1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 61215-1 Terrestrial Photovoltaic (PV) Modules Design Qualication and Type Approval Part 1: Test requirements STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTIO
2、N OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Terrestrial Photovoltaic (PV) Modules Design Qualication and Type Approval Part 1: Test requirements, UL 61215-1 First Edi
3、tion, Dated February 28, 2017 Summary of Topics UL 61215-1 is an adoption of IEC 61215-1, Terrestrial Photovoltaic (PV) Modules Design Qualication and Type Approval Part 1: Test requirements (First Edition, issued March 2016). Please note that there are no National Differences. The requirements are
4、substantially in accordance with Proposal(s) on this subject dated November 4, 2016. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior p
5、ermission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar
6、damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever ex
7、ceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) re
8、sulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. FEBRUARY 28, 2017 UL 61215-1 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 28, 2017 UL 61215-1
9、tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL February 28, 2017 1 UL 61215-1 Terrestrial Photovoltaic (PV) Modules Design Qualication and Type Approval Part 1: Test requirements First Edition February 28, 2017 This
10、ANSI/UL Standard for Safety consists of the First Edition dated February 28, 2017. The most recent designation of ANSI/UL 61215-1 as an American National Standard (ANSI) occurred on February 28, 2017. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, or Pre
11、face. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative S
12、tandards Development System (CSDS) at https:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusi
13、ve property of UL. COPYRIGHT 2017 UNDERWRITERS LABORATORIES INC. ANSI/UL 61215-1-2017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 28, 2017 UL 61215-1 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPROD
14、UCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 4 FOREWORD 5 INTRODUCTION . 8 1 Scope and object .9 2 Normative references 9 3 Terms, denitions and abbreviations .10 4 Test samples 11 5 Marking and documentation .12 5.1 Name plate .12 5.2 Documentation 13 6 Testing .14 7 Pass crit
15、eria .15 7.1 General 15 7.2 Power output and electric circuitry .15 7.3 Visual defects .18 7.4 Electrical safety .18 8 Major visual defects 18 9 Report 19 10 Modications .20 11 Test ow and procedures 20 FEBRUARY 28, 2017 UL 61215-1 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR
16、DISTRIBUTION WITHOUT PERMISSION FROM UL PREFACE This UL Standard is based on IEC Publication IEC 61215-1: First edition Terrestrial photovoltaic (PV) modules Design qualication and type approval Part 1: Test requirements. IEC publication IEC 61215-1 is copyrighted by the IEC. These materials are sub
17、ject to copyright claims of IEC and UL. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of UL. All requests pertaining to the Terrestrial photovoltaic (PV) modules Design qualication and type approval Part 1: T
18、est requirements, 61215-1, Standard should be submitted to UL. Note Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose. FEBRUA
19、RY 28, 2017 UL 61215-1 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTERNATIONAL ELECTROTECHNICAL COMMISSION TERRESTRIAL PHOTOVOLTAIC (PV) MODULES DESIGN QUALIFICATION AND TYPE APPROVAL Part 1: Test requirements FOREWORD 1) The Internat
20、ional Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electron
21、ic elds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specications, Technical Reports, Publicly Available Specications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IE
22、C National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and nongovernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardizati
23、on (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representa
24、tion from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cann
25、ot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publication
26、s. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certication bodies provide conformity assessment services and, in some areas, acces
27、s to IEC marks of conformity. IEC is not responsible for any services carried out by independent certication bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individ
28、ual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, th
29、is IEC Publication or any other IEC Publications. 8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of th
30、is IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61215-1 has been prepared by IEC technical committee 82: Solar photovoltaic energy systems. This rst edition of IEC 61215-1 cancels and
31、replaces the second edition of IEC 61215, published in 2005; it constitutes a technical revision. FEBRUARY 28, 2017 UL 61215-1 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL This edition of IEC 61215-1 includes the following signicant tech
32、nical changes with respect to the second edition of IEC 61215:2005 and the second edition of IEC 61646:2008: a) New standard series structure consistent with other IEC standards: Part 1 lists general requirements, Part 1-x specics for each PV technology and Part 2 denes testing. All tests dened in P
33、art 2 are MQTs (module quality tests). b) Sampling procedure rewritten (Clause 4). c) Marking requirements better dened for name plate and general documentation. Copyright International d) Pass/fail criteria have been divided into two “gates”. Gate No. 1 veries the initial maximum power at STC with
34、respect to name plate rating and Gate No. 2 denes the power loss during accelerated aging testing. e) Revised hot-spot endurance test (MQT 09). f) Update of the other tests to be consistent with changes in IEC 61646. g) Removal of the method for measuring temperature coefficients and reference to IE
35、C 60891. h) Denition of NMOT as the nominal module operating temperature measured with the module under maximum power conditions. i) Rewriting of the standard using NMOT instead of NOCT and reference to future IEC 61853-2 for the test procedure. j) Rewriting of the robustness of termination test (MQ
36、T 14) to include evaluation of both cables and junction boxes. k) Stabilization of PV modules implemented. This replaces either light soaking procedure from IEC 61646 or preconditioning from IEC 61215. The text of this standard is based on the following documents: FDIS Report on voting 82/1046/FDIS
37、82/1074/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all parts in the IEC 61215 series, published under the general title Terrestrial photovoltaic (PV) modules Design qualication and type approval, c
38、an be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under http:/webstore.iec.ch in the data re
39、lated to the specic publication. At this date, the publication will be reconrmed, FEBRUARY 28, 2017 UL 61215-1 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL withdrawn, replaced by a revised edition, or amended. FEBRUARY 28, 2017 UL 61215-
40、1 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION Whereas Part 1 of this standard series describes requirements (both in general and specic with respect to device technology), the sub-parts of Part 1 dene technology variations
41、and Part 2 denes a set of test procedures necessary for design qualication and type approval. The test procedures described in Part 2 are valid for all device technologies. FEBRUARY 28, 2017 UL 61215-1 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSIO
42、N FROM UL TERRESTRIAL PHOTOVOLTAIC (PV) MODULES DESIGN QUALIFICATION AND TYPE APPROVAL Part 1: Test requirements 1 Scope and object This part of IEC 61215 lays down IEC requirements for the design qualication and type approval of terrestrial photovoltaic (PV) modules suitable for long-term operation
43、 in general open-air climates, as dened in IEC 60721-2-1. This standard is intended to apply to all terrestrial at plate module materials such as crystalline silicon module types as well as thinlm modules. This standard does not apply to modules used with concentrated sunlight although it may be uti
44、lized for low concentrator modules (1 to 3 suns). For low concentration modules, all tests are performed using the current, voltage and power levels expected at the design concentration. This standard does not address the particularities of PV modules with integrated electronics, it may however be u
45、sed as a basis for testing such PV modules. The objective of this test sequence is to determine the electrical and thermal characteristics of the module and to show, as far as possible within reasonable constraints of cost and time, that the module is capable of withstanding prolonged exposure in cl
46、imates described in the scope. The actual lifetime expectancy of modules so qualied will depend on their design, their environment and the conditions under which they are operated. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and ar
47、e indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050 (all parts), International Electrotechnical Vocabulary (available at http:/www.electropedia.o
48、rg) IEC 60269-6, Low-voltage fuses Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems IEC 60891, Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices Amendment 1 (1992)
49、 IEC 60904-1:1987, Photovoltaic devices Procedures for temperature and irradiance corrections to measured I-V characteristics IEC 60904-1, Photovoltaic devices Part 1: Measurement of photovoltaic current-voltage characteristics IEC 60904-3, Photovoltaic devices Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data FEBRUARY 28, 2017 UL 61215-1 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FO
