1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 60730-2-9 Standard for Automatic Electrical Controls Part 2-9: Particular Requirements for Temperature Sensing Controls STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER
2、REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Standard for Automatic Electrical Controls Part 2-9: Particular Requirements for Temperature Sensing Controls,
3、UL 60730-2-9 Fourth Edition, Dated February 14, 2017 Summary of Topics This new edition of ANSI/UL 60730-2-9 adopts the fourth edition of IEC 60730-2-9 with national differences. The new requirements are substantially in accordance with Proposal(s) on this subject dated December 2, 2016. All rights
4、reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed
5、or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out o
6、f the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electro
7、nic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard
8、 on the purchasers computer system. FEBRUARY 14, 2017 UL 60730-2-9 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 14, 2017 UL 60730-2-9 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR D
9、ISTRIBUTION WITHOUT PERMISSION FROM UL February 14, 2017 1 UL 60730-2-9 Standard for Automatic Electrical Controls Part 2-9: Particular Requirements for Temperature Sensing Controls Prior to the rst edition of UL 60730-2-9, the requirements for the products covered by this Standard were included in
10、UL 8730-2-9. First Edition January, 2003 Third Edition October, 2010 Fourth Edition February 14, 2017 This ANSI/UL Standard for Safety consists of the Fourth Edition. The most recent designation of ANSI/UL 60730-2-9 as an American National Standard (ANSI) occurred on February 14, 2017. ANSI approval
11、 for a standard does not include the Cover Page, Transmittal Pages, Title Page, or Preface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any tim
12、e. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrigh
13、ts, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2017 UNDERWRITERS LABORATORIES INC. ANSI/UL 60730-2-9-2017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 14, 2017 UL
14、 60730-2-9 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface (UL) 8 NATIONAL DIFFERENCES . 9 FOREWORD . 10 1 Scope and normative references .13 1.1 Scope 13 1.2 Normative references 14 2 Terms and denitio
15、ns 15 2.2 Denitions of types of control according to purpose 15 2.3 Denitions relating to the function of controls .18 2.5 Denitions of types of control according to construction 18 3 General requirements 18 4 General notes on tests .18 4.1 Conditions of test 18 4.2 Samples required 19 5 Rating 19 6
16、 Classication 19 6.4 According to features of automatic action .19 6.7 According to ambient temperature limits of the switch head .20 6.15 According to construction .20 7 Information 20 7.2 Methods of providing information 20 8 Protection against electric shock .23 9 Provision for protective earthin
17、g .23 10 Terminals and terminations 23 11 Constructional requirements 23 11.1 Materials 23 11.3 Actuation and operation .23 11.4 Actions 24 11.6 Mounting of controls 27 11.101 Time factor 27 12 Moisture and dust resistance .27 12.101 Refrigeration controls .27 13 Electric strength and insulation res
18、istance .28 14 Heating 29 15 Manufacturing deviation and drift .32 15.5.6CDV.1 Fan/heat sequencer Initial time-calibration test I 33 15.5.6DDV.1 Fan/heat sequencer Initial time-calibration test II 34 15.5.6EDV.1 The following is applicable to controls classied under 6.7.103BDV. 34 16 Environmental s
19、tress 36 17 Endurance .36 17.15 Single operation devices .36 17.16 Test for particular purpose controls 38 17.101 Type 2.P cycling test .43 18 Mechanical strength .45 18.101 Push-and-turn or pull-and-turn actuation 45 18.102 Parts containing liquid metal .46 19 Threaded parts and connections 47 FEBR
20、UARY 14, 2017 UL 60730-2-9 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 20 Creepage distances, clearances and distances through solid insulation .47 21 Resistance to heat, re and tracking 47 22 Resistance to corrosion 47 23 Electromagnet
21、ic compatibility (EMC) requirements Emission .47 23.101.1 Test conditions .47 23.101.2 Test procedure .48 24 Components .48 25 Normal operation .48 26 Electromagnetic compatibility (EMC) requirements Immunity .48 27 Abnormal operation .48 27.101DV.1 Overvoltage .48 27.102DV.1 Thermal Cycling .48 27.
22、103DV.1 Short Circuit 49 28 Guidance on the use of electronic disconnection .51 Annexes Annex G (normative) Heat and re resistance tests G.5.1 Ball pressure test 1 53 G.5.2 Ball pressure test 2 53 Annex H (normative) Requirements for electronic controls H.2 Terms and denitions 54 H.6 Classication 54
23、 H.6.18 According to classes of control functions 54 H.7 Information 54 H.11 Constructional requirements 55 H.11.12 Controls using software 55 H.23 Electromagnetic compatibility (EMC) requirements Emission .55 H.26 Electromagnetic compatibility (EMC) requirements Immunity .55 H.26.5 Voltage dips, vo
24、ltage interruptions and voltage variations in the power supply network .56 H.26.8 Surge immunity test 57 H.26.9 Electrical fast transient/burst immunity test 57 H.26.10 Ring wave immunity test .57 H.26.12 Radio-frequency electromagnetic eld immunity .58 H.26.13 Test of inuence of supply frequency va
25、riations .58 H.26.14 Power frequency magnetic eld immunity test 58 H.26.15 Evaluation of compliance .59 H.27 Abnormal operation .59 Annex J (normative) Requirements for thermistor elements and controls using thermistors J.4 General notes on tests 63 J.7 Information 63 FEBRUARY 14, 2017 UL 60730-2-9
26、4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Annex AA (informative) Maximum manufacturing deviation and drift a, b Annex BB (informative) Time factor BB.0 General .66 BB.2 Two-bath method .66 BB.3 Gradient method 66 Annex CC (informative
27、) Number of cycles CC.1 Number of cycles for independently mounted and in-line cord controls 70 CC.2 Minimum number of cycles for independently mounted and in-line cord controls (Canada and the USA) 70 Annex DD (normative) Controls for use in agricultural connement buildings DD.1 Object .71 DD.2 Ter
28、ms and denitions .71 DD.3 Test apparatus .71 DD.4 Severities 71 DD.5 Pre-conditioning 71 DD.6 Initial measurements 71 DD.7 Testing 71 DD.7.1 General .71 DD.7.2 Moist carbon dioxide sulfur dioxide air mixture .72 DD.7.3 Moist hydrogen sulde air mixture 72 DD.7.4 Moist ammonia air mixture 72 DD.7.5 Ur
29、ea water vapour .73 DD.7.6 Warm humid air 73 DD.7.7 Disinfectant germicide water mixture exposure .73 DD.7.8 Dust exposure .73 DD.8 Recovery 73 DD.9 Evaluation .73 DD.9.1 General .73 Annex EE (informative) Guide to the application of temperature sensing controls within the scope of IEC 60730-2-9 EE.
30、1 General .75 EE.1.2 Overview 75 EE.2 Selection of temperature sensing controls within the scope of IEC 60730-2-9 75 EE.3 Classications common to temperature sensing controls 76 EE.3.1 Nature of supply .76 EE.3.2 Type of load .76 EE.3.3 Types of temperature sensing controls according to their purpos
31、e 77 EE.3.4 Features of automatic action 78 EE.3.5 Control pollution situation .80 EE.3.6 Method of connection .80 EE.3.7 Ambient temperature limits of the switch head .81 FEBRUARY 14, 2017 UL 60730-2-9 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSI
32、ON FROM UL EE.3.8 Protection against electric shock 81 EE.3.9 Circuit disconnection or interruption 81 EE.3.10 Number of cycles of actuation (M) of each manual action 83 EE.3.11 Number of automatic cycles (A) of each automatic action 83 EE.3.12 Temperature limits of the mounting surface of the contr
33、ol 84 EE.3.13 Value of proof tracking index (PTI) for the insulation material used 84 EE.3.14 Period of electrical stress across insulating parts supporting live parts and between live parts and earthed metal 85 EE.3.15 Construction 85 EE.3.16 Ageing requirements of the equipment in which the contro
34、l is intended to be used .86 EE.4 Specic types of temperature sensing control 86 EE.4.1 Thermostats .86 EE.4.2 Temperature limiter .88 EE.4.3 Thermal cut-out 90 EE.4.4 Single operation device .92 Bibliography FEBRUARY 14, 2017 UL 60730-2-9 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUC
35、TION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 14, 2017 UL 60730-2-9 7 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface (UL) This UL Standard is based on IEC Publication IEC 60730-2-9: Fourth edition Auto
36、matic Electrical Controls Part 2-9: Particular Requirements for Temperature Sensing Controls. IEC publication 60730-2-9 is copyrighted by the IEC. This UL Standard 60730-2-9, Standard for Automatic Electrical Controls Part 2-9: Particular Requirements for Temperature Sensing Controls, is to be used
37、in conjunction with the fth edition of UL 60730-1. The requirements for temperature sensing controls are contained in this Part 2 Standard and UL 60730-1. Requirements of this Part 2 Standard, where stated, amend the requirements of UL 60730-1. Where a particular subclause of UL 60730-1 is not menti
38、oned in UL 60730-2-9, the UL 60730-1 subclause applies. These materials are subject to copyright claims of IEC and UL. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of UL. All requests pertaining to the UL 60
39、730-2-9 Standard should be submitted to UL. Note Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose. FEBRUARY 14, 2017 UL 6073
40、0-2-9 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES National Differences from the text of International Electrotechnical Commission (IEC) Publication IEC 60730-2-9 are indicated by notations (differences) and are pres
41、ented in bold text. There are ve types of National Differences as noted below. The difference type is noted on the rst line of the National Difference in the standard. The standard may not include all types of these National Differences. DR These are National Differences based on the national regula
42、tory requirements. D1 These are National Differences which are based on basic safety principles and requirements, elimination of which would compromise safety for consumers and users of products. D2 These are national differences from IEC requirements based on existing safety practices. These requir
43、ements reect national safety practices, where empirical substantiation (for the IEC or national requirement) is not available or the text has not been included in the IEC standard. DC These are National Differences based on the component standards and will not be deleted until a particular component
44、 standard is harmonized with the IEC component standard. DE These are National Differences based on editorial comments or corrections. Each national difference contains a description of what the national difference entails. Typically one of the following words is used to explain how the text of the
45、national difference is to be applied to the base IEC text: Addition / Add - An addition entails adding a complete new numbered clause, subclause, table, gure, or annex. Addition is not meant to include adding select words to the base IEC text. Deletion / Delete - A deletion entails complete deletion
46、 of an entire numbered clause, subclause, table, gure, or annex without any replacement text. Modication / Modify - A modication is an altering of the existing base IEC text such as the addition, replacement or deletion of certain words or the replacement of an entire clause, subclause, table, gure,
47、 or annex of the base IEC text. FEBRUARY 14, 2017 UL 60730-2-9 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTERNATIONAL ELECTROTECHNICAL COMMISSION AUTOMATIC ELECTRICAL CONTROLS Part 2-9: Particular requirements for temperature sensing
48、 controls FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardizat
49、ion in the electrical and electronic elds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specications, Technical Reports, Publicly Available Specications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmen
