1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C78.1199-2016 Electric Lamps Single-Capped Fluorescent Lamps Safety SpecificationsANSI C78.1199-2016 Page 1 2016 National Electrical Manufacturers Association ANSI C78.1199-2016 American National Standard for Electric Lamps
2、Single-Capped Fluorescent Lamps Safety Specifications Secretariat: National Electrical Manufacturers Association Approved: June 30, 2016 American National Standards Institute, Inc. 2016 National Electrical Manufacturers Association NOTICE AND DISCLAIMER The information in this publication was consid
3、ered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. ANSI standards and guid
4、eline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While NEMA admini
5、sters the process to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and guideline publications. NEMA
6、disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty
7、or warranty, expressed or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any indi
8、vidual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by an
9、y person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic co
10、vered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this document. NEMA does not certify, t
11、est, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health- or safety-related information in this document shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the st
12、atement. ANSI C78.1199-2016 Page i 2016 National Electrical Manufacturers Association AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by The American National Standards Institute, Inc. (ANSI) that the requirements for due process, consensus, and other crite
13、ria for approval have been met by the standards developer. An American National Standard implies a consensus of those substantially concerned with its scope and provisions. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by
14、 directly, and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The existence of an American Nationa
15、l Standard does not in any respect preclude anyone, whether s/he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. It is intended as a guide to aid the manufacturer, the consumer, and the general
16、public. The American National Standards Institute, Inc., does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of
17、the American National Standards Institute, Inc. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on this title page. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Stand
18、ards Institute, Inc., require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute, Inc. Published by National Elect
19、rical Manufacturers Association 1300 North 17thStreet, Suite 900 Rosslyn, Virginia 22209 2016 National Electrical Manufacturers Association All rights, including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary a
20、nd Artistic Works, and the International and Pan American copyright conventions. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher. Printed in the United States of America ANSI C78.1199-2016 Pa
21、ge ii 2016 National Electrical Manufacturers Association Foreword (This foreword is not part of ANSI C78.1199-2016) Suggestions for improvement of this standard should be submitted to the C78 Secretariat, NEMA, 1300 North 17thStreet, Suite 900, Arlington, Virginia 22209. This American National Stand
22、ard has been approved by the ANSI Accredited Standards Committee, C78. Approval of the standard does not necessarily imply that all members voted for approval.ANSI C78.1199-2016 Page iii 2016 National Electrical Manufacturers Association CONTENTS Foreword . ii 1 Introduction. 1 2 Deviations to Norma
23、tive References . 1 3 Deviations to Annex H . 1 ANSI C78.1199-2016 Page iv 2016 National Electrical Manufacturers Association ANSI C78.1199-2016 Page 1 2016 National Electrical Manufacturers Association 1 Introduction The American National Standards ASC C78 adopts IEC 61199, ed 3.2 (2014-07) as a Na
24、tionally Acknowledged International Standard with deviations given in clauses 2 and 3 below. 2 Deviations to Normative References The following ANSI standards are added to clause 2, normative references, and may be substituted for the counterpart IEC standard when it is referenced in the text. When
25、these standards are superseded by a revision approved by American National Standards Institute the revision shall apply: ANSI C81.61-2017 American National Standard for Electrical Lamp BasesSpecifications for Bases (Caps) for Electric Lamps ANSI C81.62-2017 American National Standard for Electric La
26、mpholders ANSI C81.63-2007 (R2014) American National Standard for Gauges for Electric Lamp Bases and Lampholders ANSI C81.64-2005 (R2014) American National StandardGuidelines and General Information for Electrical Lamp Bases, Lampholders and Gauges ANSI C82.1-2004 (R2008, R2015) American National St
27、andard for Lamp BallastsLine Frequency Fluorescent Lamp Ballasts ANSI C82.11-2011 American National Standard for Lamp BallastsHigh Frequency Fluorescent Lamp Ballasts ANSI C78.901-2014 American National Standard for Electric LampsSingle-Based Fluorescent LampsDimensional and Electrical Characteristi
28、cs ANSI/IESNA RP27.1-05 Photobiological Safety for Lamps and Lamp SystemsGeneral Requirements ANSI/IESNA RP27.2-00 (R2011) Photobiological Safety for Lamps and Lamp SystemsMeasurement Systems ANSI/IESNA RP27.3-07 Photobiological Safety for Lamps and Lamp SystemsRisk Group Classification and Labeling
29、 3 Deviations to Annex H Modify the clause H.2 to the following: H.2 Lamp end temperature under abnormal operating conditions The following applies to all lamps in this standard with a bulb diameter of T5 or less: In the case where a lamp does not start, any continuation of cathode heating shall not
30、 lead to overheating of the lamp ends. ANSI C78.1199-2016 Page 2 2016 National Electrical Manufacturers Association In the case where one of the electrodes is depleted or broken when operating on high frequency electronic ballasts, while the lamp continues to operate (partial rectification) overheating of the lamp ends should be prevented by suitable measures in the circuit. NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB
