1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 62841-2-11 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-11: Particular Requirements For Hand-Held Reciprocating Saws STANDARD FOR
2、SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Hand-Held Motor-Operated Electric Tools Safety Part 2-
3、11: Particular Requirements for Hand-Held Reciprocating Saws, UL 62841-2-11 First Edition, Dated March 27, 2017 Summary of Topics Adoption Of The First Edition Of UL 62841-2-11, Standard for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-11:
4、Particular Requirements For Hand-Held Reciprocating Saws This standard is an adoption of IEC UL 62841-2-11, Edition 1 published November 2015. There are no technical national differences for this standard. The new requirements are substantially in accordance with Proposal(s) on this subject dated De
5、cember 9, 2016. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of
6、any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any
7、other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the
8、claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is sto
9、ring an electronic Standard on the purchasers computer system. MARCH 27, 2017 UL 62841-2-11 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MARCH 27, 2017 UL 62841-2-11 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FU
10、RTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CSA Group CAN/CSA-C22.2 No. 62841-2-11:17 First Edition (IEC 62841-2-11:2015, MOD) Underwriters Laboratories Inc. UL 62841-2-11 First Edition Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safet
11、y Part 2-11: Particular Requirements For Hand-Held Reciprocating Saws March 27, 2017 This national standard is based on publication IEC 62841-2-11, First Edition (2015). ANSI/UL 62841-2-11-2017 Approved byUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISS
12、ION FROM UL Commitment for Amendments This standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”) and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to CSA or UL at any time. Revisions to this
13、 standard will be made only after processing according to the standards development procedures of CSA and UL. CSA and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ISBN 978-1-4883-0877-2 2017 CSA Group All rights reserv
14、ed. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to review within ve years from the date of publication, and suggestions for its improvement will be referred to the appropriate committee. To submit a prop
15、osal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number); relevant clause, table, and/or gure number; wording of the proposed change; and rationale for the change. To purchase CSA Group Standards
16、 and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2017 Underwriters Laboratories Inc. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted vi
17、a a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. This ANSI/UL Standard for Safety consists of the First Edition. The most recent designation of ANSI/UL 62841-2-11 as an American National Standard (ANSI) occurred on March 27, 2017. The ANSI approval fo
18、r this standard does not include the Cover Page, Transmittal Pages, Title Page, Preface Page, National Difference Page or IEC Foreword. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-L
19、ine Collaborative Standards Development System (CSDS) at https:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface . 5 NATIONAL DIFFERENCE
20、S . 7 FOREWORD 8 1 Scope 11 2 Normative references .11 3 Terms and denitions 11 4 General requirements 11 5 General conditions for the tests 12 6 Radiation, toxicity and similar hazards 12 7 Classication 12 8 Marking and instructions 12 9 Protection against access to live parts 12 10 Starting 13 11
21、Input and current .13 12 Heating 13 13 Resistance to heat and re 13 14 Moisture resistance .13 15 Resistance to rusting 13 16 Overload protection of transformers and associated circuits 13 17 Endurance .13 18 Abnormal operation .13 19 Mechanical hazards .14 20 Mechanical strength .15 21 Construction
22、 .15 22 Internal wiring 15 23 Components .16 24 Supply connection and external exible cords 16 25 Terminals for external conductors .16 26 Provision for earthing 16 27 Screws and connections .16 28 Creepage distances, clearances and distances through insulation 16 Annexes Annex I (informative) Measu
23、rement of noise and vibration emissions I.2 Noise test code (grade 2) .21 I.3 Vibration 22 Annex K (normative) Battery tools and battery packs K.1 Scope 31 MARCH 27, 2017 CAN/CSA-C22.2 NO. 62841-2-11:17 UL 62841-2-11 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WI
24、THOUT PERMISSION FROM UL Annex L (normative) Battery tools and battery packs provided with mains connection or non-isolated sources L.1 Scope 32 Bibliography MARCH 27, 2017 CAN/CSA-C22.2 NO. 62841-2-11:17 UL 62841-2-11 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION
25、WITHOUT PERMISSION FROM UL Preface This is the harmonized CSA Group and UL Standard for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-11: Particular Requirements For Hand-Held Reciprocating Saws. It is the First edition of CAN/CSA-C22.2 No.
26、62841-2-11 and the First edition of UL 62841-2-11. This harmonized standard is based on IEC Publication 62841-2-11: First edition Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-11: Particular Requirements For Hand-Held Reciprocating Saws issu
27、ed November 2015. IEC 62841-2-11 is copyrighted by the IEC. This harmonized standard was prepared by CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the International Harmonization Committee (IHC) for the adoption of the IEC series of standards for Hand-Held, Motor-Oper
28、ated, and Transportable Tools and Lawn and Garden Machinery UL are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This standard was reviewed by the CSA Subcommittee on Safety of Hand-Held Motor-Operated Electri
29、c Tools, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved as a National Standard of
30、Canada by the Standards Council of Canada (SCC). This standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. Application of Standard Where reference is made to a specic number of samples to be tested, the specied number is to be considered a
31、minimum quantity. Note: Although the intended primary application of this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. This CAN/CSA-C22.2 No. 62841-2-11, Standard for El
32、ectric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-11: Particular Requirements For Reciprocating Saws is to be used in conjunction with the First edition of CAN/CSA-C22.2 No. 62841-1. The requirements for hand-held reciprocating saws are contained
33、in this Part 2 Standard and CAN/CSA-C22.2 No. 62841-1. Requirements of this Part 2 Standard, where stated, amend the requirements of CAN/CSA-C22.2 No. 62841-1. Where a particular subclause of CAN/CSA-C22.2 No. 62841-1 is not mentioned in CAN/CSA-C22.2 No. 62841-2-11, the CAN/CSA-C22.2 No. 62841-1 su
34、bclause applies. This UL 62841-2-11, Standard for Safety for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-11: Particular Requirements For Hand-Held Reciprocating Saws, is to be used in conjunction with the First edition of UL 62841-1. The r
35、equirements MARCH 27, 2017 CAN/CSA-C22.2 NO. 62841-2-11:17 UL 62841-2-11 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL for hand-held reciprocating saws are contained in this Part 2 Standard and UL 62841-1. Requirements of this Part 2 Stan
36、dard, where stated, amend the requirements of UL 62841-1. Where a particular subclause of UL 62841-1 is not mentioned in UL 62841-2-11, the UL 62841-1 subclause applies. Level of harmonization This standard adopts the IEC text with editorial national differences. This standard is published as an equ
37、ivalent standard for CSA Group and UL. An equivalent standard is a standard that is substantially the same in technical content, except as follows: Technical national differences are allowed for codes and governmental regulations as well as those recognized as being in accordance with NAFTA Article
38、905, for example, because of fundamental climatic, geographical, technological, or infrastructural factors, scientic justication, or the level of protection that the country considers appropriate. Presentation is word for word except for editorial changes. All national differences from the IEC text
39、are included in the CSA Group and UL versions of the standard. While the technical content is the same in each organizations version, the format and presentation may differ. Reasons for Differences From IEC National differences from the IEC are being added in order to address safety and regulatory s
40、ituations present in the US and Canada. Interpretations The interpretation by the standards development organization of an identical or equivalent standard is based on the literal text to determine compliance with the standard in accordance with the procedural rules of the standards development orga
41、nization. If more than one interpretation of the literal text has been identied, a revision is to be proposed as soon as possible to each of the standards development organizations to more accurately reect the intent. IEC Copyright For CSA Group, the text, gures, and tables of International Electrot
42、echnical Commission Publication IEC 62841-2-11 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-11: Particular Requirements For Hand-Held Reciprocating Saws, copyright 2015, are used in this standard with the consent of the International Electr
43、otechnical Commission. The IEC Foreword is not a part of the requirements of this standard but is included for information purposes only. These materials are subject to copyright claims of IEC and UL. No part of this publication may be reproduced in any form, including an electronic retrieval system
44、, without the prior written permission of UL. All requests pertaining to the Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-11: Particular Requirements For Hand-Held Reciprocating Saws, UL 62841-2-11 Standard should be submitted to UL. MARCH
45、27, 2017 CAN/CSA-C22.2 NO. 62841-2-11:17 UL 62841-2-11 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES National Differences from the text of the International Electrotechnical Commission (IEC) publication 62841-2-11, El
46、ectric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-11: Particular Requirements for Hand-Held Reciprocating Saws, copyright 2015 are indicated by notations (differences) and are presented in bold text. The national difference type is included in the
47、 body. There are ve types of National Differences as noted below. The difference type is noted on the rst line of the National Difference in the standard. The standard may not include all types of these National Differences. DR These are National Differences based on the national regulatory requirem
48、ents. D1 These are National Differences which are based on basic safety principles and requirements, elimination of which would compromise safety for consumers and users of products. D2 These are national differences from IEC requirements based on existing safety practices. These requirements reect
49、national safety practices, where empirical substantiation (for the IEC or national requirement) is not available or the text has not been included in the IEC standard. DC These are National Differences based on the component standards and will not be deleted until a particular component standard is harmonized with the IEC component standard. DE These are National Differences based on editorial comments or corrections.
