1、 INCITS/ISO/IEC 19794-9:2011/Amd1: 2013 2013 ISO/IEC 19794-9:2011/Amd1:2013 Information technology Biometric data interchange formats Part 9: Vascular image data AMD 1: Conformance testing methodology INCITS/ISO/IEC 19794-9:2011/Amd1:2013 2013 PDF disclaimer This PDF file may contain embedded typefa
2、ces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infring
3、ing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimi
4、zed for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. Adopted by INCITS (InterNational Committee for Information Tec
5、hnology Standards) as an American National Standard. Date of ANSI Approval: 8/7/2013 Published by American National Standards Institute, 25 West 43rd Street, New York, New York 10036 Copyright 2013 by Information Technology Industry Council (ITI). All rights reserved. These materials are subject to
6、copyright claims of International Standardization Organization (ISO), International Electrotechnical Commission (IEC), American National Standards Institute (ANSI), and Information Technology Industry Council (ITI). Not for resale. No part of this publication may be reproduced in any form, including
7、 an electronic retrieval system, without the prior written permission of ITI. All requests pertaining to this standard should be submitted to ITI, 1250 Eye Street NW, Washington, DC 20005. Printed in the United States of America ii ITIC 2013 All rights reserved ISO/IEC 19794-9:2011/Amd.1:2013(E) ISO
8、/IEC 2013 All rights reserved iiiForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of Inter
9、national Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison
10、 with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technic
11、al committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is dra
12、wn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Amendment 1 to ISO/IEC 19794-9:2011 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information tech
13、nology, Subcommittee SC 37, Biometrics. ISO/IEC 19794-9:2011/Amd.1:2013(E) ISO/IEC 2013 All rights reserved 1Information technology Biometric data interchange formats Part 9: Vascular image data AMENDMENT 1: Conformance testing methodology 1. The following text is to be added to the “Introduction“ c
14、lause of ISO/IEC 19794-9: Annex A addresses the conformance testing to be used for interchange format defined in this part of ISO/IEC 19794. This Annex A is distinct from ISO/IEC 29109-9, which addressed conformance testing only of the first, 2007, edition of ISO/IEC 19794-9. 2. The following text i
15、s to be added to the “Scope“ clause of ISO/IEC 19794-9: This part of ISO/IEC 19794 also specifies elements of conformance testing methodology, test assertions, and test procedures as applicable to this part of ISO/IEC 19794. Specifically, it establishes test assertions of the structure of the vascul
16、ar image data format as specified in Clause 8 of this part of ISO/IEC 19794 (Type A Level 1 as defined in ISO/IEC 19794-1:2011/Amd.1), test assertions of internal consistency by checking the types of values that may be contained within each field (Type A Level 2 as defined in ISO/IEC 19794-1:2011/Am
17、d.1), tests of semantic assertions (Type A Leve l 3 as defined in ISO/IEC 19794-1:2011/Amd.1). The conformance testing methodology specified in this part of ISO/IEC 19794 does not establish tests of other characteristics of biometric products or other types of testing of biometric products (e.g. acc
18、eptance, performance, robustness, security), tests of conformance of systems t hat do not produce data records conforming to the requirements of this part of ISO/IEC 19794. 3. The following text is to be added to the “Conformance“ clause of ISO/IEC 19794-9: Biometric data interchange format conforma
19、nce tests conform to this part of ISO/IEC 19794 if they satisfy all of the normative requirements set forth in Clauses 6, 7, and 8. Specifically, they shall use the test methodology specified in ISO/IEC 19794-1:2011/Amd.1, and all Level 1, Level 2 and Level 3 tests shall use the assertions defined i
20、n Table A.1 of Clause A.2 in this part of ISO/IEC 19794. Implementations of this part of ISO/IEC 19794 tested according to the specified methodology shall be able to claim conformance only to those biometric data record (BDB) requirements specified in this part of ISO/IEC 19794 that are tested by th
21、e test methods established by this methodology. ISO/IEC 19794-9:2011/Amd.1:2013(E) 2 ISO/IEC 2013 All rights reservedIn consideration of the semantic specifics in different parts of ISO/IEC 19794, all Level 1, Level 2, and Level 3 tests shall use the assertions defined in Table A.2 of clause A.3 of
22、this part of ISO/IEC 19794 in conformity with the concept and rules set in ISO/IEC 19794-1, Annex A. 4. Replace the current Annex A with the following new annex: ISO/IEC 19794-9:2011/Amd.1:2013(E) ISO/IEC 2013 All rights reserved 3Annex A (normative) Conformance Testing Methodology A.1 Introduction
23、This normative annex specifies elements of conformance testing methodology, test assertions, and test procedures as applicable to this part of biometric data interchange format standard. The testing methodology specified in ISO/IEC 19794-1:2011/Amd.1 shall apply. The content of the tables below is b
24、ased on the conformance testing methodology outlined in ISO/IEC 19794-1:2011/Amd.1 and shall only be used in the context of that testing methodology. A.2 Table of requirements in the base standard The normative requirements of this part of ISO/IEC 19794 are listed in Table A.1. The supplier of the I
25、UT should explain which optional components of the standard are supported and the testing laboratory should note the results of the test. Table A.1 Requirements of the Base Standard Requirement ID Reference in Base Standard Requirement Summary Level Status IUT Support Supported Range Test Result R-
26、1 6.1 The quantities in all records and vascular biometric image elements (pixel data), if represented as multi-byte quantities, are represented in big-endian format. 1 M N/A R- 2 6.1 The order for transmission shall also be the most significant byte first and the least significant byte last. Within
27、 a byte, the order of transmission shall be the most significant bit first and the least significant bit last. 3C O-1 N/A N/T R- 3 6.2 The scan sequence shall be raster scan order. 3C O-1 N/A N/T R- 4 7.1 The spatial sampling rate of the captured image shall be represented in terms of pixels per cen
28、timetre. 3C O-1 N/A N/T R- 5 7.2 The image shall have a dynamic range spanning at least 128 gray scale levels, allocating at least one byte (8 bits) per intensity value and providing at least 7 bits of useful intensity information. 1 M N/A R- 6 7.5 The captured image shall be an orthographic project
29、ion of the body area being imaged. 3C O-1 N/A N/T ISO/IEC 19794-9:2011/Amd.1:2013(E) 4 ISO/IEC 2013 All rights reservedRequirement ID Reference in Base Standard Requirement Summary Level Status IUT Support Supported Range Test Result R- 7 7.6.2 If lossless compression is used the image data shall be
30、 compressed in accordance with the JPEG-LS lossless compression algorithm specified in ISO/IEC 14495 or the JPEG2000 compression algorithm specified in ISO/IEC 15444. 3C O-1 N/A N/T R- 8 7.6.3 If lossy compression is used the image shall be compressed in accordance with the JPEG compression algorith
31、m specified in ISO/IEC 10918 or the JPEG2000 compression algorithm specified in ISO/IEC 15444. 3C O-1 N/A N/T R- 9 7.6.4 Images captured with more than three sensing channels shall be stored in accordance with the JPEG2000 compression algorithm as specified in ISO/IEC 15444. 3C O-1 N/A N/T R- 10 7.7
32、 The location of human body used for imaging shall be specified in the format. 1 M N/A R- 11 7.7 The direction (left/right) of hand and/or finger index (thumb, index, middle, ring, and little) shall be specified. 1 M N/A R- 12 8.2.1 The format identifier shall be recorded in four bytes. The format i
33、dentifier shall consist of three characters “VIR“ followed by a zero byte as a NULL string terminator. 1 M N/A R- 13 8.2.2 The number for the version of that part of ISO/IEC 19794 used for constructing the BDIR shall be placed in four bytes. This version number shall consist of three ASCII numerals
34、followed by a zero byte as a NULL string terminator. The first and second character will represent the major version number and the third character will represent the minor revision number. Upon approval of a specification, the initial version number will be “020” Version 2 revision 0. 1 M N/A R- 14
35、 8.2.3 The length (in bytes) of the entire BDIR shall be recorded in four bytes. 1 M R- 15 8.2.3 This count shall be the total length of the BDIR including the general record header and one or more representation records. 2 M R- 16 8.2.4 The total number of representation records contained in the BD
36、IR shall be recorded in two bytes. A minimum of one representation is required. 2 M R- 17 8.2.5 As this part of ISO/IEC 19794 does not support certifications this field shall be 00Hex. 1 M ISO/IEC 19794-9:2011/Amd.1:2013(E) ISO/IEC 2013 All rights reserved 5Requirement ID Reference in Base Standard
37、Requirement Summary Level Status IUT Support Supported Range Test Result R- 18 8.3.2 The representation-length field denotes the length in bytes of the representation including the representation header fields. 1 M R- 19 8.3.2 The representation-length four-byte field shall contain the length in byt
38、es of the vascular image. 2 M R- 20 8.3.3 The date and time field within a representation header shall be stated in Coordinated Universal Time (UTC). The capture date and time field shall consist of 9 bytes. Its value shall be encoded in the form given in ISO/IEC 19794-1. 1 M R- 21 8.3.4 The capture
39、 device technology ID shall be encoded in one byte. This field shall indicate the class of capture device technology used to acquire the captured biometric sample. A value of 00Hex indicates unknown or unspecified technology. See Table 4 for the list of possible values. 1 M R- 22 8.3.5 The capture d
40、evice vendor identifier shall identify the biometric organization that owns the product that created the BDIR. The capture device algorithm vendor identifier shall be encoded in two bytes carrying a CBEFF biometric organization identifier (registered by IBIA or other approved registration authority)
41、. A value of all zeros shall indicate that the capture device vendor is unreported. 1 O R- 23 8.3.6 The capture device type identifier shall identify the product type that created the BDIR. It shall be assigned by the registered product owner or other approved registration authority. A value of all
42、zeros shall indicate that the capture device type is unreported. 1 O R- 24 8.3.6 If the capture device vendor identifier is 0000Hex, then also the capture device type identifier shall be 0000Hex. 2 O R- 25 8.3.7.1 Number of quality block field is followed by the number of 5-byte Quality Blocks refle
43、cted by its value. 1 O R- 26 8.3.7.1 A value of zero (0) means that no attempt was made to assign a quality score. In this case, no Quality Blocks are present. 2 O R- 27 8.3.7.2 Quality score, as defined in ISO/IEC 29794-1, shall be a quantitative expression of the predicted verification performance
44、 of the biometric sample. 3C O-1 N/A N/T ISO/IEC 19794-9:2011/Amd.1:2013(E) 6 ISO/IEC 2013 All rights reservedRequirement ID Reference in Base Standard Requirement Summary Level Status IUT Support Supported Range Test Result R- 28 8.3.7.2 An entry of 255 shall indicate a failed attempt to calculate
45、a quality score. This value of Quality Score is harmonized with ISO/IEC 19784-1, where 255 is -1. 1 O R- 29 8.3.7.3 Quality Algorithm Vendor ID shall be registered with IBIA or other approved registration authority as a CBEFF biometric organization. 3C O-1 N/A N/T R- 30 8.3.7.3 A value of all zeros
46、shall indicate that the value for Quality algorithm vendor ID field is unreported. 1 O R- 31 8.3.7.4 Quality Algorithm ID may be optionally registered with IBIA or other approved registration authority as a CBEFF Product Code. Refer to CBEFF product registry procedures in ISO/IEC 19785-2. A value of
47、 all zeros shall indicate that the value for Quality algorithm ID field is unreported. 1 O R- 32 8.3.9 These two fields specify the horizontal and vertical image size in pixels, in two bytes for each field. 1 M R- 33 8.3.10 Bit-depth field represents the number of bits per pixel in a gray scale imag
48、e or the number of bits per color component per pixel in an RGB image. 1 R- 34 8.3.11 Image position and property bit field is a mandatory field specifying the position, direction, and properties of the object. The first two bits specify the direction of organ (toward the left or the right). 1 M N/A
49、 R- 35 8.3.12 The unit is degree normalized to 16-bit signed integer as (unsigned short) round (65536*(angle%360) /360). 1 O R- 36 8.3.13 Two-byte field of Image format specifies whether the image is monochrome or color and how the image has been compressed if applicable. 1 M R- 37 8.3.14 The type of illumination shall be categorized based on the wavelength of illumination source; that is, the wavelength of vis