ANSI TIA-664.806-2007 Wireless Features Description Over-the-Air Parameter Administration.pdf

上传人:boatfragile160 文档编号:438693 上传时间:2018-11-14 格式:PDF 页数:14 大小:227.63KB
下载 相关 举报
ANSI TIA-664.806-2007 Wireless Features Description Over-the-Air Parameter Administration.pdf_第1页
第1页 / 共14页
ANSI TIA-664.806-2007 Wireless Features Description Over-the-Air Parameter Administration.pdf_第2页
第2页 / 共14页
ANSI TIA-664.806-2007 Wireless Features Description Over-the-Air Parameter Administration.pdf_第3页
第3页 / 共14页
ANSI TIA-664.806-2007 Wireless Features Description Over-the-Air Parameter Administration.pdf_第4页
第4页 / 共14页
ANSI TIA-664.806-2007 Wireless Features Description Over-the-Air Parameter Administration.pdf_第5页
第5页 / 共14页
亲,该文档总共14页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、 TIA-664.806 October 2007Wireless Features Description: Over-the-Air Parameter Administration ANSI/TIA-664.806-2007 APPROVED: OCTOBER 11, 2007 REAFFIRMED: FEBRUARY 4, 2013 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstanding

2、s between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect precl

3、ude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publicat

4、ions are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport

5、 to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No.

6、 SP-3-4652.806-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or an

7、y editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and publishe

8、d pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IP

9、R. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or pr

10、actices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (w

11、hether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any

12、other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR

13、 in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise inves

14、tigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOS

15、E OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE

16、 OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINE

17、D HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR O

18、THERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-664.806 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

19、23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 806-i Contents Wireless Features Description: Over-the-Air Parameter Administration Contents Revision Historyii 1 Over-the-Air Parameter Administration (OTAPA) 1 1.1 Normal Procedures Wi

20、th Successful Outcome.1 1.2 Exception Procedures or Unsuccessful Outcome .2 1.3 Alternative Procedures .3 1.4 Interactions With Other Services3 TIA-664.806 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

21、52 53 54 55 56 57 58 59 60 806-ii Revision History Revision Date Remarks TIA-664.806 September 2007 Initial publication TIA-664.806 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59

22、60 806-1 Over-the-Air Parameter Administration (OTAPA) 1 Over-the-Air Parameter Administration (OTAPA) Over-the-Air Parameter Administration is a network capability that can be used by a service provider to update the NAM or other operational parameters in a subscribers activated OTAPA capable Mobil

23、e Station (MS) over-the-air. OTAPA sessions are initiated autonomously by the network, and proceed without any subscriber involvement or knowledge and with no limitation on the subscribers ability to receive telecommunications services. Applicability to Telecommunications Services OTAPA is applicabl

24、e to all telecommunications services. 1.1 Normal Procedures With Successful Outcome Authorization A service provider may make OTAPA generally available to all its own subscribers who have an OTAPA capable MS, or a service provider may choose to limit OTAPA availability to a service provider determin

25、ed subset of its own subscribers. Deauthorization OTAPA may be withdrawn by the service provider or optionally upon receipt from the MS of an indication that the subscriber has disabled OTAPA. Registration The information needed to unlock the MS or gain access to a NAM within the MS shall be registe

26、red upon authorization at the MS and the network. Deregistration OTAPA shall be deregistered upon deauthorization. Activation OTAPA is activated upon authorization. Deactivation OTAPA is deactivated upon deauthorization. TIA-664.806 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 2

27、6 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Over-the-Air Parameter Administration (OTAPA) 806-2 Invocation OTAPA is invoked by the service provider at any time. Normal Operation with Successful Outcome This section describes a typical seque

28、nce of procedures for an OTAPA session, which results in a successful outcome. a. The service provider invokes OTAPA for an MS. b. The service provider determines that the MS is registered in a cooperating, OTAPA capable Serving System. c. The service provider may unlock the MS, and the MS may authe

29、nticate the network. d. The service provider may transmit parameter values to the MS and/or request the value of parameters previously stored in the MS. Depending on the MSs air interface and the configuration and capabilities of the Serving System, these parameter exchanges may be protected by Sign

30、aling Message Encryption. The parameters that may be downloaded or requested by the service provider also depend on the air interface supported by the MS. For some air interfaces, these parameters may be limited to parameters associated to the active NAM; for others they may include certain global M

31、S parameters. e. Upon command from the service provider, the MS commits downloaded parameters to permanent memory. f. After the OTAPA session is complete, the MS resumes normal operation using the resultant parameter values for its operation. 1.2 Exception Procedures or Unsuccessful Outcome If the M

32、S originates, receives, or ends a call while OTAPA is in progress, the OTAPA session is terminated. If the process of reprogramming an MS via OTAPA terminates before certain parameters have been committed to permanent memory, the MS resumes normal operation using the previously stored values of thos

33、e parameters. Some MSs may allow a subscriber to prevent the MS from being reprogrammed via OTAPA. If a subscriber exercises this capability, attempts to reprogram the MS via OTAPA will fail, and the MS operates normally using the parameter values that had been in effect before the OTAPA session was

34、 attempted. Registration None identified. Deregistration None identified. TIA-664.806 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 806-3 Over-the-Air Parameter Administration

35、 (OTAPA) Activation None identified. Deactivation None identified. Invocation The subscriber is not notified if an attempt to invoke OTAPA fails. There should be no effect on a subscribers ability to operate the MS if the service provider is unable to successfully invoke OTAPA. Exceptions While Roam

36、ing Based on bilateral agreements, a service provider may choose to abort OTAPA sessions for MSs roaming outside of a selected subset of cooperating Serving Systems. Exceptions During Intersystem Handoff OTAPA procedures may be blocked during intersystem handoff by the service provider, depending on

37、 the specific implementation. 1.3 Alternative Procedures None identified. 1.4 Interactions With Other Services No interactions have been identified with the following exceptions: Over-the-Air Parameter Administration (OTAPA) Only a single OTAPA session may be performed with a mobile concurrently. Ov

38、er-the-Air Service Provisioning (OTASP) OTASP takes precedence over OTAPA. OTAPA cannot be performed while OTASP is in progress. (This page intentionally left blank.) THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA represents the global information and communications technology (ICT) industry throug

39、h standards development, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been enhancing the business environment for broadband, wireless, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1