1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 489C Flatiron and Appliance Plugs STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUT
2、HORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Flatiron and Appliance Plugs, UL 489C First Edition, Dated April 28, 2017 Summary of Topics This document is the First Edition of the Standard for Appliance and Flatiron Plugs, ANSI/UL 498C The new
3、 requirements are substantially in accordance with Proposal(s) on this subject dated November 4, 2016. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwi
4、se without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, in
5、direct or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for
6、any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable
7、attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. APRIL 28, 2017 UL 489C tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL APRIL 28, 2017 UL
8、 489C tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CSA Group CSA C22.2 No. 57 First Edition Underwriters Laboratories Inc. UL 498C First Edition Flatiron and Appliance Plugs April 28, 2017 ANSI/UL 498C-2017UL COPYR
9、IGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”), and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions
10、on any part of the standard may be submitted to the CSA Group or UL at anytime. Revisions to this standard will be made only after processing according to the standards development procedures of the CSA Group, and UL. CSA Group and UL will issue revisions to this standard by means of a new edition o
11、r revised or additional pages bearing their date of issue. ISBN 978-1-4883-0755-3 2017 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to review ve years from the date of publi
12、cation, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include “Proposal for change” in the subject line: Standard designation (number); relevant clause, table, and/
13、or gure number; wording of the proposed change; and rationale for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2017 Underwriters Laboratories Inc. ULs Standards for Safet
14、y are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the Fi
15、rst Edition. The most recent designation of ANSI/UL 498C as an American National Standard (ANSI) occurred on April 28, 2017. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. Comments or proposals for revisions on any part o
16、f the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTH
17、ORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 5 INTRODUCTION 1 Scope .6 2 Reference Publications 6 3 Components8 4 Units of Measurements 8 5 Denitions8 6 References.8 CONSTRUCTION 7 General 9 8 Insulating Materials9 8.1 General .9 8.2 Flammability .9 8.3
18、 Electrical properties10 8.4 Thermal properties 11 9 Enclosure .11 10 Current-Carrying Parts 13 10.1 General .13 10.2 Contacts 13 10.3 Terminals .14 11 Cord Guard (Anti-Kink Device) .14 12 Strain Relief15 13 Replacement Appliance Plug .15 14 Spacings 15 15 Assembly 15 16 Switching Mechanism .15 17 T
19、hermostat.16 PERFORMANCE 18 Tests Representative Devices 16 19 Comparative Tracking Index Test .17 20 Glow Wire Test .17 21 High-Current Arc Resistance to Ignition Test .17 22 Dielectric Voltage-Withstand Test .18 23 Mold Stress Relief Test18 24 Millivolt Drop Test.19 25 Overload Test 20 26 Heating
20、Test .20 27 Millivolt Drop Repeated Test .21 28 Crushing Test 21 29 Mechanical Endurance Test21 30 Accelerated Aging Test 23 31 Cord Guard Test23 MARKINGS APRIL 28, 2017 CSA C22.2 NO. 57 UL 498C 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM
21、UL 32 General24 APRIL 28, 2017 CSA C22.2 NO. 57 UL 498C 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PREFACE This is the harmonized CSA Group and UL standard for Appliance and Flatiron Plugs. It is the First edition of CAN/CSA-C22.2 No.
22、57, and the First edition of UL 498C. This harmonized standard was prepared by the CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the Technical Harmonization Subcommittee for Switch and Outlet Boxes, THSC 23B-1, on the Harmonization of Electrotechnical Standards of the
23、 Nations of the Americas (CANENA), are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This standard was reviewed by the CSA Integrated Committee on Wiring Devices, under the jurisdiction of the CSA Technical Co
24、mmittee on Wiring Devices and the CSA Strategic Steering Committee on requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. Application o
25、f Standard Where reference is made to a specic number of samples to be tested, the specied number is to be considered a minimum quantity. Note: Although the intended primary application of this standard is stated in its scope, it is important to note that it remains the responsibility of the users o
26、f the standard to judge its suitability for their particular purpose. Level of Harmonization This standard uses the IEC format but is not based on, nor is it considered equivalent to, an IEC standard. This standard is published as an equivalent standard for CSA Group and UL. An equivalent standard i
27、s a standard that is substantially the same in technical content, except as follows: Technical national differences are allowed for codes and governmental regulations as well as those recognized as being in accordance with NAFTA Article 905, for example, because of fundamental climatic, geographical
28、, technological, or infrastructural factors, scientic justication, or the level of protection that the country considers appropriate. Presentation is word for word except for editorial changes. Interpretations The interpretation by the standards development organization of an identical or equivalent
29、 standard is based on the literal text to determine compliance with the standard in accordance with the procedural rules of the standards development organization. If more than one interpretation of the literal text has been identied, a revision is to be proposed as soon as possible to each of the s
30、tandards development organizations to more accurately reect the intent. APRIL 28, 2017 CSA C22.2 NO. 57 UL 498C 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Flatiron and Appliance Plugs INTRODUCTION 1 Scope 1.1 These requirements cover a
31、tiron and appliance plugs intended for use on cord-connected portable cooking or heating appliances rated up to 20 A, 250 Volts or less, intended for use in ordinary non-hazardous locations all intended for connection to a branch circuit for use in accordance with the National Electrical Code, NFPA
32、70 and the Canadian Electrical Code, Part I, CSA C22.1-15. 1.2 This Standard does not directly apply to the following devices, but may be used to supplement the requirements within these standards when a device is evaluated to these standards: a) Devices produced integrally with exible cord or cable
33、s that are covered by the Standard for Cord Sets and Power-Supply Cords, UL 817; b) Devices intended for connection to the branch circuit, such as attachment plugs, cord connectors, receptacles, inlets, and outlets, which are covered by the Standard for Attachment Plugs and Receptacles, UL 498; c) D
34、evices solely intended for direct connection to the branch circuit in accordance with the National Electrical Code, NFPA 70, and that are provided with contacts of the pin and sleeve type, that are covered by the Standard for Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type, UL 16
35、82; d) Devices consisting of wiring terminals and supporting blocks intended for the connection of wiring that are covered by the Standard for Terminal Blocks, UL 1059; e) Devices such as wire connectors and soldering lugs that are covered by the Standard for Wire Connectors, UL 486A-486B; the Stand
36、ard for Splicing Wire Connectors, UL 486C; or the Standard for Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors, UL 486E; f) Devices such as quick-connect terminals that are covered by the Standard for Electrical Quick-Connect Terminals, UL 310; or g) Devices such as applian
37、ce couplers that are covered by the Standard for Appliance Couplers for Household and Similar General Purposes Part 1: General Requirements, UL 60320-1. 2 Reference Publications 2.1 Products covered by this Standard shall comply with the referenced installation codes and standards noted in this clau
38、se as appropriate for the country where the product is to be used. When the product is intended for use in more than one country, the product shall comply with the installation codes and standards for all countries where it is intended to be used. APRIL 28, 2017 CSA C22.2 NO. 57 UL 498C 6UL COPYRIGH
39、TED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 2.2 Where reference is made to any Standards, such reference shall be considered to refer to the latest editions and revisions thereto available at the time of printing, unless otherwise specied. CSA Grou
40、p Standards C22.1-15 Canadian Electrical Code, Part I (CE Code, Part I) CAN/CSA C22.2 No. 0.17 Evaluation of properties of polymeric materials CSA C22.2 No. 21 Cord sets and power supply cords CSA C22.2 No. 24 Temperature-indicating and -regulating equipment CSA C22.2 No. 55 Special use switches UL
41、Standards UL 20 General-Use Snap Switches UL 94 Tests for Flammability of Plastic Materials for Parts in Devices and Appliances UL 746A Polymeric Materials Short Term Property Evaluations UL 746B Polymeric Materials Long Term Property Evaluations UL 746D Polymeric Materials Fabricated Parts UL 817 C
42、ord Sets and Power Supply Cords UL 873 Temperature-Indicating and Regulating Equipment UL 60730-1 Automatic Electrical Controls Part 1: General Requirements NFPA (National Fire Protection Association) NFPA 70 National Electrical Code APRIL 28, 2017 CSA C22.2 NO. 57 UL 498C 7UL COPYRIGHTED MATERIAL N
43、OT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 3 Components 3.1 Except as indicated in Clause 3.2, a component of a product covered by this Standard shall comply with the requirements for that component. See Clause 2 for a list of standards covering components gene
44、rally used in the products covered by this Standard. A component shall comply with the CSA Group or UL standards as appropriate for the country where the product is to be used. 3.2 A component is not required to comply with a specic requirement that: a) Involves a feature or characteristic not requi
45、red in the application of the component in the product covered by this standard, or b) Is superseded by a requirement in this standard. 3.3 A component shall be used in accordance with its rating established for the intended conditions of use. 3.4 Specic components are incomplete in construction fea
46、tures or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specied limits, and shall be used only under those specic conditions. 4 Units of Measurements 4.1 When a value for measurement is followed b
47、y a value in other units in parentheses, the rst stated value is the requirement. 5 Denitions 5.1 For the purposes of this standard, the following denitions apply. 5.2 APPLIANCE PLUG (Appliance Connector) A female contact device having a cord guard and a slot conguration specied for use with heating
48、 or cooking appliances and intended to mate with appliance pins. Used as a component of a heater cord set. See the Standard for Cord Sets and Power Supply Cords, UL 817 and Cord Sets and Power Supply Cords, CSA C22.2 No. 21. 5.3 FLATIRON PLUG (Appliance Connector) A female contact device with a cord
49、 guard and a slot conguration specied for use with electric irons and similar heating appliances and intended to mate with appliance pins. 6 References 6.1 Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard. APRIL 28, 2017 CSA C22.2 NO. 57 UL 498C 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOU
