1、 ASABE/ISO 14269-3:1997 (SEP2006) (R2017) Tractors and self-propelled machines for agriculture and forestry Operator enclosure environment Part 3: Determination of effect of solar heating American Society of Agricultural and Biological Engineers ASABE is a professional and technical organization, of
2、 members worldwide, who are dedicated to advancement of engineering applicable to agricultural, food, and biological systems. ASABE Standards are consensus documents developed and adopted by the American Society of Agricultural and Biological Engineers to meet standardization needs within the scope
3、of the Society; principally agricultural field equipment, farmstead equipment, structures, soil and water resource management, turf and landscape equipment, forest engineering, food and process engineering, electric power applications, plant and animal environment, and waste management. NOTE: ASABE
4、Standards, Engineering Practices, and Data are informational and advisory only. Their use by anyone engaged in industry or trade is entirely voluntary. The ASABE assumes no responsibility for results attributable to the application of ASABE Standards, Engineering Practices, and Data. Conformity does
5、 not ensure compliance with applicable ordinances, laws and regulations. Prospective users are responsible for protecting themselves against liability for infringement of patents. ASABE Standards, Engineering Practices, and Data initially approved prior to the society name change in July of 2005 are
6、 designated as “ASAE“, regardless of the revision approval date. Newly developed Standards, Engineering Practices and Data approved after July of 2005 are designated as “ASABE“. Standards designated as “ANSI“ are American National Standards as are all ISO adoptions published by ASABE. Adoption as an
7、 American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by ASABE. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly
8、 and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. CAUTION NOTICE: ASABE and ANSI standards may b
9、e revised or withdrawn at any time. Additionally, procedures of ASABE require that action be taken periodically to reaffirm, revise, or withdraw each standard. Copyright American Society of Agricultural and Biological Engineers. All rights reserved. ASABE, 2950 Niles Road, St. Joseph, Ml 49085-9659,
10、 USA, phone 269-429-0300, fax 269-429-3852, hqasabe.org S T A N D A R D ASABE/ISO 14269-3:1997 (SEP2006) (R2017) Copyright American Society of Agricultural and Biological Engineers 1ASABE/ISO 14269-3:1997 (SEP2006) (R2017) Approved October 2006; reaffirmed January 2017 as an American National Standa
11、rd Tractors and self-propelled machines for agriculture and forestry Operator enclosure environment Part 3: Determination of effect of solar heating These materials are subject to copyright claims of ISO and ASABE. No part of this publication may be reproduced in any form, including an electronic re
12、trieval system, without the prior written permission of ASABE. All requests pertaining to ASABE/ISO 14269-3:1997 (SEP2006) standard should be submitted to ASABE. This standard was reviewed for adoption by the ASABE Power and Machinery Agricultural Machinery Common Tests Technical subcommittee, and h
13、as been formally approved by the Technical Committee. The adoption of this standard was made possible by the signing of 2004 SAE-ASABE copyright agreements, which gave ASABE a royalty-free license to publish in whole or in part SAE standard document J1503. Adopted and approved as an American Nationa
14、l Standard October 2006; reaffirmed by January 2012; January 2017. Keywords: Enclosure, Environment, Operator 0 Foreword 0.1 ASABE/ISO 14269-3:1997, Tractors and self-propelled machines for agriculture and forestry Operator enclosure environment Part 3: Determination of effect of solar heating, is a
15、n adoption without modification of the identically titled ISO standard ISO 14269-3:1997, Tractors and self-propelled machines for agriculture and forestry Operator enclosure environment Part 3: Determination of effect of solar heating. This ISO standard is a derivative of SAE J1503, Performance Test
16、 for Air-Conditioned, Heated, and Ventilated Off-Road Self-Propelled Work Machines. 0.2 ASABE/ISO 14269-3 specifies a test method for simulating solar heating in the laboratory and measuring the radiant heat energy from a natural or simulated source. This standard is applicable to tractors and self-
17、propelled machines for agriculture and forestry when equipped with an operator enclosure. 0.3 One normative reference is listed in ISO 14269-3:1997. This reference has been reviewed and accepted as part of the adoption of ASABE/ISO 14269-3:1997. 0.4 This standard has been approved as an American Nat
18、ional Standard by ANSI (American National Standards Institute). Text of ISO 14269-3:1997, Tractors and self-propelled machines for agriculture and forestry Operator enclosure environment Part 3: Determination of effect of solar heating, follows. 1 Scope This part of ISO 14269 specifies a test method
19、 for simulating solar heating in the laboratory and measuring the radiant heat energy from a natural or simulated source. This standard is applicable to tractors and self-propelled machines for agriculture and forestry when equipped with an operator enclosure. ASABE/ISO 14269-3:1997 (SEP2006) (R2017
20、) Copyright American Society of Agricultural and Biological Engineers 22 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this part of ISO 14269. At the time of publication, the edition indicated was valid. All standards a
21、re subject to revision, and parties to agreements based on this part of ISO 14269 are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 14269-1:1997,
22、 Tractors and self-propelled machines for agriculture and forestry Operator enclosure environment Part 1: Vocabulary. 3 Definitions For the purposes of this part of ISO 14269, the definitions given in ISO 14269-1 apply, of which the following are particularly relevant. 3.1 solar heating: Heating fac
23、tor from the sun to be considered in determining air circulation and cooling requirements necessary to maintain comfortable temperature inside the operator enclosure. ISO 14269-1:1997, definition 2.18 3.2 solar radiant energy: Process by which solar heating is generated. ISO 14269-1:1997, definition
24、 2.19 4 General 4.1 The intended result of this method is to record the radiant heat energy affecting an operator enclosure during tests of the air-conditioning system. 4.2 This method should be used in conjunction with the test given in ISO 14269-2:1997, Tractors and self-propelled machines for agr
25、iculture and forestry Operator enclosure environment Part 2: Heating, ventilation and air-conditioning test method and performance. 5 Measurement of solar radiant energy during field tests 5.1 Place an appropriate measuring device such as a pyranometer, with an accuracy of 6 3% of the observed value
26、s, in the same general area as the operator enclosure under test. Measure the radiance at 10 min intervals during the test period. These readings shall be averaged and recorded as part of the reported results. 5.2 A measured average solar radiant energy of 950 W/m2 95 W/m2is considered normal test c
27、onditions. 6 Method of simulating solar radiant energy during laboratory tests 6.1 Place the lamps in banks above the operator enclosure being tested and in a horizontal plane. 6.2 The area within the perimeter of the light banks shall extend 25% beyond the projected area of the operator enclosure u
28、nder test when measured in all four directions. 6.3 In order to simulate the effects of solar heating, the light source shall have 45% or more of its radiated energy above 700 nm. It is recommended that the method of controlling the intensity not change the spectral distribution of the lamps. ASABE/
29、ISO 14269-3:1997 (SEP2006) (R2017) Copyright American Society of Agricultural and Biological Engineers 37 Calibration of solar radiant energy from a simulated source 7.1 Mount a pyranometer on a tripod and maintain it on a horizontal plane. 7.2 The plane of measurement shall be 100 mm 100 mm lower t
30、han the roof line of the operator enclosure under test. 7.3 Take readings at points on or within the perimeter of the area of uniform intensity as shown in Figure 1. Make sufficient measurements to ensure uniformity. The maximum distance between measuring points shall be 1 200 mm. 7.4 The intensity
31、level shall be adjusted to an average of 950 W/m2 95 W/m2. No individual reading shall vary by more than 10% from the average. 7.5 The intensity level shall be recalibrated every six months or every time the elevation of the roof line of the operator enclosure being tested is changed. NOTE: x and y are dimensions of the largest enclosure to be tested. Figure 1 Area of uniform intensity
