1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 1565 Positioning Devices STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED F
2、OR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Positioning Devices, UL 1565 Fifth Edition, Dated January 25, 2013 SUMMARY OF TOPICS This revision of ANSI/UL 1565 is being issued to reaffirm approval as an American National Standard. No changes in requir
3、ements are involved. As noted in the Commitment for Amendments statement located on the back side of the title page, UL and CSA are committed to updating this harmonized standard jointly. However, the revision pages dated May 5, 2017 will not be jointly issued by UL and CSA as these revision pages o
4、nly address UL ANSI approval dates. The new requirements are substantially in accordance with Proposal(s) on this subject dated February 24, 2017. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, me
5、chanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable fo
6、r any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such
7、damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damag
8、e, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. MAY 5, 2017 UL 1565 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WIT
9、HOUT PERMISSION FROM UL MAY 5, 2017 UL 1565 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CSA Group CSA C22.2 No. 18.5-13 Second Edition Underwriters Laboratories Inc. UL 1565 Fifth Edition Positioning Devices Janua
10、ry 25, 2013 (Title Page Reprinted: May 5, 2017) ANSI/UL 1565-2017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Canadian Standards Association (operating as CSA Group) and Und
11、erwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to CSA Group or UL at any time. Revisions to this standard will be made only after processing according to the standards development procedures of CSA Group and UL. CSA Group and UL wil
12、l issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ISBN 978-1-77139-015-6 2013 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This
13、 Standard is subject to periodic review, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number
14、); relevant clause, table, and/or gure number; wording of the proposed change; and rationale for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2017 Underwriters Laboratori
15、es Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standar
16、d for Safety consists of the Fifth Edition. The most recent designation of ANSI/UL 1565 as an American National Standard (ANSI) occurred on May 5, 2017. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. Comments or proposals
17、 for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. To purchase UL Standards, visit ULs Standards Sales Site at http:/ HowToOrder.aspx or call
18、toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .5 1 Scope .7 2 Dated and undated references .7 3 Normative references .7 4 Denitions .8 5 Classication .9 6 General requirements 10 7 Marking 11 7.1 G
19、eneral .11 7.2 Specic markings based on classication.11 8 General notes on tests.12 9 Mechanical strength requirements .13 10 Polymeric materials .14 10.1 Flammability classication 14 10.2 Relative thermal index rating14 10.3 Substitution of materials15 10.4 Material requirements 15 11 Corrosion res
20、istance 15 12 Sharp edges 16 13 Installation test 16 14 Mechanical strength test method 16 14.1 General.16 14.2 Assembly for test Positioning Devices17 14.3 Assembly for test Separate Mounting Devices 18 15 Mechanical strength/elevated temperature test Wiring Ducts19 16 Environmental conditioning .1
21、9 17 Smoke and heat release tests 20 TABLES 21 FIGURES .22 ANNEX A ADHESIVES (Normative) A1 Scope .27 A2 Requirements 27 A3 Method General.27 A4 As-received test 27 A5 Effect of temperature 28 A6 Effect of humidity .30 A7 Effect of cold .30 A8 Effect of cyclic conditions 30 A9 Other test considerati
22、ons 30 JANUARY 25, 2013 CSA C22.2 NO. 18.5-13 UL 1565 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL ANNEXBW ATER AND ULTRAVIOLET LIGHT EXPOSURE (Normative) B1 Retention of mechanical strength following water and ultraviolet light exposure
23、 32 B2 Normative references32 B3 Ultraviolet light exposure .32 B3.1 Apparatus 32 B3.2 Method 33 ANNEX C SMOKE AND HEAT RELEASE TEST (Normative) C1 Scope.34 C2 Apparatus34 C2.1 General 34 C2.2 Ignition source .34 C2.3 Test frame enclosure and burner .36 C2.4 Collection hood and exhaust duct.38 C2.5
24、Velocity measuring instruments.40 C2.6 Gas sampling and analysis equipment 42 C2.7 Smoke measuring instruments .42 C2.8 Data acquisition 42 C3 Pretest calibration 42 C3.1 Oxygen analyzer 42 C3.2 Heat release rate .43 C3.3 Photometer system .44 C4 Test procedure.44 C4.1 Initial preparation44 C4.2 Pro
25、cedure .44 C5 Calculations .44 C5.1 Calibration constant .44 C5.2 Heat release rate .45 C5.3 Smoke release rate .47 C5.4 Normalized optical density .47 C6 Report 48 ANNEX D SUBSTITUTION OF MATERIALS (Informative) D1 Normative references .49 D2 Criteria for substitution of materials .49 ANNEX E POLYM
26、ERIC MATERIAL MODIFICATIONS (Informative) E1 Regrind material50 E2 Additives used in the molding process .50 E3 Blending materials 51 JANUARY 25, 2013 CSA C22.2 NO. 18.5-13 UL 1565 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface Thi
27、s is the harmonized CSA Group and UL Standard for Positioning Devices. It is the second edition of CSA C22.2 No. 18.5, and the fth edition of UL 1565. This edition of CSA-C22.2 No. 18.5 supersedes the previous edition published in 2002. This edition of UL 1565 supersedes the previous edition publish
28、ed in 2002. This harmonized Standard was prepared by Underwriters Laboratories and CSA Group. The efforts and support of the members of the Technical Harmonization Committee, which includes end product manufacturers and material suppliers, are gratefully acknowledged. This Standard is considered sui
29、table for use for conformity assessment within the stated scope of the Standard. This Standard was reviewed by the Technical Subcommittee on ICCM03-Fittings, Hardware and Positioning Devices, under the jurisdiction of the Technical Committee on Wiring Products, and has been formally approved by the
30、Technical Committee. This standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. Where reference is made to a specic number of samples to be tested, the specied number is considered a minimum quantity. Note: Although the intended primary appl
31、ication of this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. Level of harmonization This Standard is published as an equivalent standard for CSA and UL. An equivalent st
32、andard is a standard that is substantially the same in technical content except as follows. Technical deviations are allowed for Codes and Governmental Regulations, and those recognized as being in accordance with NAFTA Article 905, for example because of fundamental, climatic, geographical, technol
33、ogical or infrastructural factors, scientic justication or the level of protection that the country considers appropriate. Presentation is word for word except for editorial changes. Interpretations The interpretation by the SDO (Standards Development Organization) of an equivalent standard shall be
34、 based on the literal text to determine compliance with the standard in accordance with the procedural rules of the SDO. If more than one interpretation of the literal text has been identied, a revision shall be proposed as soon as possible to each of the SDOs to more accurately reect the intent. CS
35、A Group effective date The effective date for CSA Group will be announced through CSA Informs or a CSA Group certication notice. UL effective date As of June 1, 2014, all products Listed or Recognized by UL must comply with the requirements in this standard. JANUARY 25, 2013 CSA C22.2 NO. 18.5-13 UL
36、 1565 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Between January 25, 2013 and June 1, 2014, new product submittals to UL may be evaluated under all requirements in this standard or, if requested in writing, evaluated under presently ef
37、fective requirements only. The presently effective requirements are contained in the fourth edition of UL 1565. A UL effective date is one established by Underwriters Laboratories Inc. and is not part of the ANSI approved standard. JANUARY 25, 2013 CSA C22.2 NO. 18.5-13 UL 1565 6UL COPYRIGHTED MATER
38、IAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 1 Scope 1.1 This standard applies to those metallic and nonmetallic devices used for positioning which may include bundling and securing or to a limited extent supporting cable, wire, conduit, or tubing of a wirin
39、g system in electrical installations, to reduce the risk of re, electric shock, or injury to persons. This standard applies to, but is not limited to, cable clamps, cable and conduit clips, and non-raceway wiring ducts. 1.2 These requirements do not apply to cable ties or cable tie accessories, coat
40、ed electrical sleeving, extruded insulating tubing, metallic or nonmetallic raceways or woven exible nonmetallic tubing (ber loom) employed as mechanical protection for insulated wires or equipment covered by other standards or requirements. Note 1: Cable ties and cable tie accessories are covered i
41、n the Standard for Cable Ties for Electrical Installations, CAN/CSA-C22.2 No. 62275 or UL 62275. Note 2: Nonmetallic Mechanical Protective Tubing (NMPT) is covered in the Standard for Nonmetallic Mechanical Protective Tubing (NMPT), CSA C22.2 No. 227.3 or UL 1696. 1.3 These requirements do not apply
42、 to any mechanical protection or electrical insulation that is provided by these devices. 1.4 These requirements do not apply to hardware for the support of conduit, tubing, and cable from a building structure, such as hangers, staples, straps, and similar devices for installation in accordance with
43、 the National Electrical Code, NFPA 70, and the Canadian Electrical Code (CE Code) Part I. Note: Hardware for the support of conduit, tubing, and cable from a building structure such as hangers, staples, straps, and similar devices for installation in accordance with the National Electrical Code, NF
44、PA 70, and the Canadian Electrical Code (CE Code) Part I are covered in the Standard for Hardware for the Support of Conduit, Tubing, and Cable, CSA C22.2 No. 18.4 or UL 2239. 1.5 In Canada, the requirements in this standard generally address class of workmanship in accordance with the Canadian Elec
45、trical Code (CE Code) Part 1, and where applicable, minor combustible components in the National Building Code of Canada. 2 Dated and undated references 2.1 For undated references to Standards, such references shall be considered to refer to the latest edition and all amendments to that edition up t
46、o the time when this Standard was approved. For dated references to Standards, such references shall be considered to refer to the dated edition and all amendments published up to the time the Standard was approved. 3 Normative references CSA Group Standards C22.1-12 Canadian Electrical Code, Part I
47、 CAN/CSA-C22.2 No. 0-10 General Requirements Canadian Electrical Code, Part II JANUARY 25, 2013 CSA C22.2 NO. 18.5-13 UL 1565 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CAN/CSA-C22.2 No. 0.17-00 Evaluation of Properties of Polymeric Ma
48、terials C22.2 No. 18.4-04 Hardware for the Support of Conduit, Tubing, and Cable UL Standards UL 746B Polymeric Materials Long Term Property Evaluations UL 2239 Hardware for the Support of Conduit, Tubing, and Cable ASTM Standards ASTM B117-97 Standard Practice for Operating Salt-Spray (Fog) Apparat
49、us IEC Standards IEC 60216-4-1 (2006) Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 4: Aging Ovens Section One: Single Chamber Ovens (Third Edition) IEC 60695-11-10 (2003) Fire Hazard Testing Part 11-10: Test Flames 50 W Horizontal and Vertical Flame Test Methods. (First Edition) National Research Council of Canada Publication National Building Code of Canada 2011 NFPA Publication National Electric
