ANSI NEMA C80.3-2015 Electrical Metallic Tubing Steel (EMT-S) Secretariat National.pdf

上传人:twoload295 文档编号:437612 上传时间:2018-11-14 格式:PDF 页数:17 大小:314.24KB
下载 相关 举报
ANSI NEMA C80.3-2015 Electrical Metallic Tubing Steel (EMT-S) Secretariat National.pdf_第1页
第1页 / 共17页
ANSI NEMA C80.3-2015 Electrical Metallic Tubing Steel (EMT-S) Secretariat National.pdf_第2页
第2页 / 共17页
ANSI NEMA C80.3-2015 Electrical Metallic Tubing Steel (EMT-S) Secretariat National.pdf_第3页
第3页 / 共17页
ANSI NEMA C80.3-2015 Electrical Metallic Tubing Steel (EMT-S) Secretariat National.pdf_第4页
第4页 / 共17页
ANSI NEMA C80.3-2015 Electrical Metallic Tubing Steel (EMT-S) Secretariat National.pdf_第5页
第5页 / 共17页
亲,该文档总共17页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C80.3-2015Electrical Metallic TubingSteel (EMT-S)ANSI C80.3-2015 American National Standard for Electrical Metallic TubingSteel (EMT-S) Secretariat: National Electrical Manufacturers Association Approved: December 14, 2015 A

2、merican National Standards Institute, Inc. ANSI C80.3-2015 Page ii NOTICE AND DISCLAIMER The information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessari

3、ly mean that there is unanimous agreement among every person participating in the development of this document. American National Standards Institute, Inc., (ANSI) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standar

4、ds development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While NEMA administers the process to promote fairness in the development of consensus, it does not write the document and it does not

5、independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, ind

6、irect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims

7、 and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this d

8、ocument available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as

9、 appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views o

10、r information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement

11、of compliance with any health- or safety-related information in this document shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the statement. 2015 National Electrical Manufacturers Association ANSI C80.3-2015 Page i 2015 National Electrical Manufacturer

12、s Association AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by The American National Standards Institute, Inc. (ANSI) that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. An American N

13、ational Standard implies a consensus of those substantially concerned with its scope and provisions. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly, and materially affected interests. Substantial agreement mean

14、s much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The existence of an American National Standard does not in any respect preclude anyone, whether s/he has app

15、roved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. It is intended as a guide to aid the manufacturer, the consumer, and the general public. The American National Standards Institute, Inc., does not develo

16、p standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute, Inc. Requests for interpretat

17、ions should be addressed to the secretariat or sponsor whose name appears on this title page. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute, Inc., require that action be taken periodically to reaff

18、irm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute, Inc. Published by National Electrical Manufacturers Association 1300 North 17thStreet, Suite 900 Rosslyn

19、, VA 22209 2015 National Electrical Manufacturers Association All rights reserved including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American Copyright Co

20、nventions. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America ANSI C80.3-2015 Page ii 2015 National Electrical Manufacturers Association ANSI C80.3-2

21、015 Page iii 2015 National Electrical Manufacturers Association CONTENTS Page 1 Scope 1 2 Normative References . 1 3 Definitions 2 4 Units of Measurements . 2 5 General Requirements. 2 5.1 Circular cross section . 2 5.2 Wall Thickness 2 5.3 Interior surface 2 5.4 Welding . 2 5.5 Cleaning 2 5.6 Prote

22、ctive coating for corrosion resistance 2 5.7 Surface treatment . 2 6 Detailed Requirements 3 6.1 Exterior coating . 3 6.1.1 Zinc Coating 3 6.1.2 Alternate corrosion resistant coating (ACRC) . 3 6.2 Interior coating 3 6.3 Chamfering . 3 6.4 Identification 3 6.5 Dimensions . 3 6.6 Elbows 3 7 Test Proc

23、edures . 3 7.1 Bending properties 3 7.1.1 Ductility of steel . 3 7.1.2 Ductility of coatings at ambient temperature . 3 7.2 Thickness of zinc coating . 4 7.3 Alternate corrosion resistant coatings (ACRC) . 4 7.4 Performance requirement of organic coating for use on interior surface . 4 8 Examination

24、 of Product. 4 8.1 Place of inspection 4 8.2 Visual inspection of tubing 4 8.3 Visual inspection of elbows 4 8.4 Retest . 5 9 Markings . 5 9.1 General . 5 9.2 Nonmetallic alternate corrosion resistant coating temperature marking 5 ANSI C80.3-2015 Page iv 2015 National Electrical Manufacturers Associ

25、ation 9.3 Supplementary coating marking . 5 TABLES Table 1 Dimensions and weights for EMT-S . 6 Table 2 Minimum dimensions for 90-degree elbows 7 ANSI C80.3-2015 Page v 2015 National Electrical Manufacturers Association Foreword (This foreword is not part of American National Standard C80.3-2015.) T

26、his standard was developed by the Accredited Standards Committee on Raceways for Electrical Wiring Systems, C80. The objective of the committee is to produce a comprehensive specification that would establish uniform dimensions and standard construction requirements for electrical rigid steel condui

27、t, steel electrical metallic tubing, electrical intermediate metal conduit, and electrical aluminum rigid conduit raceway products and their associated components. The standard was originally approved in 1950 and revised in 1953, 1959, 1963, 1966, 1977, 1983, 1991, 1994, 2005, and 2015. Suggestions

28、for improvement of this standard will be welcomed. They should be sent to the National Electrical Manufacturers Association, 1300 North 17th Street, Suite 900, Rosslyn, Virginia 22209. This standard was processed and approved for submittal to ANSI by the Accredited Standards Committee (ASC) on Racew

29、ays for Electrical Wiring Systems, ASC C80. Committee approval of the standard does not necessarily imply that all committee members voted for its approval. At the time it approved this standard, the C80 Committee comprised the following members: M. J. Brett, Jr., Chair J. G. Solis, Secretary Organi

30、zations Represented Name of Representative Western Tube & Conduit Corporation J. Bloom Republic Conduit P. Douglas Wheatland Tube Company M. J. Brett, Jr. International Association of Electrical Inspectors D. Humphrey International Brotherhood of Electrical Workers P. Hickman National Electrical Con

31、tractors Association M. Johnston Appleton Group S. Blais Allied Tube & Conduit, a part of Atkore International E. Thompson Allied Tube & Conduit, a part of Atkore International R. Horner R & N Associates R. Loyd SAPA Extrusion North America H. E. Harper, Jr. The following members of the NEMA Steel C

32、onduit & Electrical Metallic TubingCodes/Communications/Technical Committee worked on this standard prior to its publication: J. Burris, Co-Chair R. Horner, Co-Chair J. G. Solis, Secretary J. Andre J. Bloom M. Brett P. Douglas L. Easter D. Kendall C. Leonardo-Javier R. Loyd D. Markus R. Szkola E. Th

33、ompson C. Wood M. Ziegler ANSI C80.3-2015 Page vi 2015 National Electrical Manufacturers Association ANSI C80.3-2015 Page 1 2015 National Electrical Manufacturers Association 1 Scope This standard covers the requirements for steel electrical metallic tubing, for use as a raceway for wires or cables

34、of an electrical system. Finished tubing is typically furnished in nominal 10-ft (3.05-m) lengths. It is protected on the exterior surface with a metallic zinc coating or alternate corrosion protection coating (see UL 797 for alternate corrosion protection coating requirements) and on the interior s

35、urface with a zinc or organic coating. This standard also covers electrical metallic tubing elbows. Properly assembled systems of EMT-S, manufactured in accordance with this standard, and other identified fittings provide for the electrical continuity required of an equipment grounding conductor. 2

36、Normative References The following standards contain provisions that, through reference in this text, constitute requirements of this American National Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on t

37、his American National Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below unless otherwise specified. ASTM A239 14 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles 1, 2 A

38、STM B117 11 Standard Practice for Operating Salt Spray (Fog) Apparatus ASTM B499 96 (2002) Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals ASTM B499 -09 Standard Test Method for Measurement of Coating Thicknesses by th

39、e Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals ASTM D638 14 Standard Test Method for Tensile Properties of Plastics ASTM D1654 08 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments ASTM D2444 99(2010) Standard Test Method for Dete

40、rmination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) ASTM D3359 09e2 Standard Test Methods for Measuring Adhesion by Tape Test ASTM G151 10 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light S

41、ources ASTM G153 13 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials ASTM G155 13 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials UL 797 Electrical Metallic Tubing Steel ANSI C80.3-2015 Page 2 20

42、15 National Electrical Manufacturers Association 3 Definitions 3.1 Electrical metallic tubingsteel (EMT-S): A steel raceway of circular cross section designed for the physical protection and routing of conductors and cables for use as an equipment grounding conductor. 3.2 Elbow: A manufactured curve

43、d section of EMT. 3.3 Alternate corrosion resistant coating (ACRC): A coating, other than one consisting solely of zinc, that, upon evaluation, has demonstrated the ability to provide the level of corrosion resistance required on the exterior of tubing. It is not prohibited that the coatings include

44、 zinc. (See UL 797.) 4 Units of Measurements The values stated in English units are to be regarded as the standard. The metric (SI) units are exact conversions. 5 General Requirements 5.1 Circular cross section EMT-S shall have a circular cross section sufficiently accurate to permit the application

45、 of identified EMT-S fittings. 5.2 Wall thickness The wall thickness shall be uniform throughout. 5.3 Interior surface The interior surface shall be smooth and free from injurious defects that compromise the intended use of the electrical raceway. 5.4 Welding The welding of all seams shall be contin

46、uous and done in a workmanlike manner. 5.5 Cleaning The tubing shall be adequately cleaned before the application of the protective coating. The cleaning process shall leave the exterior and interior surfaces of the tubing in such a condition that the protective coating shall be smooth and adhere fi

47、rmly. 5.6 Protective coating for corrosion resistance 5.6.1 The exterior surface shall be either thoroughly and evenly coated with metallic zinc or protected with an ACRC. 5.6.2 The interior surface shall be protected by a zinc or organic coating. The interior coating shall have a smooth continuous

48、surface. An occasional variation due to uneven flow of coating shall be acceptable. 5.7 Surface treatment Any surface treatment not exceeding 0.00015 inch (0.0038 mm) that is employed as a topcoat or conversion coating is not required to meet the requirements for an ACRC or organic coating. ANSI C80

49、.3-2015 Page 3 2015 National Electrical Manufacturers Association 6 Detailed Requirements 6.1 Exterior coating 6.1.1 Zinc coating The zinc coating thickness on the outside surface shall be equivalent to a minimum thickness of 0.0008 in. (0.02 mm), as tested in accordance with 7.2. 6.1.2 Alternate corrosion resistant coating (ACRC) (See UL 797.) 6.2 Interior coating 6.2.1 The zinc coating shall be tested in accordance with 7.1.2. 6.2.2 The organic coating shall not soften at a temperature of 120F (49C) and shall be sufficiently elastic to c

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1