ANSI UL 923-2013 UL Standard for Safety Microwave Cooking Appliances (Seventh Edition Reprint with Revisions Through and Including July 19 2017)《微波烹饪用具标准》.pdf

上传人:deputyduring120 文档编号:439595 上传时间:2018-11-14 格式:PDF 页数:183 大小:1.40MB
下载 相关 举报
ANSI UL 923-2013 UL Standard for Safety Microwave Cooking Appliances (Seventh Edition Reprint with Revisions Through and Including July 19 2017)《微波烹饪用具标准》.pdf_第1页
第1页 / 共183页
ANSI UL 923-2013 UL Standard for Safety Microwave Cooking Appliances (Seventh Edition Reprint with Revisions Through and Including July 19 2017)《微波烹饪用具标准》.pdf_第2页
第2页 / 共183页
ANSI UL 923-2013 UL Standard for Safety Microwave Cooking Appliances (Seventh Edition Reprint with Revisions Through and Including July 19 2017)《微波烹饪用具标准》.pdf_第3页
第3页 / 共183页
ANSI UL 923-2013 UL Standard for Safety Microwave Cooking Appliances (Seventh Edition Reprint with Revisions Through and Including July 19 2017)《微波烹饪用具标准》.pdf_第4页
第4页 / 共183页
ANSI UL 923-2013 UL Standard for Safety Microwave Cooking Appliances (Seventh Edition Reprint with Revisions Through and Including July 19 2017)《微波烹饪用具标准》.pdf_第5页
第5页 / 共183页
亲,该文档总共183页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 923 Microwave Cooking Appliances STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTH

2、ORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Microwave Cooking Appliances, UL 923 Seventh Edition, Dated May 1, 2013 Summary of Topics The revisions to ANSI/UL 923 dated July 19, 2017, were issued to incorporate the following new and revised r

3、equirements: Clarify the Test Load of Leakage Current Test and Power Input Test The new and revised requirements are substantially in accordance with Proposal(s) on this subject dated June 9, 2017. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked wit

4、h a vertical line in the margin. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is wit

5、hout warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss

6、 of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of

7、 the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while

8、 purchaser is storing an electronic Standard on the purchasers computer system. JULY 19, 2017 UL 923 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JULY 19, 2017 UL 923 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR F

9、URTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL May 1, 2013 (Title Page Reprinted: July 19, 2017) 1 UL 923 Standard for Microwave Cooking Appliances First Edition October, 1977 Second Edition November, 1981 Third Edition August, 1990 Fourth Edition November, 1995 Fifth Edition May, 20

10、02 Sixth Edition April, 2008 Seventh Edition May 1, 2013 This ANSI/UL Standard for Safety consists of the Seventh Edition including revisions through July 19, 2017. The most recent designation of ANSI/UL 923 as an American National Standard (ANSI) occurred on July 19, 2017. ANSI approval for a stand

11、ard does not include the Cover Page, Transmittal Pages, and Title Page. The Department of Defense (DoD) has adopted UL 923 on June 29, 1990. The publication of revised pages or a new edition of this Standard will not invalidate the DoD adoption. Comments or proposals for revisions on any part of the

12、 Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any

13、 way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2017 UNDERWRITERS LABORATORIES INC. ANSI/UL 923-2017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PE

14、RMISSION FROM UL NOVEMBER 18, 2015 MICROWAVE COOKING APPLIANCES - UL 923 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .9 2 Glossary .9 CONSTRUCTION 3 General .13 4 Components 13 5 Frame

15、and Enclosure .14A 6 Accessibility of Live Parts .16 7 Protection Against Injury 20 7.1 General 20 7.2 Strength of mounting 21 7.3 Fans .21 8 Mechanical Assembly 21 9 Protection Against Corrosion 22 10 Interlocks 22 11 Interlock Monitors .23 12 Polymeric Materials .23 13 Supply Connections .26D 13.1

16、 Permanently-connected appliances .26D 13.2 Cord-connected appliances 29 14 Live Parts 31 15 Polarization 32 16 Internal Wiring 32 16.1 General .32 16.2 Splices and connections 35 17 Heating Elements .36 18 Electrical Insulation .37 18.1 General .37 18.2 Printed wiring board 38 18.3 Film-coated wire

17、 (magnet wire) 38 18.4 Insulation systems 38 19 Thermal Insulation 39 20 Motors .39 21 Motor Overload Protection .40 22 Short-Circuit and Ground-Fault Protection .41 22.1 General .41 22.2 Motors and power transformers 42 22.3 Receptacles .43 23 Thermostats 44 24 Thermal Cutoffs 44 25 Attachment-Plug

18、 Receptacles 45 26 Lampholders .45 27 Switches and Controls .46 27.1 General .46 27.2 Power output control circuits .49 28 Protective controls (Limiting controls) End Product Test Parameters 50 29 Filters .52 NOVEMBER 18, 2015 MICROWAVE COOKING APPLIANCES - UL 923 3UL COPYRIGHTED MATERIAL NOT AUTHOR

19、IZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 30 Spacings .52 31 Grounding 54 32 Secondary Circuits .54B 32.1 General .54B 32.2 Connections to frame 55 32.3 Separation of circuits 57 33 Transformers .57 34 Batteries and Battery Charging Circuits 57 35 Capacitors 58 36 Ligh

20、t Sources and Associated Components .59 PERFORMANCE 37 General 59 38 Leakage Current Test 60 39 Microwave Radiation Emission Test .63 39.1 General .63 39.2 Instrumentation .63 39.3 Cavity load .63 39.4 Supply voltage 63 39.5 Microwave radiation emission measurement 63 40 Power Input Test .64 40.1 Ge

21、neral .64 40.2 Supply voltage 64 40.3 Cavity load .64 40.4 Oven operation .64 41 Temperature Test .64 41.1 General .64 41.2 Temperature measurements 68 41.3 Installation 69 41.4 Supply voltage 79 41.5 Cavity load .79 41.6 Operating conditions .79 41.7 Motors used with solid-state controls 82 42 Surf

22、ace Temperature Tests 84 42.1 General .84 42.2 Measurement of surfaces 85 42.3 Measurement of handles and knobs .88 42.4 Over-the-cooktop appliances .88 43 Insulation Resistance and Leakage Current Test as a Result of Moisture 91 44 Dielectric Voltage-Withstand Test 91 44.1 General .91 44.2 Primary

23、circuits .92 44.3 Secondary circuits .94 45 Door Assembly Tests 96 45.1 Door operation 96 45.2 All doors .96 45.3 Side-hinged doors .97 45.4 Bottom-hinged doors 97 45.5 Impact tests 97 46 Glass Control Panel Test 98 47 Metal Enclosure Impact Test 99 48 Interlock System Endurance Test 102 NOVEMBER 18

24、, 2015 MICROWAVE COOKING APPLIANCES - UL 923 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 48.1 General 102 48.2 Appliance connections .102 48.3 Test equipment .102 48.4 Operating sequence .103 49 Interlock Monitor Circuit Test 104 50 Mec

25、hanical Endurance Test .105 51 Moisture Conditioning Test 105 52 Spill Test .106 53 Spill Test for Horizontally-Mounted Openings .106 54 Abnormal Operation Tests 107 54.1 General 107 54.2 Appliance connections .107 54.3 Appliance conguration 108 54.4 Test duration .108 54.5 Shorted thermostat test 1

26、09 55 Abnormal Operation Tests on Motors Used With Solid-State Controls 110 56 Abnormal Operation Fire Isolation Test .111 57 Magnetically Operated Interlock Test .115 58 X-Radiation Test .115 58.1 General 115 58.2 X-radiation under servicing conditions .116 59 Temperature Control Tests .116 60 Temp

27、erature Probe Test 117 61 Motor Switch Test .117 62 Interlock Malfunction Test .118 63 Salt Spray Corrosion Test 118 64 Cavity Fire Containment Test .119 64A Forced Failure Fire Containment Tests 119 64A.1 General .119 64A.2 Potato re containment test .120 64A.3 Waveguide and stirrer re containment

28、test .121 64A.4 Popcorn re containment test .121 64A.5 Thermally protected AC fan motor ignition test 121 64A.6 Nichrome wire ignition tests .122 65 Strength of Mounting Test .122A 66 Tests on Motors Exposed to Grease or Cooking Vapors 122B 66.1 General .122B 66.2 Grease conditioning 122C 66.3 Oven

29、and humidity conditioning .122C MANUFACTURING AND PRODUCTION-LINE TESTS 67 Dielectric Voltage-Withstand Test 123 68 Grounding-Continuity Test 125 RATING 69 Details .125 MARKINGS 70 General 126 NOVEMBER 18, 2015 MICROWAVE COOKING APPLIANCES - UL 923 4AUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHE

30、R REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 71 Visible After Installation .126 71.1 General 126 71.2 Combination microwave oven hood fans .128 72 Visible to the User During Use 129 73 Visible During Installation and Examination .129 74 Instruction Manuals 133 75 Important Safety Instru

31、ctions 134 75.1 General 134 75.2 Over-the-cooktop microwave ovens .137 75.3 Microwave oven-vent hood fans .137 75.4 Self-cleaning appliances .137 76 Warning Markings and Instructions Concerning Microwave and X-Radiation Emission .137 77 Grounding Instructions .140 SELF-CLEANING OVENS GENERAL 78 Scop

32、e 141 CONSTRUCTION 79 Materials .142 79.1 Oven coating .142 79.2 Smoke eliminators .142 79.3 Oven vent tubes and smoke diverters .142 80 Oven Door Latch/Interlock Assembly .142 81 Seals and Gaskets .143 PERFORMANCE 82 General 143 83 Temperature Test 144 83.1 General 144 83.2 Normal temperature .144

33、84 Latch-Solenoid Temperature Test 144 85 Shorted Thermostat Abnormal Test 145 86 Oven-Door Latch Endurance Test .145 87 Window Impact Tests 145 FIRE AND EXPLOSION 88 General 146 89 Test Electrodes 147 90 Test Samples .147 91 Installation of Test Sample 147 92 Fire and Explosion Test Within Oven .14

34、9 93 Emission of Carbon Monoxide .149 94 Vent Gases and Vapors Test .150 95 Vertical Cool-Air-Mixing Duct Test .151 96 Self-Cleaning of Removable Companion Oven Panels Test .151 97 Elevated Interlock Operating Temperature Tests 152 NOVEMBER 18, 2015 MICROWAVE COOKING APPLIANCES - UL 923 4BUL COPYRIG

35、HTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MARKING 98 Details .152 NOVEMBER 18, 2015 MICROWAVE COOKING APPLIANCES - UL 923 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NOVEMBER 18, 20

36、15 MICROWAVE COOKING APPLIANCES - UL 923 6 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SUPPLEMENT SA - MICROWAVE COOKING APPLIANCES FOR MARINE USE GENERAL SA1 Scope SA1 CONSTRUCTION SA2 Mounting .SA1 SA3 Corrosion SA1

37、 SA4 Supply Connections .SA1 SA4.1 Permanently-connected appliances SA1 SA4.2 Cord-connected appliances SA2 SA5 Internal Wiring .SA2 SA6 Electrical Connections .SA2 PERFORMANCE SA7 General SA2 SA8 Vibration Test SA2 SA9 Shock Test .SA3 SA10 Salt Spray Corrosion Test SA3 MARKINGS SA11 Visible After I

38、nstallation .SA4 SA12 Visible During Installation and Examination SA4 SUPPLEMENT SB - MICROWAVE COOKING APPLIANCES EMPLOYING TUNGSTEN-HALOGEN LAMPS GENERAL SB1 Scope SB1 CONSTRUCTION SB2 Interlocks .SB1 SB3 Switches and Controls .SB2 PROTECTION AGAINST INJURY TO PERSONS SB4 Lamps SB2 SB5 Impact .SB3

39、 SB6 Thermal Shock .SB3 SB6.1 Spillage SB3 SB6.2 Splashing SB3 MAY 1, 2013 MICROWAVE COOKING APPLIANCES - UL 923 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PERFORMANCE SB7 Cavity load SB4 SB8 Ultraviolet Radiation Emission Test .SB4 SB

40、9 Markings .SB5 MAY 1, 2013 MICROWAVE COOKING APPLIANCES - UL 923 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements cover household and commercial microwave cooking appliances operated in the Indust

41、rial, Scientic and Medical (ISM) bands of 915 25 and 2450 50 MHz, for use in ordinary locations in accordance with the National Electrical Code, NFPA 70, and rated not more than 600 V. 1.2 These requirements also cover microwave cooking appliances intended for built-in installation, side-by-side mou

42、nting, stacking, wall mounting and installation over ranges. 1.3 For the purpose of these requirements, commercial microwave cooking equipment is that usually found in commercial kitchens, restaurants, or other business establishments where food may be dispensed. Household microwave cooking equipmen

43、t is that intended for household use. 1.4 These requirements also cover the microwave cooking portion of a household electric range. The combination is to comply with the Standard for Household Electric Ranges, UL 858. 2 Glossary 2.1 For the purpose of this standard the following denitions apply. 2.

44、2 AUTOMATICALLY CONTROLLED APPLIANCE An appliance is considered to be automatically controlled under any one or more of the following conditions: a) If the repeated starting of the appliance, beyond one complete predetermined cycle of operation, is independent of any manual control; b) If, during an

45、y single predetermined cycle of operation, the appliance is caused to stop and restart, or change operating modes one or more times; or c) If, upon energizing the appliance, the initial starting of a motor may be intentionally delayed beyond normal, conventional starting. 2.3 CAVITY That portion of

46、the microwave cooking appliance in which food may be heated, cooked, or dried. 2.4 CLASS 2 CIRCUIT An isolated secondary circuit involving a potential of not more than 42.4 V peak supplied by: a) An inherently-limited Class 2 transformer; b) A combination of an isolated transformer secondary winding

47、 and a xed impedance or regulating network that together comply with the performance requirements for an inherently- limited Class 2 transformer; c) A dry-cell battery having output characteristics not greater than those of an inherently-limited Class 2 transformer; d) Any combination of (a), (b), a

48、nd (c) that together comply with the performance requirements for an inherently-limited Class 2 transformer; or NOVEMBER 18, 2015 MICROWAVE COOKING APPLIANCES - UL 923 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL e) One or more combinati

49、ons of a Class 2 transformer and an overcurrent protective device that together comply with the performance requirements for a noninherently-limited Class 2 transformer. A circuit derived from a line-connected circuit by connecting impedance in series with the supply circuit as a means of limiting the voltage and current is not considered to be a Class 2 circuit. See Secondary Circuits, Section 32. 2.5 CONTROL, AUTOMATIC ACTION A control in which at least one aspect is non-manual. 2.6 CONTROL, AU

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1