Access and Other Advanced Ra
3、dio Communication Systems Corrigendum 1 Sponsor Dynamic Spectrum Access Networks Standards Committee of the IEEE Communications Society Approved 5 December 2015 IEEE-SA Standards Board ii Copyright 2016 IEEE. All rights reserved. Abstract: Terms and definitions are modified in this corrigendum to IE
4、EE Std 1900.6-2011, in response to comments received during the approval process of IEEE Std 1900.1a-2012 and IEEE Std 1900.6a-2014, which could not be considered in the 1900.6a amendment. The use of terms and definitions in IEEE Std 1900.6 are aligned by these corrections, with their use in the sco
5、pe of IEEE Std 1900.1. Keywords: corrections, definitions, IEEE 1900.6, terms The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2016 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 23 Februa
6、ry 2016. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results
7、; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services r
8、elated to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards availa
9、ble, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent
10、judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENT
11、IAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT O
12、F THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard
13、is translated, only the English version published by IEEE should be considered the approved IEEE standard. iv Copyright 2016 IEEE. All rights reserved. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not b
14、e considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clea
15、r that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE doe
16、s not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is impo
17、rtant that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the
18、 matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following addre
19、ss: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulator
20、y requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doi
21、ng so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in priva
22、te self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropria
23、te fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 22
24、2 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. v Copyright 2016 IEEE. All rights reserved. Updating of IEEE Standards documents Users of I
25、EEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of
26、the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
27、 some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments,
28、 corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if a
29、ny, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require
30、 use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter
31、of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with rea
32、sonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which
33、a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminator
34、y. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. vi Copyright 2016 IEEE. All rights rese
35、rved. Participants At the time this corrigendum was submitted to the IEEE-SA Standards Board for approval, the 1900.6 Working Group had the following membership: Oliver Holland, Chair Bernd Bochow, Secretary and Technical Editor Michael Gundlach, Past Chair Ha-Nguyen Tran, Past Secretary Darcy Swain
36、, Past Technical Co-Editor Chen Sun, Past Technical Co-Editor Anwar Al-Dulaimi Krzysztof Cicho Jean-Baptiste Dor Gaith Hattab Vinh-Dien Hoang Konstantinos Katzis Li Lu Sajeev Manikkoth Torleiv Maseng Dominique Noguet Luzango Pangani Venkatesha Prasad Paul Thompson Anna Umbert Shaun Ying The followin
37、g members of the individual balloting committee voted on this corrigendum. Balloters may have voted for approval, disapproval, or abstention. Iwan Adhicandra Thomas Alexander Harry Bims Bernd Bochow Gennaro Boggia C. Caicedo Bastidas William Carney Juan Carreon Paul Chiuchiolo Keith Chow Krzysztof C
38、icho Charles Cook Todor Cooklev Patrick Diamond Yezid Donoso Malcolm Dowse Richard Edgar Marc Emmelmann Avraham Freedman Yue Gao Alexander Gelman Joel Goergen Randall Groves Michael Gundlach Marco Hernandez Werner Hoelzl Oliver Holland Tetsushi Ikegami Noriyuki Ikeuchi Sergiu Iordanescu Atsushi Ito
39、Raj Jain Toru Kabe Shinkyo Kaku Piotr Karocki Konstantinos Katzis Stuart Kerry Chad Kiger Adrian Kliks Bruce Kraemer Thomas Kurihara Paul Lambert Hyeong Ho Lee Arthur H. Light William Lumpkins James Marin Roger Marks Jeffery Masters Michael McInnis Michael Newman Alexandros Nikitas NickS.A. Nikjoo P
40、aul Nikolich Yoshihiro Ohba Satoshi Oyama Arumugam Paventhan Clinton Powell Venkatesha Prasad Leonard Pucker Benjamin Rolfe M. K. Sajeev Shigenobu Sasaki Naotaka Sato Bartien Sayogo Dorothy Stanley Thomas Starai Walter Struppler Chen Sun Michael Swearingen Steven Tilden Keat Beng Toh Ha-Nguyen Tran
41、Mark-Rene Uchida Lorenzo Vangelista Cornelis van Puijenbroek Dmitri Varsanofiev John Vergis Khurram Waheed Hung-Yu Wei Andreas Wolf Oren Yuen vii Copyright 2016 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this corrigendum on 5 December 2015, it had the following membership:
42、John D. Kulick, Chair Jon Walter Rosdahl, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Ted Burse Stephen Dukes Jean-Philippe Faure J. Travis Griffith Gary Hoffman Michael Janezic Joseph L. Koepfinger* David J. Law Hung Ling Andrew Myles T. W. Olsen G
43、lenn Parsons Ronald C. Petersen Annette D. Reilly Stephen J. Shellhammer Adrian P. Stephens Yatin Trivedi Phillip Winston Don Wright Yu Yuan Daidi Zhong *Member Emeritus viii Copyright 2016 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 1900.6-2011/Cor 1-2015, IEEE
44、 Standard for Spectrum Sensing Interfaces and Data Structures for Dynamic Spectrum Access and other Advanced Radio Communication SystemsCorrigendum 1. This corrigendum to IEEE Std 1900.6-2011 modifies terms and definitions in response to comments received during the approval process of IEEE Std 1900.1a-2012 and IEEE Std 1900.6a-2014, which could not be considered in the 1900.6a amendment. These corrections align the use of terms and definitions in IEEE Std 1900.6 with their use in scope of IEEE Std 1900.1.
