1、INTERNATIONAL STANDARD ISO/IEC 7501-3 First edition 1997-04-l 5 Identification cards - Machine readable travel documents - Part 3: Machine readable official travel documents Cartes didentification - Documents de voyage lisibles par machine - Partie 3: Documents de voyage officiels lisibles par machi
2、ne Reference number lSO/IEC 7501-3:1997(E) Adopted by INCITS (InterNational Committee for Information Technology Standards) as an American National Standard.Date of ANSI Approval: 4/14/99Published by American National Standards Institute,25 West 43rd Street, New York, New York 10036Copyright 2002 by
3、 Information Technology Industry Council (ITI).All rights reserved.These materials are subject to copyright claims of International Standardization Organization (ISO), InternationalElectrotechnical Commission (IEC), American National Standards Institute (ANSI), and Information Technology Industry Co
4、uncil(ITI). Not for resale. No part of this publication may be reproduced in any form, including an electronic retrieval system, withoutthe prior written permission of ITI. All requests pertaining to this standard should be submitted to ITI, 1250 Eye Street NW,Washington, DC 20005.Printed in the Uni
5、ted States of AmericaISO/IEC 7501-3:1997(E) Foreword IS0 (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of IS0 or IEC participate in the developme
6、nt of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. IS0 and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental,
7、 in liaison with IS0 and IEC, also take part in the work. In the field of information technology, IS0 and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication
8、as an International Standard requires approval by at least 75 % of the national bodies casting a vote. international Standard ISO/IEC 7501-3 was prepared by Joint Technical Committee ISO/IEC JTC 1, information technology, Subcommittee SC 17, Identification cards and related devices. lSO/IEC 7501 con
9、sists of the following parts, under the general title Identification cards - Machine readable travel documents: - Part 1: Machine readable passport - Part 2: Machine readable visa - Part 3: Machine readable official travel documents 0 ISO/IEC 1997 All rights reserved. Unless otherwise specified, no
10、part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopyrng and microfilm, without permission in writing from the publisher. ISO/IEC Copyright Office l Case postale 56 l CH-1211 Geneve 20 l Switzerland Printed in Switzerland ii
11、 INTERNATIONAL STANDARD QS*IEC ISO/IEC 7501-3 : 1997 (E) Identification cards - Machine readable travel documents - Part 3: Machine readable official travel documents The current edition of the following document is adopted as International Standard ISO/IEC 7501-3 : 1997: - International Civil Aviat
12、ion Organization (ICAO), Dot 9303 Part 3 - Size-l and Size-2 Machine Readable Official Travel Documents, Sections III and IV, Technical Specifications. This International Standard specifies generic formats and minimum data elements for visual inspection and machine reading of official travel documen
13、ts in the ID-l and ID-2 card formats containing a single form of machine readable data (optical character recognition, OCR), which may at the option of Governments, be accepted in lieu of a passport as defined in Annex 9 (Chapter 3, paragraph 3.4) to the Convention on International Civil Aviation ye
14、ar 1946 (as revised). ICAO Dot 9303 Part 3 is maintained by a Technical Advisory Group on Machine Readable Travel Documents (TAG/MRTD). ISO/IEC JTCI has provided liaison during the TAG/MRTD meetings on Dot 9303 Part 3 and considered the technical specifications to which the endorsement notice applie
15、s. Information on the TAG/MRTD for ICAO 9303 Part 3 may be obtained on application to the Secretary General, International Civil Aviation Organization, 999 University Street, Montreal, Quebec, Canada H3C 5H7. Note Copies of ICAO Dot 9303 Part 3 may be obtained from the International Civil Aviation O
16、rganization, 999 University Street, Montreal, Quebec, Canada H3C 5H7. Technical Specifications defined in Sections III and IV of ICAO Dot 9303 Part 3 refers to a number of International Standards. Specifically, IS0 1073-2 : 1976, Alphanumeric character sets for opticalrecognition - Part 2: Character
17、set OCR-B - Shapes and dimensions of the printed image. IS0 1831 : 1980, Printing specifications for optical character recognition. ISO/IEC 7810 : 1995, identification cards - Physical characteristics. IS0 8601 : 1988, Data elements and interchange formats - Information interchange - Representation
18、of dates and times. IS0 3166 : 1993, Codes for the representation of names of countries. Additional information This International Standard does not adopt Sections I and II of ICAO Dot 9303 Part 3. Section I is “Introduction” Section II is “General considerations” A number of differences exist betwe
19、en the specifications contained in ISO/IEC 7501-3 and ISO/IEC 7810 to accommodate the specific construction requirements of Machine Readable Travel Documents and the use of OCR machine readable technology. The specifications contained in ISO/IEC 7501-3 shall prevail where differences exist. ISO/IEC 7501-3:1997(E) ICS 35240.15 Descriptors: data processing, information interchange, identification cards. identlty cards, machine-readable documents, travel documents, specifications, physical properties, dimensions, layout. Price based on 1 page
