1、American National StandardDeveloped byfor Information Technology Finger Minutiae Formatfor Data Interchange Amendment 1INCITS 378-2009/AM1-2010INCITS 378-2009/AM1-2010Reaffirmed as INCITS 378:2009/AM 1:2010 R2015INCITS 378-2009/AM1-2010Amendment toINCITS 378-2009American National Standardfor Informa
2、tion Technology Figner Minutiae Formatfor Data Interchange Amendment 1SecretariatInformation Technology Industry CouncilApproved October 25, 2010American National Standards Institute, Inc.AbstractThis amendment to the INCITS 378-2009 standard assigns a new version number to distinguish the IN-CITS v
3、ersion from the SC 37 version, provides additional choices for multiple-finger codes, resolves minorinconsistencies, clarifies ambiguities, and updates Annex B. Approval of an American National Standard requires review by ANSI that therequirements for due process, consensus, and other criteria for a
4、pproval havebeen met by the standards developer.Consensus is established when, in the judgement of the ANSI Board ofStandards Review, substantial agreement has been reached by directly andmaterially affected interests. Substantial agreement means much more thana simple majority, but not necessarily
5、unanimity. Consensus requires that allviews and objections be considered, and that a concerted effort be madetowards their resolution.The use of American National Standards is completely voluntary; theirexistence does not in any respect preclude anyone, whether he has approvedthe standards or not, f
6、rom manufacturing, marketing, purchasing, or usingproducts, processes, or procedures not conforming to the standards.The American National Standards Institute does not develop standards andwill in no circumstances give an interpretation of any American NationalStandard. Moreover, no person shall hav
7、e the right or authority to issue aninterpretation of an American National Standard in the name of the AmericanNational Standards Institute. Requests for interpretations should beaddressed to the secretariat or sponsor whose name appears on the titlepage of this standard.CAUTION NOTICE: This America
8、n National Standard may be revised orwithdrawn at any time. The procedures of the American National StandardsInstitute require that action be taken periodically to reaffirm, revise, orwithdraw this standard. Purchasers of American National Standards mayreceive current information on all standards by
9、 calling or writing the AmericanNational Standards Institute.American National StandardPublished byAmerican National Standards Institute, Inc.25 West 43rd Street, New York, NY 10036Copyright 2010 by Information Technology Industry Council (ITI)All rights reserved.No part of this publication may be r
10、eproduced in anyform, in an electronic retrieval system or otherwise,without prior written permission of ITI, 1101 K Street NW, Suite 610Washington, DC 20005. Printed in the United States of AmericaCAUTION: The developers of this standard have requested that holders of patents that may berequired fo
11、r the implementation of the standard disclose such patents to the publisher. However,neither the developers nor the publisher have undertaken a patent search in order to identifywhich, if any, patents may apply to this standard. As of the date of publication of this standardand following calls for t
12、he identification of patents that may be required for the implementation ofthe standard, no such claims have been made. No further patent search is conducted by the de-veloper or publisher in respect to any standard it processes. No representation is made or impliedthat licenses are not required to
13、avoid infringement in the use of this standard.iForeword (This foreword is not part of American National Standard INCITS 378-2009/AM1-2010.)Requests for interpretation, suggestions for improvement or addenda, or defect re-ports are welcome. They should be sent to InterNational Committee for Informat
14、ionTechnology Standards (INCITS), ITI, 1101 K Street, NW, Suite 610, Washington, DC20005.This standard was processed and approved for submittal to ANSI by INCITS. Com-mittee approval of this standard does not necessarily imply that all committee mem-bers voted for its approval. At the time it approv
15、ed this standard, INCITS had thefollowing members:Don Wright, ChairJennifer Garner, SecretaryOrganization Represented Name of RepresentativeAdobe Systems Inc. Scott Foshee Steve Zilles (Alt.)AIM Global Inc. Dan Mullen Charles Biss (Alt.)Apple Computer, Inc. . Kwok Lau Helene Workman (Alt.)David Sing
16、er (Alt.)Distributed Management Task Force John Crandall Jeff Hilland (Alt.)Electronic Industries Alliance . Edward Mikoski, Jr. Henry Cuschieri (Alt.)EMC Corporation . Gary Robinson Farance Inc. Frank Farance Timothy Schoechle (Alt.)Google Zaheda Bhorat GS1 US . Ray Delnicki Frank Sharkey (Alt.)Jam
17、es Chronowski (Alt.)Mary Wilson (Alt.)Hewlett-Packard Company Karen Higginbottom Paul Jeran (Alt.)IBM Corporation Gerald Lane Robert Weir (Alt.)Arnaud Le Hors (Alt.)Debra Boland (Alt.)Steve Holbrook (Alt.)IEEE . Bill Ash Jodie Haasz (Alt.)Bob Labelle (Alt.)Intel Philip Wennblom Grace Wei (Alt.)Steph
18、en Balogh (Alt.)Lexmark International . Don Wright Dwight Lewis (Alt.)Paul Menard (Alt.)Jerry Thrasher (Alt.)Microsoft Corporation . Jim Hughes Dick Brackney (Alt.)John Calhoun (Alt.)National Institute of Standards Replace with: The collection of data related to a specific acquisition of a single or
19、 multiple-finger combination. In the general case, a minutiae record may contain multiple finger views with each single or multiple-finger view containing data from a different acquisition of the same single or multiple-finger combination. 2. Clause 6.5.2.3 Case 3; End of 4thline Replace “where the
20、line RH parallels.” with: “where the line R1H parallels.” 3. Clause 7.3 Finger Minutiae Record Organization; 1stbullet end of line 1; Replace “.fingers” with “.finger views” 4. Clause 7.4.2 Version number; last sentence Replace with: Upon approval of this standard, the version number shall be “035”
21、Version 3 revision 5. NOTE In order to enable decoders implementing both national and international versions of the standard, the revision number of this version was increased from “030” to “035”. Versions “031”, “032”, “033”, and “034” do not currently exist but could be used for revisions to the i
22、nternational standard. INCITS 378-2009/AM1-2010 2 5. Table 1 Minutiae Record Format Summary; row 2 - Version number Replace the current text for Valid values with: “0x30333500 (0 3 5 0x00)” Replace the current text for Notes with: “035” 6. Clause 7.4.3 Length of Record; last sentence Replace the cur
23、rent text with: “Note that valid record lengths are in the range of 40 - (232-1) inclusive.” 7. Table 1 Minutiae Record Format Summary; row 3 Length of Record Replace the current text for Valid values with: “40 to (232-1)” Replace the current text for Notes with: “0X00000028 0XFFFFFFFF” 8. Table1 Mi
24、nutiae Record Format Summary; row 7 - Number of Finger Views Replace the current text for Valid values with: “1-255” Replace the current text for Notes with: “Up to 16 views for each single or multiple-finger combination but the sum of all of these views shall not exceed 255” 9. Clause 7.3 Finger Mi
25、nutiae Record Organization; bullet 2 (3 changes) Replace the current text with: “One or more single or multiple-finger views consisting of: “ Second sub-bullet; replace the current text with: “A series consisting of zero or more fixed-length (6-byte) minutia descriptions, including the position, typ
26、e, angle and quality of the minutiae;” Third sub-bullet; replace the current text with: “Zero or more “Extended” data areas for this finger view, containing optional or vendor-specific information;” 10. Clause 7.4.7 Number of finger Views; Delete last sentence 11. Clause 7.5.1.1 Finger position; par
27、agraph 1 Replace with: The finger position shall be recorded in the first byte. The code for this byte shall be an entry chosen from Table 2 or Table 2a. Table 2 is a subset of information from Table 12 of the ANSI/NIST-ITL 1-2007 (Data Format for the Interchange of Fingerprint, Facial, row 9 Finger
28、 Position Replace the current text for Valid values with: “0-10; 13-15; 40-50” Replace the current text for Notes with: “See Tables 2, 2a” INCITS 378-2009/AM1-2010 313. After Table 2 insert the following table: Table 2a Multiple Finger Position Codes Finger position Finger code 2-Finger Combinations
29、 Right index/middle 40 Right middle/ring 41 Right ring/little 42 Left index/middle 43 Left middle/ring 44 Left ring/little 45 Right index/ Left index 46 3-Finger Combinations Right index/middle/ring 47 Right middle/ring/little 48 Left index/middle/ring 49 Left middle/ring/little 50 14. Clause 7.6.1
30、Extended Data Block function; Paragraph 1, Line 5; Replace “a value of 0” with “a value of 0x0000” 15. Clause 7.6.2.1 Extended Data Block Length; sentence 3; Replace continue with continues 16. Clause 7.6.3 Ridge Count Data Format; Replace sentence 3 with: Each ridge count is associated with a pair
31、of minutiae contained in the minutiae data area defined in 7.5.2. The two minutiae are a center minutia used as a reference to generate the ridge count to the second or target minutia. It is not required to generate ridge count information for each and every minutiae listed in the minutiae area. It
32、is acceptable to use only a subset of selected minutiae. However, no ridge information may be present that is not associated with minutiae listed in the minutiae area. 17. Clause 7.6.3.1 Ridge Count Extraction Method; delete bullet 3 18. Clause 7.6.3.1 Ridge Count Extraction Method; Table 5 Row 2; u
33、nder comments replace: “For each center minutia.” With “For each selected center minutia.” Row 3;under comments replace: “For each center minutia” With “For each selected center minutia.” 19. Clause 7.6.3.1 Ridge Count Extraction Method; Remove last paragraph beginning with: “EXAMPLE If the extracti
34、on method.” INCITS 378-2009/AM1-2010 4 20. Clause 7.6.3.2 Neighborhood ridge count extraction methods; Paragraph 1; sentence 1; Replace “extracted for each minutia” with “extracted for each selected minutia” Paragraph 2; bullet 1; Replace “Every minutia” with “Every selected minutia” Paragraph 6; se
35、ntence 1; Replace “extracted for each minutia” with “extracted for each selected minutia” Paragraph 7; bullet 3; Replace “Every minutia” with “Every selected minutia” Paragraph 9; remove bullet symbol before text 21. Clause 7.6.3.3 Ridge Count Data; paragraph 1; sentence 1; Replace with: “The first
36、byte of the ridge count data shall be represented by a single byte containing the extraction method as chosen from Table 5.” 22. Clause 7.6.3.3 Ridge Count Data; paragraph 1 Insert after paragraph 1: “The minimum size of the extended data area for ridge count data can occur if no minutiae are select
37、ed for ridge count information processing. This minimum size is 5 bytes 2 bytes for the length, 2 bytes for the ridge count data type, and 1 byte for the extraction method code. If a given quadrant or octant has no neighboring minutiae in it, a three-byte ridge count data element shall be recorded w
38、ith the first minutia index field set to the center minutia index number, the second minutia index field set to zero, and the ridge count field set to zero.” 23. Clause 7.6.3.3 Ridge Count Data; paragraph 2; Replace sentence 1 with: “The ridge count data shall be listed in increasing order of center
39、 minutiae index numbers as shown in Table 7 and Table 7a. 24. Clause 7.6.3.3 Ridge Count Data; Table 7; Replace the table title with: “Table 7 Ridge Count Extraction Method 0x00 (Non-specific) Example Ridge Count Data” INCITS 378-2009/AM1-2010 525. Clause 7.6.3.3 Ridge Count Data; Table 7; After Tab
40、le 7 insert the following table: Table 7a - Ridge Count Extraction Method 0x01 (Quadrants) Example Ridge Count Data Minutiae index #1 Minutiae index #2 Ridge count 0x03 0x00 0x000x03 0x01 0x04 0x03 0x09 0x02 0x03 0x0A 0x02 0x05 0x02 0x02 0x05 0x03 0x04 0x05 0x08 0x02 0x05 0x09 0x01 26. Clause 7.6.4.
41、5 Core Angle; 1stparagraph 4thsentence; Replace “represents 31 degrees.” with “represents 31 or 32 degrees.” 27. Clause 7.6.4.9 Delta Angles; 1stparagraph 4thsentence; Replace “represents 31 degrees.” with “represents 31 or 32 degrees.” 28. Annex A.2 Record Header; 1stline of diagrams: Replace the e
42、ntry in the box under “7.4.2 Version Number” with: 0350 29. Annex A.2 Record Header; 2ndrow of diagrams; reference numbers over fields are in error; Change 6.4.5 through 6.4.8 to 7.4.5 through 7.4.8 30. Annex A.3 Finger View; 2ndrow of diagrams; reference numbers over fields are in errors; Change 6.
43、5.1.5 through 6.5.1.8 to 7.5.1.5 through 7.5.1.8 31. Annex A.4 Finger Minutiae Data; 1strow of diagrams; The line underneath “A.4 Finger Minutiae Data” starting with “2 bytes” and ending with “6 bytes” is out of place. This line belongs above the title line together with appropriate spacing. 32. Ann
44、ex A.5 Extended Data; 1strow of diagrams; 1stfield; reference number over field is in error; Change 6.6.2.1 to 7.6.2.1 INCITS 378-2009/AM1-2010 6 33. Annex B.1 Data; Replace the B.1 with the following corrected information: B.1 Data Scan System: CBEFF Product Identifier = 0x00420011, not Appendix F
45、compliant, Scanner ID = 0x00B5 (these values are determined by the IBIA - for the Vendor ID - and by the vendor) Sensor Resolution: 500 dpi in both X and Y axes; 196.85 pixels per cm, Image was 512 by 512 pixels Plain live-scan prints of the left and right index fingers Left Index: Finger quality is
46、 90% of the maximum possible, determined by algorithm 55 owned by organization 6. There are 27 minutiae, listed in table below with no private or extended data. Right Index: Finger quality is 70% of the maximum possible, determined by algorithm 12 owned by organization 0x42. There are 22 minutiae, l
47、isted in table below. The Extended data area (Type 01- 4 triads of ridge count data for minutia #12) consists of twelve bytes of data: 0x120203, 0x120701, 0x120802, 0x120A05 Record length = 370 = 21 (record header) + 2 * 17 (finger headers) + 27 * 6 (minutiae for 1stfinger) + 2 (null extended data f
48、or 1stfinger) + 22 * 6 (minutiae for 2ndfinger) + 2 (extended area block length for second finger) + 17 (ridge count data for 2ndfinger) Left Index Finger Right Index Finger Minutia # Type X Y Angle quality Type X Y Angle quality1 Ending 100 14 112 90 ending 40 93 0 902 Ending 164 17 85 80 ridge 116
49、 100 0 803 Ridge 55 18 22 90 ending 82 95 12 704 Ridge 74 22 76 60 ridge 140 113 15 705 Ending 112 22 90 80 ending 122 135 18 806 Ridge 42 31 44 90 ridge 55 72 21 507 Ridge 147 35 51 90 ending 94 74 24 608 Ending 88 38 165 40 ending 155 62 42 809 Ridge 43 42 4 80 ridge 42 64 55 7010 Ending 56 48 33 70 ending 155 85 59 8011 Ending 132 49 72 90 ridge 96 192 62 8012 Ridge 71 50 66 80 ending 114 86 85 8013 Other 95 51 81 90 ridge 142 90 90 7014 Ending 112 53 132 50 ending 57 137 100 9015 Ridge 135 58 32 80 ending 131 75 110 801
