ANSI TIA-598-C-2005 Color Coding of Fiber Optic Cables《光缆色码》.pdf

上传人:wealthynice100 文档编号:438629 上传时间:2018-11-14 格式:PDF 页数:32 大小:155.27KB
下载 相关 举报
ANSI TIA-598-C-2005 Color Coding of Fiber Optic Cables《光缆色码》.pdf_第1页
第1页 / 共32页
ANSI TIA-598-C-2005 Color Coding of Fiber Optic Cables《光缆色码》.pdf_第2页
第2页 / 共32页
ANSI TIA-598-C-2005 Color Coding of Fiber Optic Cables《光缆色码》.pdf_第3页
第3页 / 共32页
ANSI TIA-598-C-2005 Color Coding of Fiber Optic Cables《光缆色码》.pdf_第4页
第4页 / 共32页
ANSI TIA-598-C-2005 Color Coding of Fiber Optic Cables《光缆色码》.pdf_第5页
第5页 / 共32页
亲,该文档总共32页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、 TIA STANDARD Optical Fiber Cable Color Coding TIA-598-C (Revision of TIA/EIA-598-B) January 2005 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance ANSI/TIA-598-C-2005 Approved: January 13, 2005 Copyright Telec

2、ommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufa

3、cturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member o

4、r non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted

5、 by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all

6、safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-35

7、55-RV3-A, formulated under the cognizance of the TIAFO-4.2 Subcommittee on Optical Fibers and Cables). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2004 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMM

8、UNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserved Printed in U.S.A. Copyright Telecommu

9、nications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on

10、the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/about/f

11、aqDetail.cfm?id=18 OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any ed

12、iting process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pe

13、nding patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. T

14、IA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practi

15、ces suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of complian

16、ce with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY

17、THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTEN

18、TS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT,

19、SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

20、 THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networkin

21、g permitted without license from IHS-,-,-TIA-598-C iOptical Fiber Cable Color Coding Contents Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22、. . . . . . . . . . . . . . 12 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Fiber, unit, and group color coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Color coding of premises fiber optic cable . . . . . . . . . . . .

23、 . . . . . . . . . . . . 95 Cable and wire color control and limits. . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Color permanence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Annex A (normative), Optical premises cable definitions. . . . . . . .

24、. . . . . . . . . . . 14Annex B (informative), Optical premises cable jacket colors. . . . . . . . . . . . . . . . 15Annex C (informative), Alternative color scheme. . . . . . . . . . . . . . . . . . . . . . . . . 16Annex D (informative), Wire and cable Munsell limit chips from EIA 359-A . . . . 18A

25、nnex E (informative), Munsell component limits for Rose and Aqua . . . . . . . . . 20Annex F (informative), Comparison between TIA-598 and IEC and ITU requirements 21Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking pe

26、rmitted without license from IHS-,-,-TIA-598-C iiThis page left blank. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-598-C iiiFOREWORD (This foreword is not part of this S

27、tandard.) This Standard provides all necessary information for color coding optical fiber cables in a uniform manner. This Standard was formulated as TIA Standards Proposal number 3555 under the cognizance of TIA FO-4.2, Subcommittee on Optical Fibers and Cables, formerly TIA FO-6.7, Subcommittee on

28、 Optical Fiber Cables, by former Working Group FO-6.7.10, Color Coding.This issue replaces the previous issue of ANSI/EIA/TIA Standard 598 dated 2001. Changes include the following: designation of Aqua (AQ) as jacket color for indoor cable containing laser-optimized (LO) 50/125 m MM optical fiber de

29、signation of Blue (BL) as jacket color for indoor cable containing polarization maintaining fiber Expanding the color definition for Slate (SL), and Adding color definitions from ANSI/EIA Standard 359-A, Colors for Color Identification and Coding, for reference. This Standard contains six annexes. A

30、nnex A is normative and is considered part of this Standard. Annexes B, C, D, E, and F are informative and are not considered part of this Standard. Key words: fiber identification, color identification, identification scheme Copyright Telecommunications Industry Association Provided by IHS under li

31、cense with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-598-C ivThis page left blank. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-

32、,-TIA-598-C 1Optical Fiber Cable Color Coding 1 Scope This standard defines the recommended identification scheme or system for individual fibers, fiber units, and groups of fiber units within a cable structure. The methods contained herein may be used to identify and locate specific fibers for the

33、purpose of connection, termination, or testing within a communication system or for the topography of long haul, feeder route, subscriber, or distribution applications for both on-premises and outside plant use. This standard also defines the optical fiber type identification scheme for color coding

34、 or marking jackets for premises cables used primarily indoors. Cables with colored jackets are typically used only in intrabuilding applications and must be listed to a level of fire resistance specific to their use. The jacket materials used can be colored for identification purposes. Conversely,

35、most cables deployed outdoors must incorporate additives in the jacket material to be able to withstand the damaging effects of solar radiation over their designed operating lifetime. Such products typically contain carbon black material to provide the requisite level of protection, which precludes

36、the use of any jacket color other than black. Although color-compatible materials designed to resist solar radiation are available for outdoor use, and other means for color-coding black jackets are possible (i.e., colored striping), the use of such materials and methods are beyond the scope of this

37、 standard. 2 Normative references The following standards contain provisions which, through references in this text, constitute provisions of this Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this S

38、tandard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. ANSI and TIA maintain registers of currently valid national standards published by them. ANSI/EIA-359-A-1988 EIA Standard Colors for Color Identification and Coding ANSI/TIA/E

39、IA-4920000-B-1997 Generic Specification for Optical Fibers Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-598-C 2ANSI/TIA/EIA-492A000-A-1997 Sectional Specification for Cla

40、ss Ia Graded-Index Multimode Optical Fibers ANSI/TIA/EIA-492AAAA-02 Detail specification for 62.5-m core diameter/125-m cladding diameter class Ia graded-index multimode optical fibers ANSI/TIA/EIA-492AAAB-02 Detail specification for 50-m core diameter/125-m cladding diameter class Ia graded-index m

41、ultimode optical fibers ANSI/TIA/EIA-492AAAC-03 Detail specification for 850-nm laser-optimized, 50-m core diameter/125-m cladding diameter class Ia graded-index multimode optical fibers ANSI/TIA/EIA-492C000-1998 Sectional specification for class IVa dispersion-unshifted single-mode optical fibers A

42、NSI/TIA/EIA-49EC000-1996 Sectional specification for class IVd non-zero dispersion single-mode optical fibers for the 1550 nm window ASTM D 1535-2001 Standard Practice for Specifying Color by the Munsell System Munsell Color Charts Munsell Color Charts for Color Coding (Visual Standards for ANSI/EIA

43、-359-A) ANSI/NFPA 70-2002 National Electrical Code IEC 60757-1983 Codes for Designation of Colors IEC 60304-1982 Standard colours for insulation for low-frequency cables and wires 3 Fiber, unit, and group color coding Each individual fiber within a fiber optic cable shall be uniquely identifiable in

44、 terms of its color, unit, group, and/or position. The following scheme applies to cables in which the fibers are physically separated. For cables in which individual fibers are identified by fixed positional configuration (e.g., some ribbon cable, slotted core), this color scheme is preferred but i

45、s not mandatory. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-598-C 33.1 Individual fibers All fibers shall be discernibly and uniquely color coded using the preferred me

46、thod in accordance with one of the alternatives given in Table 1, or the surrogate method given in annex C (informative), Table C-11). The identification may be by coloring, by printed legend, by printed block coding, or by other unique methods meeting the intent of this Paragraph and as agreed upon

47、 by the manufacturer and the user. If a printed legend is used in lieu of actual color coding for identification, the legend shall consist of the numerical position number or the color abbreviation, or both, as listed in Table 1. If printed block coding is used, it shall consist of printed blocks an

48、d bar or hachure marks corresponding to the numerical position. A sample scheme is illustrated in Table 2; this marking scheme may be extended as necessary. 3.2 Fiber units Units are primary groupings of individual fibers. Examples of units include, but are not limited to: buffer tubes which contain

49、 individual fibers; multi-fiber ribbons; fibers bundled by threads or tape; and the slots of slotted-core cables, when the fibers within each slot are not otherwise grouped or connected. When a number of fibers (e.g., 6, 12, 18, or 24) form a unit, the unit shall be uniquely identified in accordance with one of the alternatives given in Table 1 or Table C-1 as described i

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1