1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 60335-2-34 Safety of Household and Similar Electrical Appliances, Part 2: Particular Requirements for Motor-CompressorsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DIST
2、RIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Safety of Household and Similar Electrical Appliances, Part 2: Particular Requirements for Motor-Compressors, UL 60335-2-34 Fifth E
3、dition, Dated March 22, 2013 Summary of Topics The following is the Fifth Edition of UL 60335-2-34, the common ANCE, CSA Group, and UL (trinational) standard that is an adoption of IEC 60335-2-34, Safety Standard for of Household and Similar Electrical Appliances, Part 2: Particular Requirements for
4、 Motor-Compressors (IEC 60335-2-34, Edition 4.2:2008 Edition 4:2002 consolidated with amendment 1:2004 and amendment 2:2008). Please note that the national difference document incorporates all of the U.S. national differences for UL 60335-2-34. The new requirements are substantially in accordance wi
5、th Proposal(s) on this subject dated September 7, 2012. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides
6、this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of pr
7、ots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this
8、Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or dev
9、iation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the pr
10、eface. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. MARCH 22, 2013 UL 60335-2-34 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WI
11、THOUT PERMISSION FROM UL MARCH 22, 2013 UL 60335-2-34 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Association of Standardization and Certication NMX-J-521/2-34-ANCE First Edition CSA Group CAN/CSA-C22.2 No. 60335-
12、2-34-13 First Edition (IEC 60335-234:2002+A1:2004+A2:2008, MOD) Underwriters Laboratories Inc. UL 60335-2-34 Fifth Edition Safety of Household and Similar Electrical Appliances, Part 2-34: Particular Requirements for Motor-Compressors March 22, 2013 This national standard is based on publication IEC
13、 60335-2-34, Edition 4.2:2008 (Edition 4:2002 consolidated with amendment 1:2004 and amendment 2:2008). ANSI/UL 60335-2-34-2013UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the A
14、ssociation of Standardization and Certication (ANCE), the Canadian Standards Association (operating as “CSA Group”), and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to ANCE, CSA Group, or UL at anytime. Revisions to this stand
15、ard will be made only after processing according to the standards development procedures of ANCE, CSA Group, and UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ANCE will incorporate the same revisions i
16、nto a new edition of the standard bearing the same date of issue as the CSA Group and UL pages. Copyright 2013 ANCE Rights reserved in favor of ANCE. ISBN 978-1-55491-972-7 2013 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior perm
17、ission of the publisher. This Standard is subject to periodic review, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line:
18、 Standard designation (number); relevant clause, table, and/or gure number; wording of the proposed change; and rationale for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright
19、 2013 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive propert
20、y of UL. This ANSI/UL Standard for Safety consists of the Fifth Edition. The most recent designation of ANSI/UL 60335-2-34 as an American National Standard (ANSI) occurred on March 22, 2013. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back),
21、 or the Preface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Coll
22、aborative Standards Development System (CSDS) at http:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .5 NATIONAL DIFFERENCES .8 FOREW
23、ORD 9 INTRODUCTION . 12 1 Scope 14 2 Normative references .15 3 Denitions 16 4 General requirement .18 5 General conditions for the tests 18 6 Classication 20 7 Marking and instructions 21 8 Protection against access to live parts 21 9 Starting of motor-operated appliances 21 10 Power input and curr
24、ent .22 11 Heating 22 12 Void .22 13 Leakage current and electric strength at operating temperature 22 14 Transient overvoltages 22 15 Moisture resistance .22 16 Leakage current and electric strength .22 17 Overload protection of transformers and associated circuits 22 18 Endurance .22 19 Abnormal o
25、peration .23 20 Stability and mechanical hazards .30 21 Mechanical strength .30 22 Construction .30 23 Internal wiring 35 24 Components .36 25 Supply connection and external exible cords 37 26 Terminals for external conductors .37 27 Provision for earthing 37 28 Screws and connections .37 29 Clearan
26、ces, creepage distances and solid insulation 37 30 Resistance to heat and re 38 31 Resistance to rusting 38 32 Radiation, toxicity and similar hazards .39 MARCH 22, 2013 NMX-J-521/2-34-ANCE CAN/CSA-C22.2 NO. 60335-2-34-13 UL 60335-2-34 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION
27、 OR DISTRIBUTION WITHOUT PERMISSION FROM UL Annexes Annex C (normative) Aging test on motors Annex D (normative) Alternative requirements for protected motor units Annex AA (normative) Running overload tests for motor-compressors classied as tested with Annex AA Annex DVA (informative) Component Sta
28、ndards Cross Reference Annex 101.DVBB (normative) Accelerated Aging Tests Gaskets Annex 101.DVCC Refrigeration Code (informative) Annex 101.DVDD (normative) Nonmetallic Materials 101.DVDD.1 General 57 101.DVDD.2 Electrical properties .57 101.DVDD.3 Mechanical properties .57 101.DVDD.4 Thermal proper
29、ties 58 101.DVDD.5 Ultraviolet light exposure .58 Annex 101.DVEE (normative) Bypass valve testing Annex 101.DVFF (informative) Supplemental requirements Annex 101.DVGG (informative) Optional Fatigue Test 101.DVGG.5 Fatigue cycle test specication .61 Annex 101.DVHH (informative) Maximum Continuous Cu
30、rrent Test Bibliography MARCH 22, 2013 NMX-J-521/2-34-ANCE CAN/CSA-C22.2 NO. 60335-2-34-13 UL 60335-2-34 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface This is the harmonized ANCE, CSA Group, and UL standard for particular requirem
31、ents for motor-compressors. It is the rst edition of NMX-J-521/2-34-ANCE, the rst edition of CAN/CSA-C22.2 No. 60335-2-34, and the fth edition of UL 60335-2-34. This edition of UL 60335-234 supersedes the previous edition(s) published in March, 2004. This Standard is based on the Standard for Safety
32、 of Household and Similar Electrical Appliances, Part 2-34: Particular Requirements for Motor-Compressors, IEC Publication 60335-234, edition 4.2. In Canada, for general information on the Standards of the Canadian Electrical Code, Part II, see the preface of CAN/CSA-C22.2 No. 0. This harmonized sta
33、ndard was prepared by the Association of Standardization and Certication (ANCE), CSA Group, and Underwriters Laboratories Inc. (UL). The efforts and support of Industry Associations Cmara Nacional de Manufacturas Elctricas (CANAME), the Heating, Refrigeration and Air Conditioning Institute of Canada
34、 (HRAI), the Air-Conditioning, Heating, and Refrigeration Institute (AHRI), and the Association of Home Appliance Manufacturers (AHAM), and of the Technical Harmonization Sub-Committee (THSC 61D TC1) of the Council on the Harmonization of Electrotechnical Standards of the Nations of the Americas (CA
35、NENA), are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. The present Mexican Standard was developed by the CT 61 from the Comite de Normalizacion de la Asociacion de Normalizacion y Certicacion, A.C., CONANCE
36、with the collaboration of the heating, refrigeration and air conditioning manufacturers and users. This standard was reviewed by the CSA Subcommittee on Household Appliances for Refrigeration, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strat
37、egic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved by the Standards Council of Canada (SCC) as a National Standard of Canada. This Standard has been approved by the American National Standards
38、Institute (ANSI) as an American National Standard. Where reference is made to a specic number of samples to be tested, the specied number is to be considered a minimum quantity. Note: Although the intended primary application of this standard is stated in its scope, it is important to note that it r
39、emains the responsibility of the users of the standard to judge its suitability for their particular purpose. Level of harmonization This standard adopts the IEC text with national differences. This standard is published as an equivalent standard for ANCE, CSA Group, and UL. An equivalent standard i
40、s a standard that is substantially the same in technical content, except as follows: Technical national differences are allowed for codes and governmental regulations as well as those recognized as being in accordance with NAFTA Article 905, for MARCH 22, 2013 NMX-J-521/2-34-ANCE CAN/CSA-C22.2 NO. 6
41、0335-2-34-13 UL 60335-2-34 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL example, because of fundamental climatic, geographical, technological, or infrastructural factors, scientic justication, or the level of protection that the country
42、considers appropriate. Presentation is word for word except for editorial changes. All national differences from the IEC text are included in the ANCE, CSA Group, and UL versions of the standard. While the technical content is the same in each organizations version, the format and presentation may d
43、iffer. It is the intent and objective of the US, Canadian, and Mexican SDOs and associated Industries to avoid the use of single country deviations to the greatest extent possible and practical. Single country deviations should only be used as a last resort when all other options have been explored.
44、 Further this includes a commitment to review and reconsider any and all single country revisions at each revision cycle with the intent of nding solutions to remove the single county deviation in the spirit of tri-national harmonization. A list of work item requests will be recorded between revisio
45、n cycles and by default removal of all single country deviations will be on the list for the next revision cycle. Reasons for differences from IEC National Differences from the IEC are being added in order to address regulatory and safety situations present in Canada, Mexico, and the US. Interpretat
46、ions The interpretation by the standards development organization of an identical or equivalent standard is based on the literal text to determine compliance with the standard in accordance with the procedural rules of the standards development organization. If more than one literal interpretation h
47、as been identied, a revision is to be proposed as soon as possible to each of the standards development organizations to more accurately reect the intent. ANCE effective date The effective date for ANCE will be announced through the Diario Ocial de la Federacin (Official Gazette) and is indicated on
48、 the cover page. CSA Group Effective Date The effective date for CSA Group will be announced through CSA Informs or a CSA Group certication notice. UL Effective Date As of March 22, 2013, all products Listed or Recognized by UL must comply with the requirements in this standard. A UL effective date
49、is one established by Underwriters Laboratories Inc. and is not part of the ANSI approved standard. IEC Copyright For ANCE, the text, gures, and tables of International Electrotechnical Commission Publication 60335-2-34, Standard for Safety of Household and Similar Electrical Appliances, Part 2-34: Particular Requirements for Motor-Compressors, edition 4.2, copyright 2008, are used in this standard according to the guidelines provided in the ISO
