1、I INCH-POUND I A-A-525 12 Aumist 18. 1995 SUPERSEDING 26 August 1986 MIL-W-3783C Beneficial comments, recommendations, additions, deletions carilcations, etc. and any other data which may improve this document should be sent by letter to: U.S. Army Tank-automotive and distribution is unlimited. Prov
2、ided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-525LZ m 9999974 Ohb8OY5 ab2 m A-A-525 12 ! 2.2 Design and construction. The winch shall be designed and constructed as specified herein. The winch shaU consist of an air-motor-driven, single drum assemb
3、led in a Complete, compact unit on a mounting base. The winch shall be equipped with a cable and swivel-hook, with safety latch, speed of not less than 120 feet per minute (fpm). The air consumption at the rated load and speed shail be not more than 3 15 cubic feet per minute (ch) (60 degrees Fahren
4、heit OF fiee air) at 80 pounds per square inch (psi) at the inlet. The winch shail be capable of liftin SAE J534 “Lubrication Fittings”; SAE J614B Engine and Transmission Dipstick Marking”; SAE J754A “Lubrication Types- Construction and Industxiai Equipment”; SAE 5833 “USA Human Physical Dimensions”
5、; and SAE 5925 Minimum Service Access Dimensions for Off-Road Machines7 are adable fiom the American Society of Automotive Engineers, nc., 400 Commonwealth Drive, Warrendale, PA 15096-O00 1. Mormation concerning welding qualification tests is available fiom the American Welding Society, Inc., 550 N.
6、W. LeJeune Road, Miami, FL 33126. 5.2 Ordering data. Acquisition documents must speciSr the following: a. Title, number, and date of this CID. b. Issue of Department of Defense Index of Specifications and Standards (DODISS) to be cited in the solicitation and the specific issue of individual documen
7、ts referenced. c. When resistance to saline atmosphere is required d. Type of font and size of type for instruction plates if other than as specified. e. Layout of instruction plates. 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-525 12 f PIN
8、 and quantity of winches required. g. IfCARC nsh is required. h. Color of paint final coat. i. Selection of applicable level and packagmg requirements. 5.3 Cross reference data. The winch conforming to this CID is interchangeablehbstitutable with the winch conforming to MIL-W-3783C. 5.4 Remlatory re
9、quirements. The offerorkontractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. MILITARY INTERESTS: Custodians: CIVE AGENCY COORDINATING ACTIVITY: GSA - FSS Army - AT PREPARING ACTIVITY: Au. Force - 99 Army - AT Review activities: Navy - SA DLA - CS 8 b (Project 3950-0304) 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
