ANSI UL 140-2006 UL Standard for Safety Relocking Devices for Safes and Vaults (Eleventh Edition Reprint with Revisions Through and Including July 06 2018).pdf

上传人:Iclinic170 文档编号:438869 上传时间:2018-11-14 格式:PDF 页数:12 大小:561.78KB
下载 相关 举报
ANSI UL 140-2006 UL Standard for Safety Relocking Devices for Safes and Vaults (Eleventh Edition Reprint with Revisions Through and Including July 06 2018).pdf_第1页
第1页 / 共12页
ANSI UL 140-2006 UL Standard for Safety Relocking Devices for Safes and Vaults (Eleventh Edition Reprint with Revisions Through and Including July 06 2018).pdf_第2页
第2页 / 共12页
ANSI UL 140-2006 UL Standard for Safety Relocking Devices for Safes and Vaults (Eleventh Edition Reprint with Revisions Through and Including July 06 2018).pdf_第3页
第3页 / 共12页
ANSI UL 140-2006 UL Standard for Safety Relocking Devices for Safes and Vaults (Eleventh Edition Reprint with Revisions Through and Including July 06 2018).pdf_第4页
第4页 / 共12页
ANSI UL 140-2006 UL Standard for Safety Relocking Devices for Safes and Vaults (Eleventh Edition Reprint with Revisions Through and Including July 06 2018).pdf_第5页
第5页 / 共12页
亲,该文档总共12页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 140 Relocking Devices for Safes and VaultsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR

2、 FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Relocking Devices for Safes and Vaults, UL 140 Eleventh Edition, Dated October 27, 2006 Summary of Topics This revision to ANSI/UL 140 is being issued to reect the reaffirmation of the ANSI approval of the St

3、andard. No technical changes have been made to the document. The revised requirements are substantially in accordance with Proposal(s) on this subject dated May 18, 2012. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the ma

4、rgin. Changes in requirements are marked with a vertical line in the margin and are followed by an effective date note indicating the date of publication or the date on which the changed requirement becomes effective. All rights reserved. No part of this publication may be reproduced, stored in a re

5、trieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of mer

6、chantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an au

7、thorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, an

8、d hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard a

9、re now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the note following the affected item. The prior text for requirements that have been revised and that have a future effective date are located a

10、fter the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. AUGUST 1, 2012 UL 140 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL AUGUST 1, 2012 UL 140 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHE

11、R REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL OCTOBER 27, 2006 (Title Page Reprinted: August 1, 2012) 1 UL 140 Standard for Relocking Devices for Safes and Vaults The First, Second and Third Editions were originally combined with the Standard for Burglary-Resisting Safes, UL 687. The Fou

12、rth Sixth Editions were titled the Standard for Relocking Devices. Fourth Edition January, 1953 Fifth Edition May, 1972 Sixth Edition October, 1972 Seventh Edition March, 1978 Eighth Edition October, 1983 Ninth Edition February, 1993 Tenth Edition November, 1997 Eleventh Edition October 27, 2006 Thi

13、s ANSI/UL Standard for Safety consists of the Eleventh Edition including revisions through August 1, 2012. The most recent designation of ANSI/UL 140 as a Reaffirmed American National Standard (ANS) occurred on August 1, 2012. ANSI approval for a standard does not include the Cover Page, Transmittal

14、 Pages, Title Page, or effective date information. Any other portions of this ANSI/UL standard that were not processed in accordance with ANSI/UL requirements are noted at the beginning of the impacted sections. Comments or proposals for revisions on any part of the Standard may be submitted to UL a

15、t any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all

16、copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2012 UNDERWRITERS LABORATORIES INC. ANSI/UL 140-2008 (R2012)UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL AUGUST 1,

17、2012 RELOCKING DEVICES FOR SAFES AND VAULTS - UL 140 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .4 2 General 4 2.1 Components .4 2.2 Units of measurement .5 2.3 Undated references .5 3

18、 Glossary .5 CONSTRUCTION 4 General 5 5 Protection Against Corrosion .6 PERFORMANCE 6 General 6 7 Test Equipment .6 8 Attack Tests For Chests, Safes, And Light Vault Doors 7 8.1 Punch test .7 8.2 Manipulation test .7 8.3 Cutting test 7 8.4 Force test .7 9 Attack Tests For Heavy Vault Doors .7 9.1 Op

19、eration test 7 9.2 Manipulation test .8 MARKING 10 General .8 OCTOBER 27, 2006 RELOCKING DEVICES FOR SAFES AND VAULTS - UL 140 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements cover relocking devic

20、es for the following: a) Light vault doors, b) Heavy vault doors, and c) Safes or chests. 1.2 Relocking devices are intended to relock the bolt mechanism or door of a vault, safe, or chest in the event that the combination lock is subjected to attack. 1.3 A product that contains features, characteri

21、stics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involve a risk of re, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements as determined necessary to

22、 maintain the acceptable level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conict with specic requirements or provisions of this standard cannot be judged to comply with this standard. Where consider

23、ed appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard. 2 General 2.1 Components 2.1.1 Except as indicated in 2.1.2, a component of a product covered by this standard shall comply

24、with the requirements for that component. 2.1.2 A component is not required to comply with a specic requirement that: a) Involves a feature or characteristic not required in the application of the component in the product covered by this standard or b) Is superseded by a requirement in this standard

25、. 2.1.3 A component shall be used in accordance with its recognized rating established for the intended conditions of use. 2.1.4 Specic components are recognized as being incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under li

26、mited conditions, such as certain temperatures not exceeding specied limits, and shall be used only under those specic conditions for which they have been recognized. OCTOBER 27, 2006 RELOCKING DEVICES FOR SAFES AND VAULTS - UL 140 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR

27、DISTRIBUTION WITHOUT PERMISSION FROM UL 2.2 Units of measurement 2.2.1 If a value for measurement is followed by a value in other units in parentheses, the rst stated value is the requirement. 2.3 Undated references 2.3.1 Any undated reference to a code or standard appearing in the requirements of t

28、his standard shall be interpreted as referring to the latest edition of that code or standard. 3 Glossary 3.1 For the purposes of this standard, the following denitions apply. 3.2 COMMON HAND TOOLS Common hand tools include: chisels, punches, wrenches, screwdrivers, pliers, hammers, and sledges not

29、exceeding the 8-pound (3.82-kg) size, and pry bars and ripping tools not exceeding 5 feet (1.52 m) in length. 3.3 CUTTING TORCH A heavy duty commercially available oxy-fuel cutting torch. 3.4 HEAVY VAULT DOOR A vault door having a minimum net thickness of 1-1/2 inches (38.1 mm) of steel or attack-re

30、sistant material, or both, in front of the lock and bolt mechanism. 3.5 LIGHT VAULT DOOR A vault door having a net thickness of less than 1-1/2 inches (38.1 mm) of steel or attack-resistant material, or both, in front of the lock and bolt mechanism. 3.6 PICKING TOOLS Picking tools include common or

31、standard patterns, but not tools that are designed for use against a particular make of relocking device. 3.7 PORTABLE ELECTRIC TOOLS Electric hand drills not exceeding 1/2-inch (12.7-mm) drill capacity. CONSTRUCTION 4 General 4.1 A relocking device intended for use on a safe equipped with more than

32、 one combination lock shall protect each lock that is capable of being operated singly to release the main locking mechanism. 4.2 An auxiliary bolt-type relocking member as used in a chest, safe, or light vault door, shall be equal in strength to the bolt(s) used to hold the door in the locked posit

33、ion. When the bolts used to hold the door in the locked position are more than 5/8-inch (16-mm) in diameter, the relocking members shall be at least equal in strength to two cold-rolled steel bolts of 5/8-inch diameter. 4.3 A relocking device shall not be used on a heavy vault door unless the door i

34、s of an offset-spindle construction. Exception: A relocking device may be used on a heavy vault door of a double-combination lock construction when the punching of either lock joins the lever connections in the locked position so as to secure against subsequent attacks. OCTOBER 27, 2006 RELOCKING DE

35、VICES FOR SAFES AND VAULTS - UL 140 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 5 Protection Against Corrosion 5.1 Iron and steel parts shall be protected against corrosion by enameling, galvanizing, sherardizing, plating, or other equi

36、valent means. Exception No. 1: This requirement does not apply to minor parts, such as washers, screws, bolts, and similar hardware if the corrosion of such unprotected parts does not adversely affect the operation of the product. Exception No. 2: Parts made of stainless steel, polished or treated,

37、when required, do not require additional protection against corrosion. Exception No. 3: This requirement does not apply to bearings and similar parts where such protection is impractical. 5.2 The requirement of 5.1 applies to all enclosures of sheet steel or cast iron and to all springs and other pa

38、rts upon which intended mechanical operation depends. 5.3 Bearing surfaces shall be of such materials and design as to resist binding due to corrosion. PERFORMANCE 6 General 6.1 A single sample of the relocking device is to be attached, as intended by the manufacturer, on a safe, chest, or vault doo

39、r and submitted for tests. A sectional sample of the door may be tested when it is fully representative of the full door. 6.2 For heavy vault door application, a section of the door containing an offset combination lock spindle connection or the equivalent may be tested. 7 Test Equipment 7.1 The tes

40、t equipment may include any common hand tools, picking tools, or portable electric tools. 7.2 The test equipment used on a light or heavy vault door may include any of the tools specied in 7.1 and may also include an oxy-fuel gas cutting or welding torch. 7.3 The quantity of gas consumed in any one

41、test is not to exceed 1000 cubic feet (28.3 m 3 ), combined total oxygen and fuel gas. OCTOBER 27, 2006 RELOCKING DEVICES FOR SAFES AND VAULTS - UL 140 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 8 Attack Tests For Chests, Safes, And Li

42、ght Vault Doors 8.1 Punch test 8.1.1 The relocking device of a light vault door, chest, or safe is to operate and shall relock after the combination lock spindle is punched or driven through the back of the lock case by means of common hand tools. 8.1.2 A bolt-throwing spindle or gear connections of

43、 a light vault door, chest or safe, is to be sheared by forcing the handle to the open position. During the test, the relocking device, independent of the usual or main lock connection, is to be in the released or locked condition. 8.2 Manipulation test 8.2.1 The relocking device of a light vault do

44、or, chest, or safe, is to resist attempts to release or unlock the relocking mechanism by manipulation of common hand or picking tools through openings made during the tests described in 8.1.1 and 8.1.2. 8.2.2 During the test specied in 8.2.1, pressure may be applied to the bolt throw handle of the

45、light vault door, chest, or safe, in the direction that tends to defeat the relocking device. 8.3 Cutting test 8.3.1 The relocking device of a light vault door is to operate and relock the vault door when the master connection between the combination lock and the locking bolts has been severed by th

46、e use of a cutting torch. 8.4 Force test 8.4.1 The relocking device of a light vault door is to operate and relock after an attempt is made, by any mechanical means, to force the master connection out of engagement with the combination lock. 9 Attack Tests For Heavy Vault Doors 9.1 Operation test 9.

47、1.1 The relocking device of a heavy vault door is to operate and securely relock the bolt work of the door, before an opening is created to permit release of the original lock mechanism. The openings may be made at any point on the door by means of the tools specied in Test Equipment, Section 7. OCT

48、OBER 27, 2006 RELOCKING DEVICES FOR SAFES AND VAULTS - UL 140 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 9.2 Manipulation test 9.2.1 The relocking device of a heavy vault door is to resist attempts to release or unlock the relocking me

49、chanism by manipulation with hand or picking tools through openings made during the test described in 9.1.1. MARKING 10 General 10.1 Each relocking device shall be plainly marked with the manufacturers or private labelers name or identifying symbol. 10.2 When a manufacturer produces a relocking device at more than one factory, each device shall have a distinctive marking to identify it as the product of a particular factory. 10.3 Each relocking device shall be marked with the date of manufactu

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1