1、c 4 A-A-52 124 March 31, 1993 REPAIR KIT, TAPE, PRESSURE SENSITIVE AMIESNE (PSA) The General Services IMninistration has authorized the use of this Cannemial Item Description. Abstract. adhesive (pa) tap repair kit for the Parka and Trwsers, Extended Cold Weather Clothing System (m) . This camrercia
2、l item description covers a pressure sensitive 1.1 Description. ply bag containing a highly aggressive pressure sensitive adhesive tap (3 by 15 inches) with a rubber based adhesive specifically fomlated for cold temperatures below O%, a thermoset piprethane barrier coating anti a nylon tricot knit s
3、ubstrate, set on a differential silicone coated release liner (folded, not rolled); and an unfolded instruction sheet on how to and where to apply the tap, instructions facing out. The repair kit shall consist of a zip lock (resealable) 1.2 Material. 1.2.1 Kit bag. closure. length and 4-1/2 _+ 1/2 i
4、nches in width. side seams. The kit bag shall be ply bag with zip lock (resealable) The finished dimensions of the bag shall be 6-1/2 _+ 1/2 inches in The bag shall have two heat sealed 1.2.2 Physical mouerties of ta=. as follows: The physical properties of tape shall be Adhesive thichess, inch O. 0
5、05 Peel strength, pli (Pounds per linear yard) min. I/ 8.0 Peel bond 1 second g min. 2/ 1500 Beneficial camientc, (recamiendations, additions, deletions) and any pertinent data which niay be used in improving this document should be addressed to: Center, Natick, MA 01760-5019 by using the Standardi
6、zation Document Irrprovement Proposal (DD Form 1426) appearing at the end of this document or by letter. U.S. Army Natick Research, Developnent, and Engineering AMS N/A FSC 7510 DISTRIEUTION STATEMEW A. plpproed for public release; distribution is uniimitei. Licensed by Information Handling Services
7、A-A-52124 - 1/ Peel strength is measured using Pressure Sensitive Tape Council (PSE) No. 1. Test Methoci: Peel Adhesion for Single Coated Pressure Sensitive Tape 180 Angle. - 2/ Peel Bond is measured using camrercial industries Polyten Tack Test Method. 1.2.3 Barrier taue coating. adhesive and the t
8、ricot knit substrate shall be thermoset polyurethane and with a thickness of 2 f 0.25 mil. The barrier tape coating in bebeen the 1.2.4 Cloth, for adhesive tam. The cloth for adhesive tape shall be made of nylon, tricot knit and weigh 1.5 _+ 0.3 oz. per square yard. 1.2.5 Dimensions. 1/16 by 15 _+ 1
9、/4 inches. The finished dimensions of the repair tape shall be 3 _+ 1.2.6 Color. The color of the tape shall be Olive Green 106. 1.2.7 Pauer release liner. silicone coated release liner. The paper release liner shall be differential 1.3 Instructions sheet for use. The instructions sheet for use shal
10、l be unfolded and placed inside the sealed kit with the mrding facing out on the opposite side of the item description label (see 1.3.1) and shall be as f ollaws : ECKS Parka and Trousers Repair Kit * Best adhesion results are achieved with a clean, dry surface. * Cut a desired length of tape with a
11、 pocket knife. Dimensions should be 1 inch longer and wider than the rip/tear. Use the full width (3 inches) of the tape whenever possible. * Remwe paper backing with knife blade along tape 2 Licensed by Information Handling ServicesA-A-52124 W 9999974 0144813 044 A-A-52124 edge. Turn garment inside
12、 out (parka can be turned through the middle back lining). Place tap over rip/- on the inside of garment- * Use paper backing as shield over tap and apply pressure with handie of hife. AppLYVIQxous PRESSURE to the entire patch. 1.3.1 Labelinq. outside with the following information: The kit bag shal
13、l have an adhesive label affixed to the Item Description “ Contract NLmiber Contractors Nanie 2.1 Certification. The contractor shall certify, and maintain substanti- ating evidence, that the prcduct offered mets the salient characteristics of this Cormiercial Item Description, and that the product
14、conform to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivexy and thereafter as may be otherwise provided for under the provisions of of the contract. 2.2 Requlatorv re
15、qu irementS. The offeror/contractor is encouraged to use recovered materials in accordance with Public Lsw 94-580 to the niaXimmi extent practical. 2.3 Metric product. products manufactured using metric units will be considered on an equal basis with those manufactured using inch-pound units, provid
16、ed that the product remmments fall within specified tolerances using conversion tables contained in the latest revision of FED-376 and that all other requirements of this CID are met. 3. PACKAGING 3.1 Overseas. 3.1.1 Packauing. The kit shall be closed and stacked. 3 Licensed by Information Handling
17、Services3.1. A -A05 21 2 4 9999974 0144814 T8O A-A-52 124 Packinq. Five hw-ed kits shall be packed in a fiberfioard box conforming to style Rsc-L, grade 275 of WP-B-636. the box shall be approximately 23-1/2 inches in length, 10 inches in width, and 10 inches in depth. appendix of PPP-B-636. The ins
18、ide dimensions of The box shall be closed in accordance with the 3.1.3 Palletization. pallet in accordance with load type Ia of MIL-SID-147. shall be bonded with primary and secondary straps in accordance with bonding means C accordance with the appendix of MIL-147. Ovenmnent documents. ASiM D 3951
19、- Standard Practices for -mial Packaging (Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.) psI13-1 - Wt Methods For Pressure Sensitive Tapes (Developed by the Specifications and Technical Ccmnittee of the Pr
20、essure Sensitive Tape council, 1800 Pickwick Avenue, Glenview, IL 60025-1377.) 4 Licensed by Information Handling Services. d A-A-52124 = 9999974 OI144815 917 MILITARY IVlERESTS: Custodians Army-a Air Force - 99 Review Activities A-A-52124 CIVIL AGENCY COORDINATING ACTIVITY: GSA - Fss PREPARING ACTIVITY: Army-GL Project 7510-0374 Army-m Navy - K Air Force - 82 DLA - CI 5 Licensed by Information Handling Services
