1、 AMERICAN NATIONAL STANDARD ANSI/ISA75.08.042001 (R2013) Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 4500) Approved 31 January 2013 ANSI/ISA-75.08.04-2001 (R2013) Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 4500) ISBN: 978-1-937560-98-0 C
2、opyright 2013 by ISA. All rights reserved. Not for resale. Printed in the United States of America. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means (electronic mechanical, photocopying, recording, or otherwise), without the prio
3、r written permission of the Publisher. ISA 67 Alexander Drive P.O. Box 12277 Research Triangle Park, North Carolina 27709 - 3 - ANSI/ISA-75.08.04-2001 (R2013) Preface This preface, as well as all footnotes and annexes, is included for information purposes and is not part of ANSI/ISA-75.08.04-2001 (R
4、2013). This document has been prepared as part of the service of ISA towards a goal of uniformity in the field of instrumentation. To be of real value, this document should not be static but should be subject to periodic review. Toward this end, the Society welcomes all comments and criticisms and a
5、sks that they be addressed to the Secretary, Standards and Practices Board; ISA; 67 Alexander Drive; P. O. Box 12277; Research Triangle Park, NC 27709; Telephone (919) 549-8411; Fax (919) 549-8288; E-mail: standardsisa.org. The ISA Standards and Practices Department is aware of the growing need for
6、attention to the metric system of units in general, and the International System of Units (SI) in particular, in the preparation of instrumentation standards. The Department is further aware of the benefits to USA users of ISA standards of incorporating suitable references to the SI (and the metric
7、system) in their business and professional dealings with other countries. Toward this end, this Department will endeavor to introduce SI-acceptable metric units in all new and revised standards, recommended practices, and technical reports to the greatest extent possible. IEEE/ASTM SI 10, American N
8、ational Standard for Metric Practice, and future revisions, will be the reference guide for definitions, symbols, abbreviations, and conversion factors. It is the policy of ISA to encourage and welcome the participation of all concerned individuals and interests in the development of ISA standards,
9、recommended practices, and technical reports. Participation in the ISA standards-making process by an individual in no way constitutes endorsement by the employer of that individual, of ISA, or of any of the standards, recommended practices, and technical reports that ISA develops. CAUTION ISA DOES
10、NOT TAKE ANY POSITION WITH RESPECT TO THE EXISTENCE OR VALIDITY OF ANY PATENT RIGHTS ASSERTED IN CONNECTION WITH THIS DOCUMENT, AND ISA DISCLAIMS LIABILITY FOR THE INFRINGEMENT OF ANY PATENT RESULTING FROM THE USE OF THIS DOCUMENT. USERS ARE ADVISED THAT DETERMINATION OF THE VALIDITY OF ANY PATENT R
11、IGHTS, AND THE RISK OF INFRINGEMENT OF SUCH RIGHTS, IS ENTIRELY THEIR OWN RESPONSIBILITY. PURSUANT TO ISAS PATENT POLICY, ONE OR MORE PATENT HOLDERS OR PATENT APPLICANTS MAY HAVE DISCLOSED PATENTS THAT COULD BE INFRINGED BY USE OF THIS DOCUMENT AND EXECUTED A LETTER OF ASSURANCE COMMITTING TO THE GR
12、ANTING OF A LICENSE ON A WORLDWIDE, NON-DISCRIMINATORY BASIS, WITH A FAIR AND REASONABLE ROYALTY RATE AND FAIR AND REASONABLE TERMS AND CONDITIONS. FOR MORE INFORMATION ON SUCH DISCLOSURES AND LETTERS OF ASSURANCE, CONTACT ISA OR VISIT WWW.ISA.ORG/STANDARDSPATENTS. OTHER PATENTS OR PATENT CLAIMS MAY
13、 EXIST FOR WHICH A DISCLOSURE OR LETTER OF ASSURANCE HAS NOT BEEN RECEIVED. ISA IS NOT RESPONSIBLE FOR IDENTIFYING PATENTS OR PATENT APPLICATIONS FOR WHICH A LICENSE MAY BE REQUIRED, FOR CONDUCTING INQUIRIES INTO THE LEGAL VALIDITY OR SCOPE OF PATENTS, OR DETERMINING WHETHER ANY LICENSING TERMS OR C
14、ONDITIONS PROVIDED IN CONNECTION WITH SUBMISSION OF A LETTER OF ASSURANCE, IF ANY, OR IN ANY LICENSING AGREEMENTS ARE REASONABLE OR NON-DISCRIMINATORY. ISA REQUESTS THAT ANYONE REVIEWING THIS DOCUMENT WHO IS AWARE OF ANY PATENTS THAT MAY IMPACT IMPLEMENTATION OF THE DOCUMENT NOTIFY THE ISA STANDARDS
15、 AND PRACTICES DEPARTMENT OF THE PATENT AND ITS OWNER. ANSI/ISA-75.08.04-2001 (R2013) - 4 - ADDITIONALLY, THE USE OF THIS DOCUMENT MAY INVOLVE HAZARDOUS MATERIALS, OPERATIONS OR EQUIPMENT. THE DOCUMENT CANNOT ANTICIPATE ALL POSSIBLE APPLICATIONS OR ADDRESS ALL POSSIBLE SAFETY ISSUES ASSOCIATED WITH
16、USE IN HAZARDOUS CONDITIONS. THE USER OF THIS DOCUMENT MUST EXERCISE SOUND PROFESSIONAL JUDGMENT CONCERNING ITS USE AND APPLICABILITY UNDER THE USERS PARTICULAR CIRCUMSTANCES. THE USER MUST ALSO CONSIDER THE APPLICABILITY OF ANY GOVERNMENTAL REGULATORY LIMITATIONS AND ESTABLISHED SAFETY AND HEALTH P
17、RACTICES BEFORE IMPLEMENTING THIS DOCUMENT. THE USER OF THIS DOCUMENT SHOULD BE AWARE THAT THIS DOCUMENT MAY BE IMPACTED BY ELECTRONIC SECURITY ISSUES. THE COMMITTEE HAS NOT YET ADDRESSED THE POTENTIAL ISSUES IN THIS VERSION. The following people served as members of ISA Subcommittee SP75.08 and app
18、roved ANSI/ISA-75.08.04-2001: NAME COMPANY W. Weidman, Managing Director Parsons Energy & Chemicals Group H. Baumann H B Services Partners LLC G. Borden Consultant R. Brodin Fisher Controls International, Inc. F. Cain Flowserve Corp. R. Chown Otec Process Systems, Inc. B. Hatton DeZurik Division Uni
19、t J. Reed Norriseal H. Sonderegger Anvil International, Inc. The following people served as members of ISA Committee SP75 and approved ANSI/ISA-75.08.04-2001: NAME COMPANY W. Weidman, Managing Director Parsons Energy & Chemicals Group D. Buchanan, Chairman Union Carbide Corp. A. Abromaitis Red Valve
20、 Co., Inc. H. Backinger Consultant G. Barb Consultant H. Baumann H B Services Partners LLC J. Beall Eastman Chemical Co. W. Black Cashco, Inc. W. Blackwell Industrial Valve H. Boger Masoneilan Dresser G. Borden Consultant S. Boyle Metso Automation USA, Inc. R. Brodin Fisher Controls International, I
21、nc. F. Cain Flowserve Corp. A. Engels Praxair, Inc. H. Fuller Valvcon Corp. J. George Richards Industries L. Griffith Consultant D. Grunenberg Richards Industries J. Jamison Bantrel, Inc. R. Jeanes TXU Electric J. Kersh M W Kellogg Co. C. Langford Cullen G. Langford, Inc. - 5 - ANSI/ISA-75.08.04-200
22、1 (R2013) W. Lestan Dresser Valve Division A. Libke DeZurik Valve Co. R. Louviere Services Unlimited J. McCaskill Power Chokes A. McCauley Chagrin Valley Controls, Inc. R. McEver Emerson Valve Automation H. Miller Control Components, Inc. T. Molloy CMES, Inc. L. Ormanoski Frick Co. J. Ozol Northern
23、States Power W. Rahmeyer Utah State University J. Reed Norriseal K. Schoonover Con-Tek Valves, Inc. A. Shea DeZurik/Copes-Vulcan E. Skovgaard Leslie Controls, Inc. H. Sonderegger Anvil International, Inc. _ * One vote per company. ANSI/ISA-75.08.04-2001 was approved for publication by the ISA Standa
24、rds and Practices Board on 04 April 2001. NAME COMPANY M. Zielinski Fisher-Rosemount Systems, Inc. D. Bishop Consultant P. Brett Honeywell, Inc. M. Cohen Senior Flexonics, Inc. M. Coppler Ametek, Inc. B. Dumortier Schneider Electric SA W. Holland Southern Company A. Iverson Ivy Optiks R. Jones Dow C
25、hemical Co. V. Maggioli Feltronics Corp. T. McAvinew Instrumentation & Control Engineering LLC A. McCauley, Jr. Chagrin Valley Controls, Inc. G. McFarland Westinghouse Process Control Inc. D. Rapley Rapley Consulting Inc. R. Reimer Rockwell Automation J. Rennie Factory Mutual Research Corp. H. Sasaj
26、ima Advanced Architecture and Technologies R. Webb Altran Corp. W. Weidman Parsons Energy & Chemicals Group J. Weiss EPRI J. Whetstone National Institute of Standards & Technology M. Widmeyer EG&G Defense Materials R. Wiegle CANUS Corp. C. Williams Eastman Kodak Co. G. Wood Graeme Wood Consulting AN
27、SI/ISA-75.08.04-2001 (R2013) - 6 - The following people served as members of ISA Subcommittee ISA75.08 and reaffirmed ANSI/ISA-75.08.04-2001 (R2013): NAME COMPANY W. Weidman, Chair WCW Consulting H. Baumann H B Services Partners LLC G. Borden Consultant F. Cain Flowserve Corporation R. Chown Madawas
28、ka Mechanical Inc. R. Duimstra Fisher Controls International Inc. V. Mezzano Fluor Corporation J. Reed Consultant J. Young The Dow Chemical Company The following people served as members of ISA Committee ISA75 and reaffirmed ANSI/ISA-75.08.04-2001 (R2013): NAME COMPANY J. Young, Chair The Dow Chemic
29、al Company W. Weidman, Managing Director WCW Consulting L. Al-Awami Saudi Aramco H. Baumann H B Services Partners LLC J. Beall Emerson Process Management M. Bober Copes-Vulcan H. Boger GE Oil & Gas G. Borden Consultant S. Boyle Metso Automation USA Inc. J. Broyles Enbridge Pipelines Inc. F. Cain Flo
30、wserve Corporation R. Duimstra Fisher Controls International Inc. J. Faramarzi Control Components Inc. J. George Richards Industries C. Hergert Kellogg Brown & Root H. Hoffmann Consultant J. Jamison Spectra Energy Ltd. J. Kiesbauer Samson Aktiengesellschaft A. Libke DeZurik G. Liu Consultant T. Loud
31、in Flowrox Inc. H. Maxwell Bechtel Power Corp. J. McCaskill Expro Group A. McCauley Chagrin Valley Controls Inc. R. McEver Consultant V. Mezzano Fluor Corporation H. Miller Consultant T. Molloy CMES Inc. L. Ormanoski Consultant J. Reed Consultant E. Skovgaard Control Valve Solutions - 7 - ANSI/ISA-7
32、5.08.04-2001 (R2013) This standard was approved for reaffirmation by the ISA Standards and Practices Board on 14 January 2013: NAME COMPANY D. Dunn, Vice President Aramco Services Co. R. Bartusiak ExxonMobil Chemical Company P. Brett Honeywell Inc. J. Campbell Consultant M. Coppler Det Norske Verita
33、s Certification Inc. E. Cosman The Dow Chemical Co. B. Dumortier Schneider Electric J. Federlein Federlein & Assoc. Inc. J. Gilsinn Kenexis Consulting E. Icayan ACES Inc. J. Jamison Spectra Energy Ltd. K. Lindner Endress+Hauser Process Solutions AG V. Maggioli Feltronics Corp. T. McAvinew Instrument
34、ation and Control Engineering LLC R. Reimer Rockwell Automation S. Russell Valero Energy Corp. N. Sands DuPont H. Sasajima Azbil Corp. T. Schnaare Rosemount Inc. J. Tatera Tatera & Associates Inc. I. Verhappen Industrial Automation Networks Inc. W. Weidman WCW Consulting J. Weiss Applied Control Sol
35、utions LLC M. Wilkins Yokogawa IA Global Marketing (USMK) D. Zetterberg Chevron Energy Technology Company This page intentionally left blank. - 9 - ANSI/ISA-75.08.04-2001 (R2013) CONTENTS 1 Scope . 11 2 Purpose 11 3 Definition 11 4 Dimensional Data . 11 5 References . 12 Annex A (informative) Dimens
36、ions for metrically sized valves . 13 This page intentionally left blank. - 11 - ANSI/ISA-75.08.04-2001 (R2013) 1 Scope This standard applies to buttweld-end globe-style control valves, sizes 1/2 inch (15 mm) through 8 inches (200 mm), having top and cage guiding. 2 Purpose The purpose of this stand
37、ard is to aid users in their piping designs by providing Class 4500 buttweld-end control valve dimensions, without giving special consideration to specific equipment manufacturers. 3 Definition For definitions of terms used in this standard, see ANSI/ISA-75.05.01-2000 (R2005), Control Valve Terminol
38、ogy. 4 Dimensional Data Face-to-face buttweld-end valve dimensions are listed in Table 1. Table 1 Face-to-face dimensions for buttweld-end globe-style control valves Nominal Valve Size Class 4500 Tolerance mm inches Dimension “A“ mm inches mm inches 15 1/2 298 11.75 1.6 0.062 20 3/4 298 11.75 1.6 0.
39、062 25 1 298 11.75 1.6 0.062 40 1-1/2 298 11.75 1.6 0.062 50 2 378 14.88 1.6 0.062 80 3 479 18.88 1.6 0.062 100 4 584 23.00 1.6 0.062 150 6 883 34.75 2.4 0.093 200 8 1,118 44.00 2.4 0.093 “ A “ ANSI/ISA-75.08.04-2001 (R2013) - 12 - 5 References American Society of Mechanical Engineers (ASME) ASME B1
40、6.34-2004 Valves - Flanged, Threaded and Welding Ends ASME B16.25-2003 Buttwelding Ends Availabe from: ASME Three Park Avenue New York, NY 10016-5990 Tel: 212-591-7000 http:/www.asme.org ISA ANSI/ISA-75.05.01-2000 Control Valve Terminology (R2005) Available from: ISA 67 Alexander Drive PO Box 12277
41、Research Triangle Park, NC 27709 Tel: 919-549-8411 http:/www.isa.org - 13 - ANSI/ISA-75.08.04-2001 (R2013) Annex A (informative) Dimensions for metrically sized valves This annex is not part of ANSI/ISA-75.08.04-2001 (R2013), but it is included to facilitate its use. The standards listed in the bibl
42、iography contain valve body design information in addition to face-to-face dimensions. Dimensions for metrically sized valves are nominal conversions that are conventionally used in documents in the Manufacturers Standardization Society (MSS) of the Valve and Fitting Industrys Publication MSS-SP86-2
43、002, and also in International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC) documents. This page intentionally left blank. Developing and promulgating sound consensus standards, recommended practices, and technical reports is one of ISAs primary goals. T
44、o achieve this goal the Standards and Practices Department relies on the technical expertise and efforts of volunteer committee members, chairmen and reviewers. ISA is an American National Standards Institute (ANSI) accredited organization. ISA administers United States Technical Advisory Groups (US
45、TAGs) and provides secretariat support for International Electrotechnical Commission (IEC) and International Organization for Standardization (ISO) committees that develop process measurement and control standards. To obtain additional information on the Societys standards program, please write: ISA Attn: Standards Department 67 Alexander Drive P.O. Box 12277 Research Triangle Park, NC 27709 ISBN: 978-1-937560-98-0
