1、 STANDARD FOR SAFETY Recommendations for the Preparation, Content, and Organization of Intrinsic Safety Control Drawings This page intentionally left blank. UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Recommend
2、ations for the Preparation, Content, and Organization of Intrinsic Safety Control Drawings, UL 120202 First Edition, Dated September 8, 2014 Summary of Topics Adoption of ANSI/ISA-12.02.02-2014, Standard for Recommendations for the Preparation, Content, and Organization of Intrinsic Safety Control D
3、rawings, as ANSI/UL 120202. This Standard is being issued to update the title page to reflect the reaffirmation of its ANSI approval. No changes in requirements have been made. As noted in the Commitment of Amendments statement located on the back side of the title page, UL and ISA are committed to
4、updating this co-designated standard jointly after processing according to the standards development procedures by UL These requirements are substantially in accordance with Proposal(s) on this subject dated April 28, 2017. All rights reserved. No part of this publication may be reproduced, stored i
5、n a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard “as is“ without warranty of any kind, either expressed or implied, including but not limited to, the implied warrantie
6、s of merchantability or fitness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if
7、 UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, i
8、ndemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. UL COPYRIGHTED MATERIAL
9、 NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL This page intentionally left blank. UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL ISA - International Society of Automation ANSI/ISA 12.02.02-2014 (R2017)
10、First Edition Underwriters Laboratories Inc. ANSI/UL 120202 First Edition Recommendations for the Preparation, Content, and Organization of Intrinsic Safety Control Drawings September 8, 2014 (Title Page Reprinted: June 30, 2017) ANSI/ISA/UL 120202-2014 (R2017) UL COPYRIGHTED MATERIAL NOT AUTHORIZED
11、 FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by ISA and Underwriters Laboratories Incorporated (UL). Comments or proposals for revisions on any part of the standard may be submitted to UL at any time. ISBN 978-1-945541
12、-62-9 Copyright 2017 ISA All rights reserved. Not for resale. Printed in the United States of America. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means (electronic mechanical, photocopying, recording, or otherwise), without the p
13、rior written permission of the Publisher. The most recent designation of ANSI/ISA-12.02.02 as a Reaffirmed American National Standard (ANSI) occurred on June 30, 2017. Copyright 2017 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy
14、of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the First Edition including revisions through June 30, 2017. The most
15、 recent designation of ANSI/UL 120202 as a Reaffirmed American National Standard (ANS) occurred on June 30, 2017. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, (front and back), or the Preface. Comments or proposals for revisions on any part of the Stan
16、dard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way.
17、All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. To purchase UL Standards, visit http:/ or call toll- free 1-888-853-3503. UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL
