1、 TIA/EIA STANDARD Cellular Digital Packet Data (CDPD) System Specification CS CDPD Accounting Service and Protocol TIA/EIA-732-1026 (Upgrade of TIA/EIA/IS-732-1026) JULY 2001 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of A
2、NSI/TIA/EIA-732-1026-2001 Approved: June 8, 2001 TIA/EIA-732-1026 NOTICE TIA/EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, a
3、nd assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA/EIA from manufacturing or selling products not conforming to such Standar
4、ds and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA/EIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by TIA/EIA in accordance with the Americ
5、an National Standards Institute (ANSI) patent policy. By such action, TIA/EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with i
6、ts use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 4033-1026-UG, formulated under the co
7、gnizance of the TIA TR-45.6 Subcommittee on Adjunct Data Packet Wireless Technology.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2001 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 PRICE: Please refer to current Catalog of EIA ELECTRONIC INDUSTRIES ALLIANCE S
8、TANDARDS and ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) All rights reserved Printed in U.S.A. PLEASE! DONT VIOLATE THE LAW! This document is copyrighted by the TIA and may not be reproduced without permission. Organizat
9、ions may obtain permission to reproduce a limited number of copies through entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 or call U.S.A. and Canada 1-800-854-7179, International (303) 397-7956 1026iTIA/EIA-732-
10、1026123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960ContentsSECTION 100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1026-11 Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11、 . . . . . . . . . . . . . . . . . . . . 1026-12 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1026-2SECTION 400 Accounting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1026-31 Introduction . . . . . . . . .
12、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1026-32 Identifying the NEI for which Connection Time Accounting Information will be Recorded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1026-33 Traffic Matrix Segment Modifications . . . . . . . . . . .
13、 . . . . . . . . . . . . . 1026-43.1 TMS Key Definition Field Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-43.1.1 Cell-Identifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-43
14、.1.2 Equipment ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-43.2 CS Connection Time Rows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-43.2.1 Temporary Connection ID (T
15、CI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-63.2.2 CS ConnectionTime Row Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-63.2.3 Start Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16、 . . . . . . . . . . . . . . . . . . . . . .1026-73.2.4 Modem Training Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-73.2.5 CM-ES Duration Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17、 . .1026-73.2.6 Connection Duration Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-73.2.7 CS-MB Trunk Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-83.2.8 CMES-IsOriginator . . .
18、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-83.2.9 AMPS System ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-83.2.10 Mobile Identification Number . . . . . . . . . . . . . .
19、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-83.2.11 Dialed Number Identifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-93.2.12 Automatic Number Identifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20、. . . . . . . . . .1026-93.2.13 Carrier Identification Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-93.2.14 Trunk Identifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-93.2.
21、15 Registration Only Flag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-93.2.16 Denial Reason Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-94 Accounting Meter Changes . . . . .
22、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1026-104.1 Reporting Trigger Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1026-104.2 TMS Generation Walkthrough . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23、 . . . . . . .1026-115 HAS, HAD, HAC, CAS and CAC Changes . . . . . . . . . . . . . . . . . . . . . 1026-126 CS CDPD and CDPD Coexistence . . . . . . . . . . . . . . . . . . . . . . . . . . . 1026-136.1 Sending TMSs and HASs from a CDPD System to a CS CDPD system . . . . . . . . . . . . .1026-136.2
24、Sending TMSs and HASs from a CS CDPD System to a CDPD system . . . . . . . . . . . . .1026-13TIA/EIA-732-10261026ii1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859607 CDPD ASN-1 Module . . . . . . . . . . . . . . . . . . . . . . . . . . .
25、. . . . . . . . . . . . 1026-141026iii123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960TIA/EIA-732-1026PART 1026 CS CDPD Accounting Service and ProtocolForewordThis foreword is not part of the StandardThis Standard has been produced by th
26、e TR-45.6 Subcommittee of the TIA/EIA/TR-45 Committee.This document contains significant portions of material originally submitted by the Cellular Digital Packet Data Forum Inc.This document set constitutes the Cellular Digital Packet Data (CDPD) System Specification. CDPD is a technology intended t
27、o provide packet data networking services to mobile hosts. The media used to provide these services consists of radio channels typically used for Advanced Mobile Phone System (AMPS) cellular service.Document StructureThis Standard is published as a series of Parts. Each Part contains information per
28、taining to one aspect of the system.The functional structure of the Cellular Digital Packet Data System Specification is as follows:a71 Introduction and OverviewTIA/EIA-732-1026 CS CDPD Accounting Service and Protocol1026iv12345678910111213141516171819202122232425262728293031323334353637383940414243
29、4445464748495051525354555657585960This document provides an overview of the CDPD Network and serves as a guide to the remainder of the system specification for specific detailed information.In this Part, design objectives are described and are followed by the design concepts used to realize the stat
30、ed objectives. The resultant network is then described in terms of its external interfaces, major network elements and network services. A listing of key identifiers in CDPD is then followed by a comprehensive glossary of CDPD terms and a reference list of non-CDPD documents.This Part contains the d
31、etailed listing of all Parts of the Cellular Digital Packet Data Specifications.a71 Part 300 to Part 799Protocols and InterfacesThese Parts form the heart of the CDPD System Specification. They define the communications architecture of CDPD, including communications layer entities, services, protoco
32、l stacks, the three key interfaces, Radio Resource Control, Mobility Management, Accounting Management, Support Services and Network Management.a71 Part 800 to Part 899Supplementary Protocol InformationThese Parts contain further specification of the primary CDPD protocols. State transition matrices
33、 are used to define protocol state machines, and Protocol Implementation Conformance Statements (PICS) are provided for implementors.a71 Part 900 to Part 999Protocol Test SpecificationsFollowing an overview of protocol testing, these Parts contain Abstract Test Suites (ATSs) and Protocol Implementat
34、ion eXtra Information for Test (PIXIT) for the protocols specified in Part 300 to Part 799.a71 Part 1000 to Part 1999Guidelines for Service ProvidersThese Parts describe guidelines for CDPD Service Providers.10261123456789101112131415161718192021222324252627282930313233343536373839404142434445464748
35、495051525354555657585960Objectives TIA/EIA-732-1026PART 1026 CS CDPD Accounting Service and ProtocolSECTION 100 IntroductionA Circuit Switched Mobile End System (CM-ES) can use the local AMPS system as an extension of the CDPD network if Circuit Switched CDPD service is provided in the cellular cove
36、rage area. Implementor Guideline TIA/EIA-732-1024, TIA/EIA-732-1025 and TIA/EIA-732-1026 specify the procedures and data communications necessary for a CM-ES to access CDPD service using an AMPS cellular system or land line connection where Circuit Switched CDPD service is available.1 ObjectivesTIA/
37、EIA-732 Part 1024, Part 1025 and Part 1026 provide the protocols and specification necessary for vendors and Service Providers to implement CS CDPD and integrate with the existing CDPD environment. In providing these protocols and specifications, the requirements are divided into three main areas:a7
38、1 TIA/EIA-732-1024 provides specifications for Circuit Switched Mobile End System (CM-ES) and Circuit Switched Mobile Data Intermediate System (CMD-IS) vendors who are implementing equipment intended to support the Circuit Switched CDPD (CS CDPD) service.TIA/EIA-732-1026 Introduction1026212345678910
39、1112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960a71 TIA/EIA-732-1025 provides specifications for Circuit Switched Modem Bank (CS-MB) vendors and Circuit Switched Mobile Data Intermediate System (CMD-IS) vendors who are implementing CS CDPD solution
40、s which utilize a modem bank as a data link layer relay function between a CM-ES and CMD-IS.a71 This Part provides the Accounting Service and Protocol specification for CMD-IS vendors and the developers of Serving Accounting Distributor, Home Accounting Distributor and Consolidation Accounting Distr
41、ibutor functions for the CS CDPD environment.2 ScopeThis Part is directed toward Circuit Switched Cellular Digital Packet Data (CS CDPD) Service Providers intending to build or purchase equipment for use in the CS CDPD internal network. This Part affects serving CMD-IS manufacturers, home CMD-IS and
42、 home MD-IS manufacturers, Modem Bank manufacturers and the developers of Serving Accounting Distributor, Home Accounting Distributor and Consolidation Accounting Distributor functions for the CS CDPD environment. This Part does not directly affect CS CDPD subscribers or Circuit Switched Mobile End
43、System (CM-ES) manufacturers.10263Introduction TIA/EIA-732-1026123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960SECTION 400 Accounting Service1 IntroductionIn order to support accounting services in a CS CDPD environment, the following ad
44、ditional areas are addressed.1. Connection time is recorded in order to provide service providers with the option of integrated billing based on connection time as well as an audit mechanism for voice call records.2. A distinction is made between CM-ESs that initiate a physical connection for regist
45、ration purposes only, termed “Registration Only” CM-ES, versus CM-ESs that initiate a physical connection to exchange data with an F-ES.3. Invalid or fraudulent attempts to establish a CS CDPD connection are recorded.Every effort has been made to minimize the modifications to CDPD. Except where note
46、d, the requirements, concepts and definitions provided in TIA/EIA-732-630 apply to CS CDPD. In the discussion that follows, reference is made to modem bank functionality as described in TIA/EIA-732-1025. A CMD-IS manufacturer can choose to physically integrate within the CMD-IS the functionality des
47、cribed in Part 1025. Such an implementation does not change the requirements described within the remainder of this section.2 Identifying the NEI for which Connection Time Accounting Information will be RecordedAll connection time accounting will be associated with the first NEI registered by a CM-E
48、S, regardless of the order in which subsequent registrations or deregistrations of NEIs occur (including deregistration of the first NEI registered). Likewise, in the case of suspended sessions that are resumed, all connection time accounting will be based on the first NEI registered during the init
49、ial connection. The first NEI is defined as the first NEI associated with a CM-ES that has been succesfully registered in the Mobile Serving Functions Registration Directory within the CMD-IS as described in TIA/EIA-732-501.TIA/EIA-732-1026 Accounting Service102641234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859603 Traffic Matrix Segment ModificationsA new TMS row type is introduced as discussed in “CS Connection Time Rows”. These new TMS rows provide CS CDPD specific accounting information.Traffic Matrix Segments of t
